diff mbox series

[v3,7/7] Input: add IOC3 serio driver

Message ID 20190613170636.6647-8-tbogendoerfer@suse.de (mailing list archive)
State Superseded
Headers show
Series Use MFD framework for SGI IOC3 drivers | expand

Commit Message

Thomas Bogendoerfer June 13, 2019, 5:06 p.m. UTC 
This patch adds a platform driver for supporting keyboard and mouse
interface of SGI IOC3 chips.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/input/serio/Kconfig   |  10 +++
 drivers/input/serio/Makefile  |   1 +
 drivers/input/serio/ioc3kbd.c | 158 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 169 insertions(+)
 create mode 100644 drivers/input/serio/ioc3kbd.c

Comments

Dmitry Torokhov July 1, 2019, 8:19 a.m. UTC | #1 
Hi Thomas,

On Thu, Jun 13, 2019 at 07:06:33PM +0200, Thomas Bogendoerfer wrote:
> This patch adds a platform driver for supporting keyboard and mouse
> interface of SGI IOC3 chips.
> 
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> ---
>  drivers/input/serio/Kconfig   |  10 +++
>  drivers/input/serio/Makefile  |   1 +
>  drivers/input/serio/ioc3kbd.c | 158 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 169 insertions(+)
>  create mode 100644 drivers/input/serio/ioc3kbd.c
> 
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index f3e18f8ef9ca..373a1646019e 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -165,6 +165,16 @@ config SERIO_MACEPS2
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called maceps2.
>  
> +config SERIO_SGI_IOC3
> +	tristate "SGI IOC3 PS/2 controller"
> +	depends on SGI_MFD_IOC3
> +	help
> +	  Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
> +	  and you want to attach and use a keyboard, mouse, or both.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ioc3kbd.
> +
>  config SERIO_LIBPS2
>  	tristate "PS/2 driver library"
>  	depends on SERIO_I8042 || SERIO_I8042=n
> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> index 67950a5ccb3f..6d97bad7b844 100644
> --- a/drivers/input/serio/Makefile
> +++ b/drivers/input/serio/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_HIL_MLC)		+= hp_sdc_mlc.o hil_mlc.o
>  obj-$(CONFIG_SERIO_PCIPS2)	+= pcips2.o
>  obj-$(CONFIG_SERIO_PS2MULT)	+= ps2mult.o
>  obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
> +obj-$(CONFIG_SERIO_SGI_IOC3)	+= ioc3kbd.o
>  obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
>  obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
>  obj-$(CONFIG_SERIO_AMS_DELTA)	+= ams_delta_serio.o
> diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
> new file mode 100644
> index 000000000000..26fcf57465d6
> --- /dev/null
> +++ b/drivers/input/serio/ioc3kbd.c
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SGI IOC3 PS/2 controller driver for linux
> + *
> + * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
> + *
> + * Based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
> + *               Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/serio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/sn/ioc3.h>
> +
> +struct ioc3kbd_data {
> +	struct ioc3_serioregs __iomem *regs;
> +	struct serio *kbd, *aux;
> +};
> +
> +static int ioc3kbd_write(struct serio *dev, u8 val)
> +{
> +	struct ioc3kbd_data *d = dev->port_data;
> +	unsigned long timeout = 0;
> +	u32 mask;
> +
> +	mask = (dev == d->aux) ? KM_CSR_M_WRT_PEND : KM_CSR_K_WRT_PEND;
> +	while ((readl(&d->regs->km_csr) & mask) && (timeout < 1000)) {
> +		udelay(100);
> +		timeout++;
> +	}
> +
> +	if (timeout >= 1000)
> +		return -1;

-ETIMEDOUT?

> +
> +	writel(val, dev == d->aux ?  &d->regs->m_wd : &d->regs->k_wd);

Nit: there are 2 spaces after ?, only one is needed.

> +
> +	return 0;
> +}
> +
> +static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
> +{
> +	struct ioc3kbd_data *d = dev_id;
> +	u32 data_k, data_m;
> +
> +	data_k = readl(&d->regs->k_rd);
> +	data_m = readl(&d->regs->m_rd);
> +
> +	if (data_k & KM_RD_VALID_0)
> +		serio_interrupt(d->kbd,
> +		(data_k >> KM_RD_DATA_0_SHIFT) & 0xff, 0);

This is weird formatting, you need one more tab here.

> +	if (data_k & KM_RD_VALID_1)
> +		serio_interrupt(d->kbd,
> +		(data_k >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
> +	if (data_k & KM_RD_VALID_2)
> +		serio_interrupt(d->kbd,
> +		(data_k >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
> +	if (data_m & KM_RD_VALID_0)
> +		serio_interrupt(d->aux,
> +		(data_m >> KM_RD_DATA_0_SHIFT) & 0xff, 0);
> +	if (data_m & KM_RD_VALID_1)
> +		serio_interrupt(d->aux,
> +		(data_m >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
> +	if (data_m & KM_RD_VALID_2)
> +		serio_interrupt(d->aux,
> +		(data_m >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
> +
> +	return 0;
> +}
> +
> +static int ioc3kbd_probe(struct platform_device *pdev)
> +{
> +	struct ioc3_serioregs __iomem *regs;
> +	struct device *dev = &pdev->dev;
> +	struct ioc3kbd_data *d;
> +	struct serio *sk, *sa;
> +	struct resource *mem;
> +	int irq, ret;
> +
> +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	regs = devm_ioremap_resource(&pdev->dev, mem);

We have a brand new helper: devm_platform_ioremap_resource()

> +	if (IS_ERR(regs))
> +		return PTR_ERR(regs);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return -ENXIO;
> +
> +	d = devm_kzalloc(&pdev->dev, sizeof(struct ioc3kbd_data), GFP_KERNEL);

I think we nor prefer deriving type from the pointer:

	d = evm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);

> +	if (!d)
> +		return -ENOMEM;
> +
> +	ret = devm_request_irq(&pdev->dev, irq, ioc3kbd_intr, IRQF_SHARED,
> +			       "ioc3-kbd", d);
> +	if (ret) {
> +		dev_err(&pdev->dev, "could not request IRQ %d\n", irq);
> +		return ret;
> +	}

You need to make sure that interrupt will not fire while serio ports are
not yet allocated/registered. Is there a way to inhibit interrupt
generation on controller side?

> +
> +	sk = kzalloc(sizeof(struct serio), GFP_KERNEL);

	sk = kzalloc(sizeof(*sk), GFP_KERNEL);

> +	if (!sk)
> +		return -ENOMEM;
> +
> +	sa = kzalloc(sizeof(struct serio), GFP_KERNEL);

	sa = kzalloc(sizeof(*sa), GFP_KERNEL);

> +	if (!sa) {
> +		kfree(sk);
> +		return -ENOMEM;
> +	}
> +
> +	sk->id.type = SERIO_8042;
> +	sk->write = ioc3kbd_write;
> +	snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
> +	snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
> +	sk->port_data = d;
> +	sk->dev.parent = &pdev->dev;
> +
> +	sa->id.type = SERIO_8042;
> +	sa->write = ioc3kbd_write;
> +	snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
> +	snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
> +	sa->port_data = d;
> +	sa->dev.parent = dev;
> +
> +	d->regs = regs;
> +	d->kbd = sk;
> +	d->aux = sa;
> +
> +	platform_set_drvdata(pdev, d);
> +	serio_register_port(d->kbd);
> +	serio_register_port(d->aux);
> +	return 0;
> +}
> +
> +static int ioc3kbd_remove(struct platform_device *pdev)
> +{
> +	struct ioc3kbd_data *d = platform_get_drvdata(pdev);
> +
> +	serio_unregister_port(d->kbd);
> +	serio_unregister_port(d->aux);

If you unregister ports while interrupt is registered/enabled you may
get a crash.

> +	return 0;
> +}
> +
> +static struct platform_driver ioc3kbd_driver = {
> +	.probe          = ioc3kbd_probe,
> +	.remove         = ioc3kbd_remove,
> +	.driver = {
> +		.name = "ioc3-kbd",
> +	},
> +};
> +module_platform_driver(ioc3kbd_driver);
> +
> +MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
> +MODULE_DESCRIPTION("SGI IOC3 serio driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.13.7
>
diff mbox series

Patch

diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f3e18f8ef9ca..373a1646019e 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -165,6 +165,16 @@  config SERIO_MACEPS2
 	  To compile this driver as a module, choose M here: the
 	  module will be called maceps2.
 
+config SERIO_SGI_IOC3
+	tristate "SGI IOC3 PS/2 controller"
+	depends on SGI_MFD_IOC3
+	help
+	  Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
+	  and you want to attach and use a keyboard, mouse, or both.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ioc3kbd.
+
 config SERIO_LIBPS2
 	tristate "PS/2 driver library"
 	depends on SERIO_I8042 || SERIO_I8042=n
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
index 67950a5ccb3f..6d97bad7b844 100644
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
@@ -20,6 +20,7 @@  obj-$(CONFIG_HIL_MLC)		+= hp_sdc_mlc.o hil_mlc.o
 obj-$(CONFIG_SERIO_PCIPS2)	+= pcips2.o
 obj-$(CONFIG_SERIO_PS2MULT)	+= ps2mult.o
 obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
+obj-$(CONFIG_SERIO_SGI_IOC3)	+= ioc3kbd.o
 obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
 obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
 obj-$(CONFIG_SERIO_AMS_DELTA)	+= ams_delta_serio.o
diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
new file mode 100644
index 000000000000..26fcf57465d6
--- /dev/null
+++ b/drivers/input/serio/ioc3kbd.c
@@ -0,0 +1,158 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 PS/2 controller driver for linux
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
+ *
+ * Based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
+ *               Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/sn/ioc3.h>
+
+struct ioc3kbd_data {
+	struct ioc3_serioregs __iomem *regs;
+	struct serio *kbd, *aux;
+};
+
+static int ioc3kbd_write(struct serio *dev, u8 val)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+	unsigned long timeout = 0;
+	u32 mask;
+
+	mask = (dev == d->aux) ? KM_CSR_M_WRT_PEND : KM_CSR_K_WRT_PEND;
+	while ((readl(&d->regs->km_csr) & mask) && (timeout < 1000)) {
+		udelay(100);
+		timeout++;
+	}
+
+	if (timeout >= 1000)
+		return -1;
+
+	writel(val, dev == d->aux ?  &d->regs->m_wd : &d->regs->k_wd);
+
+	return 0;
+}
+
+static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
+{
+	struct ioc3kbd_data *d = dev_id;
+	u32 data_k, data_m;
+
+	data_k = readl(&d->regs->k_rd);
+	data_m = readl(&d->regs->m_rd);
+
+	if (data_k & KM_RD_VALID_0)
+		serio_interrupt(d->kbd,
+		(data_k >> KM_RD_DATA_0_SHIFT) & 0xff, 0);
+	if (data_k & KM_RD_VALID_1)
+		serio_interrupt(d->kbd,
+		(data_k >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
+	if (data_k & KM_RD_VALID_2)
+		serio_interrupt(d->kbd,
+		(data_k >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
+	if (data_m & KM_RD_VALID_0)
+		serio_interrupt(d->aux,
+		(data_m >> KM_RD_DATA_0_SHIFT) & 0xff, 0);
+	if (data_m & KM_RD_VALID_1)
+		serio_interrupt(d->aux,
+		(data_m >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
+	if (data_m & KM_RD_VALID_2)
+		serio_interrupt(d->aux,
+		(data_m >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
+
+	return 0;
+}
+
+static int ioc3kbd_probe(struct platform_device *pdev)
+{
+	struct ioc3_serioregs __iomem *regs;
+	struct device *dev = &pdev->dev;
+	struct ioc3kbd_data *d;
+	struct serio *sk, *sa;
+	struct resource *mem;
+	int irq, ret;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	d = devm_kzalloc(&pdev->dev, sizeof(struct ioc3kbd_data), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	ret = devm_request_irq(&pdev->dev, irq, ioc3kbd_intr, IRQF_SHARED,
+			       "ioc3-kbd", d);
+	if (ret) {
+		dev_err(&pdev->dev, "could not request IRQ %d\n", irq);
+		return ret;
+	}
+
+	sk = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!sk)
+		return -ENOMEM;
+
+	sa = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!sa) {
+		kfree(sk);
+		return -ENOMEM;
+	}
+
+	sk->id.type = SERIO_8042;
+	sk->write = ioc3kbd_write;
+	snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
+	snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
+	sk->port_data = d;
+	sk->dev.parent = &pdev->dev;
+
+	sa->id.type = SERIO_8042;
+	sa->write = ioc3kbd_write;
+	snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
+	snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
+	sa->port_data = d;
+	sa->dev.parent = dev;
+
+	d->regs = regs;
+	d->kbd = sk;
+	d->aux = sa;
+
+	platform_set_drvdata(pdev, d);
+	serio_register_port(d->kbd);
+	serio_register_port(d->aux);
+	return 0;
+}
+
+static int ioc3kbd_remove(struct platform_device *pdev)
+{
+	struct ioc3kbd_data *d = platform_get_drvdata(pdev);
+
+	serio_unregister_port(d->kbd);
+	serio_unregister_port(d->aux);
+	return 0;
+}
+
+static struct platform_driver ioc3kbd_driver = {
+	.probe          = ioc3kbd_probe,
+	.remove         = ioc3kbd_remove,
+	.driver = {
+		.name = "ioc3-kbd",
+	},
+};
+module_platform_driver(ioc3kbd_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI IOC3 serio driver");
+MODULE_LICENSE("GPL");