diff mbox series

[v8,03/11] dt-bindings: leds: add DT bindings for max77650

Message ID 20190403090108.24788-4-brgl@bgdev.pl (mailing list archive)
State Superseded
Headers show
Series mfd: add support for max77650 PMIC | expand

Commit Message

Bartosz Golaszewski April 3, 2019, 9:01 a.m. UTC 
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the DT binding document for the LEDs module of max77650.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/leds/leds-max77650.txt           | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-max77650.txt

Comments

Pavel Machek April 4, 2019, 1:22 p.m. UTC | #1 
On Wed 2019-04-03 11:01:00, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Add the DT binding document for the LEDs module of max77650.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Acked-by: Pavel Machek <pavel@ucw.cz>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.txt b/Documentation/devicetree/bindings/leds/leds-max77650.txt
new file mode 100644
index 000000000000..3a67115cc1da
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.txt
@@ -0,0 +1,57 @@ 
+LED driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The LED controller is represented as a sub-node of the PMIC node on
+the device tree.
+
+This device has three current sinks.
+
+Required properties:
+--------------------
+- compatible:		Must be "maxim,max77650-led"
+- #address-cells:	Must be <1>.
+- #size-cells:		Must be <0>.
+
+Each LED is represented as a sub-node of the LED-controller node. Up to
+three sub-nodes can be defined.
+
+Required properties of the sub-node:
+------------------------------------
+
+- reg:			Must be <0>, <1> or <2>.
+
+Optional properties of the sub-node:
+------------------------------------
+
+- label:		See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt
+
+For more details, please refer to the generic GPIO DT binding document
+<devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+
+	leds {
+		compatible = "maxim,max77650-led";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			label = "blue:usr0";
+		};
+
+		led@1 {
+			reg = <1>;
+			label = "red:usr1";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led@2 {
+			reg = <2>;
+			label = "green:usr2";
+		};
+	};