diff mbox series

[v7,1/4] dt-bindings: input: touchscreen: goodix: Document regulator properties

Message ID 20190321082104.2874-2-jagan@amarulasolutions.com (mailing list archive)
State Accepted
Headers show
Series input: touchscreen: Add goodix GT5553 CTP support | expand

Commit Message

Jagan Teki March 21, 2019, 8:21 a.m. UTC 
Goodix CTP controllers support analog, digital and gpio regulator
supplies on relevant controller pin configurations.

Out of which AVDD28 and VDDIO regulators are required in few goodix CTP
chips during power-on sequence.

AVDD22, DVDD12 regulators have no relevant functionality described from
datasheet [1].

So, document both AVDD28, VDDIO regulators into optional properties since
few of the goodix chip do work without these regulator power-on sequence.

[1] GT5663 Datasheet_English_20151106_Rev.01

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index 8cf0b4d38a7e..255673250bbd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -19,6 +19,8 @@  Optional properties:
  - irq-gpios		: GPIO pin used for IRQ. The driver uses the
 			  interrupt gpio pin as output to reset the device.
  - reset-gpios		: GPIO pin used for reset
+ - AVDD28-supply	: Analog power supply regulator on AVDD28 pin
+ - VDDIO-supply		: GPIO power supply regulator on VDDIO pin
  - touchscreen-inverted-x
  - touchscreen-inverted-y
  - touchscreen-size-x