@@ -240,9 +240,8 @@ static int asus_report_input(struct asus_drvdata *drvdat, u8 *data, int size)
MT_TOOL_PALM : MT_TOOL_FINGER;
input_mt_slot(drvdat->input, i);
- input_mt_report_slot_state(drvdat->input, toolType, down);
- if (down) {
+ if (input_mt_report_slot_state(drvdat->input, toolType, down)) {
asus_report_contact_down(drvdat, toolType, contactData);
contactData += drvdat->tp->contact_size;
}
@@ -216,8 +216,7 @@ static void elan_report_mt_slot(struct elan_drvdata *drvdata, u8 *data,
bool active = !!data;
input_mt_slot(input, slot_num);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, active);
- if (active) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER, active)) {
x = ((data[0] & 0xF0) << 4) | data[1];
y = drvdata->max_y -
(((data[0] & 0x07) << 8) | data[2]);
@@ -2295,9 +2295,8 @@ static void wtp_touch_event(struct hidpp_device *hidpp,
slot = input_mt_get_slot_by_key(hidpp->input, touch_report->finger_id);
input_mt_slot(hidpp->input, slot);
- input_mt_report_slot_state(hidpp->input, MT_TOOL_FINGER,
- touch_report->contact_status);
- if (touch_report->contact_status) {
+ if (input_mt_report_slot_state(hidpp->input, MT_TOOL_FINGER,
+ touch_report->contact_status)) {
input_event(hidpp->input, EV_ABS, ABS_MT_POSITION_X,
touch_report->x);
input_event(hidpp->input, EV_ABS, ABS_MT_POSITION_Y,
@@ -282,10 +282,9 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda
msc->ntouches++;
input_mt_slot(input, id);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, down);
/* Generate the input events for this touch. */
- if (down) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER, down)) {
input_report_abs(input, ABS_MT_TOUCH_MAJOR, touch_major << 2);
input_report_abs(input, ABS_MT_TOUCH_MINOR, touch_minor << 2);
input_report_abs(input, ABS_MT_ORIENTATION, -orientation);
@@ -1020,8 +1020,7 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
}
input_mt_slot(input, slotnum);
- input_mt_report_slot_state(input, tool, active);
- if (active) {
+ if (input_mt_report_slot_state(input, tool, active)) {
/* this finger is in proximity of the sensor */
int wide = (*slot->w > *slot->h);
int major = max(*slot->w, *slot->h);
@@ -1092,9 +1092,9 @@ static void dualshock4_parse_report(struct sony_sc *sc, u8 *rd, int size)
active = !(rd[offset] >> 7);
input_mt_slot(sc->touchpad, n);
- input_mt_report_slot_state(sc->touchpad, MT_TOOL_FINGER, active);
- if (active) {
+ if (input_mt_report_slot_state(sc->touchpad,
+ MT_TOOL_FINGER, active)) {
input_report_abs(sc->touchpad, ABS_MT_POSITION_X, x);
input_report_abs(sc->touchpad, ABS_MT_POSITION_Y, y);
}
@@ -1146,9 +1146,9 @@ static void nsg_mrxu_parse_report(struct sony_sc *sc, u8 *rd, int size)
y = ((rd[offset+1] & 0xF0) >> 4) | (rd[offset+2] << 4);
input_mt_slot(sc->touchpad, n);
- input_mt_report_slot_state(sc->touchpad, MT_TOOL_FINGER, active & 0x03);
- if (active & 0x03) {
+ if (input_mt_report_slot_state(sc->touchpad,
+ MT_TOOL_FINGER, active & 0x03)) {
contactx = rd[offset+3] & 0x0F;
contacty = rd[offset+3] >> 4;
input_report_abs(sc->touchpad, ABS_MT_TOUCH_MAJOR,
@@ -1504,9 +1504,8 @@ static int wacom_24hdt_irq(struct wacom_wac *wacom)
if (slot < 0)
continue;
input_mt_slot(input, slot);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
- if (touch) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) {
int t_x = get_unaligned_le16(&data[offset + 2]);
int t_y = get_unaligned_le16(&data[offset + 4 + y_offset]);
@@ -1570,8 +1569,7 @@ static int wacom_mt_touch(struct wacom_wac *wacom)
continue;
input_mt_slot(input, slot);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
- if (touch) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) {
int x = get_unaligned_le16(&data[offset + x_offset + 7]);
int y = get_unaligned_le16(&data[offset + x_offset + 9]);
input_report_abs(input, ABS_MT_POSITION_X, x);
@@ -1599,8 +1597,7 @@ static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
bool touch = p && report_touch_events(wacom);
input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
- if (touch) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) {
int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
@@ -2842,8 +2839,7 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
&& (data[offset + 3] & 0x80);
input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
- if (touch) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) {
int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff;
int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff;
if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
@@ -2879,9 +2875,8 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
touch = touch && report_touch_events(wacom);
input_mt_slot(input, slot);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
- if (touch) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) {
int x = (data[2] << 4) | (data[4] >> 4);
int y = (data[3] << 4) | (data[4] & 0x0f);
int width, height;
@@ -343,8 +343,7 @@ static void elantech_set_slot(struct input_dev *dev, int slot, bool active,
unsigned int x, unsigned int y)
{
input_mt_slot(dev, slot);
- input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
- if (active) {
+ if (input_mt_report_slot_state(dev, MT_TOOL_FINGER, active)) {
input_report_abs(dev, ABS_MT_POSITION_X, x);
input_report_abs(dev, ABS_MT_POSITION_Y, y);
}
@@ -608,7 +607,7 @@ static void process_packet_status_v4(struct psmouse *psmouse)
for (i = 0; i < ETP_MAX_FINGERS; i++) {
if ((fingers & (1 << i)) == 0) {
input_mt_slot(dev, i);
- input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
+ input_mt_report_slot_inactive(dev);
}
}
@@ -124,8 +124,7 @@ static void focaltech_report_state(struct psmouse *psmouse)
bool active = finger->active && finger->valid;
input_mt_slot(dev, i);
- input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
- if (active) {
+ if (input_mt_report_slot_state(dev, MT_TOOL_FINGER, active)) {
unsigned int clamped_x, clamped_y;
/*
* The touchpad might report invalid data, so we clamp
@@ -683,8 +683,7 @@ static void fsp_set_slot(struct input_dev *dev, int slot, bool active,
unsigned int x, unsigned int y)
{
input_mt_slot(dev, slot);
- input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
- if (active) {
+ if (input_mt_report_slot_state(dev, MT_TOOL_FINGER, active)) {
input_report_abs(dev, ABS_MT_POSITION_X, x);
input_report_abs(dev, ABS_MT_POSITION_Y, y);
}
@@ -882,8 +882,7 @@ static void synaptics_report_semi_mt_slot(struct input_dev *dev, int slot,
bool active, int x, int y)
{
input_mt_slot(dev, slot);
- input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
- if (active) {
+ if (input_mt_report_slot_state(dev, MT_TOOL_FINGER, active)) {
input_report_abs(dev, ABS_MT_POSITION_X, x);
input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(y));
}
@@ -76,10 +76,8 @@ void rmi_2d_sensor_abs_report(struct rmi_2d_sensor *sensor,
else
input_mt_slot(input, slot);
- input_mt_report_slot_state(input, obj->mt_tool,
- obj->type != RMI_2D_OBJECT_NONE);
-
- if (obj->type != RMI_2D_OBJECT_NONE) {
+ if (input_mt_report_slot_state(input, obj->mt_tool,
+ obj->type != RMI_2D_OBJECT_NONE)) {
obj->x = sensor->tracking_pos[slot].x;
obj->y = sensor->tracking_pos[slot].y;
@@ -344,8 +344,8 @@ static irqreturn_t icn8505_irq(int irq, void *dev_id)
bool act = icn8505_touch_active(touch->event);
input_mt_slot(icn8505->input, touch->slot);
- input_mt_report_slot_state(icn8505->input, MT_TOOL_FINGER, act);
- if (!act)
+ if (!input_mt_report_slot_state(icn8505->input,
+ MT_TOOL_FINGER, act))
continue;
touchscreen_report_pos(icn8505->input, &icn8505->prop,
@@ -99,12 +99,11 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
}
input_mt_slot(input_dev, id);
- input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down);
dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d",
down ? "down" : "up", id, x, y, z);
- if (down) {
+ if (input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down)) {
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
input_report_abs(input_dev, ABS_MT_PRESSURE, z);
@@ -693,10 +693,9 @@ static void hideep_report_slot(struct input_dev *input,
const struct hideep_event *event)
{
input_mt_slot(input, event->index & 0x0f);
- input_mt_report_slot_state(input,
- __GET_MT_TOOL_TYPE(event->type),
- !(event->flag & HIDEEP_MT_RELEASED));
- if (!(event->flag & HIDEEP_MT_RELEASED)) {
+ if (input_mt_report_slot_state(input,
+ __GET_MT_TOOL_TYPE(event->type),
+ !(event->flag & HIDEEP_MT_RELEASED))) {
input_report_abs(input, ABS_MT_POSITION_X,
le16_to_cpup(&event->x));
input_report_abs(input, ABS_MT_POSITION_Y,
@@ -154,8 +154,7 @@ static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata)
}
input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
- if (!touch)
+ if (!input_mt_report_slot_state(input, MT_TOOL_FINGER, touch))
continue;
touchscreen_report_pos(input, &priv->prop, x, y,
true);
@@ -178,9 +178,9 @@ static void mms114_process_mt(struct mms114_data *data, struct mms114_touch *tou
x, y, touch->width, touch->strength);
input_mt_slot(input_dev, id);
- input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed);
- if (touch->pressed) {
+ if (input_mt_report_slot_state(input_dev,
+ MT_TOOL_FINGER, touch->pressed)) {
touchscreen_report_pos(input_dev, &data->props, x, y, true);
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width);
input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength);
@@ -69,9 +69,8 @@ static void pm_mtevent(struct pm *pm, struct input_dev *input)
for (i = 0; i < pm->maxcontacts; ++i) {
input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER,
- pm->slots[i].active);
- if (pm->slots[i].active) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER,
+ pm->slots[i].active)) {
input_event(input, EV_ABS, ABS_MT_POSITION_X, pm->slots[i].x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, pm->slots[i].y);
}
@@ -801,9 +801,9 @@ static void raydium_mt_event(struct raydium_data *ts)
u8 wx, wy;
input_mt_slot(ts->input, i);
- input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, state);
- if (!state)
+ if (!input_mt_report_slot_state(ts->input,
+ MT_TOOL_FINGER, state))
continue;
input_report_abs(ts->input, ABS_MT_POSITION_X,
@@ -189,10 +189,9 @@ static int sis_ts_report_contact(struct sis_ts_data *ts, const u8 *data, u8 id)
return -ENOENT;
input_mt_slot(input, slot);
- input_mt_report_slot_state(input, MT_TOOL_FINGER,
- status == SIS_STATUS_DOWN);
- if (status == SIS_STATUS_DOWN) {
+ if (input_mt_report_slot_state(input, MT_TOOL_FINGER,
+ status == SIS_STATUS_DOWN)) {
pressure = height = width = 1;
if (id != SIS_ALL_IN_ONE_PACKAGE) {
if (SIS_PKT_HAS_AREA(id)) {
@@ -75,8 +75,8 @@ static void surface3_spi_report_touch(struct surface3_ts_data *ts_data,
return;
input_mt_slot(ts_data->input_dev, slot);
- input_mt_report_slot_state(ts_data->input_dev, MT_TOOL_FINGER, st);
- if (st) {
+ if (input_mt_report_slot_state(ts_data->input_dev,
+ MT_TOOL_FINGER, st)) {
input_report_abs(ts_data->input_dev,
ABS_MT_POSITION_X,
get_unaligned_le16(&finger->x));
@@ -155,8 +155,7 @@ static void parse_multi_touch(struct w8001 *w8001)
bool touch = data[0] & (1 << i);
input_mt_slot(dev, i);
- input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
- if (touch) {
+ if (input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch)) {
x = (data[6 * i + 1] << 7) | data[6 * i + 2];
y = (data[6 * i + 3] << 7) | data[6 * i + 4];
/* data[5,6] and [11,12] is finger capacity */
@@ -386,10 +386,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
/* the zforce id starts with "1", so needs to be decreased */
input_mt_slot(ts->input, point.id - 1);
- input_mt_report_slot_state(ts->input, MT_TOOL_FINGER,
- point.state != STATE_UP);
-
- if (point.state != STATE_UP) {
+ if (input_mt_report_slot_state(ts->input, MT_TOOL_FINGER,
+ point.state != STATE_UP)) {
input_report_abs(ts->input, ABS_MT_POSITION_X,
point.coord_x);
input_report_abs(ts->input, ABS_MT_POSITION_Y,
Currently several places are calling input_mt_report_slot_state() like following: input_mt_report_slot_state(dev, tool_type, active) if (active) { ... < report events for active slot > } when 'active' is false, input_mt_report_slot_state() will always return false, so instead of checking 'active', switch to use return value of input_mt_report_slot_state() Signed-off-by: Jiada Wang <jiada_wang@mentor.com> --- drivers/hid/hid-asus.c | 3 +-- drivers/hid/hid-elan.c | 3 +-- drivers/hid/hid-logitech-hidpp.c | 5 ++--- drivers/hid/hid-magicmouse.c | 3 +-- drivers/hid/hid-multitouch.c | 3 +-- drivers/hid/hid-sony.c | 8 ++++---- drivers/hid/wacom_wac.c | 15 +++++---------- drivers/input/mouse/elantech.c | 5 ++--- drivers/input/mouse/focaltech.c | 3 +-- drivers/input/mouse/sentelic.c | 3 +-- drivers/input/mouse/synaptics.c | 3 +-- drivers/input/rmi4/rmi_2d_sensor.c | 6 ++---- drivers/input/touchscreen/chipone_icn8505.c | 4 ++-- drivers/input/touchscreen/egalax_ts.c | 3 +-- drivers/input/touchscreen/hideep.c | 7 +++---- drivers/input/touchscreen/ili210x.c | 3 +-- drivers/input/touchscreen/mms114.c | 4 ++-- drivers/input/touchscreen/penmount.c | 5 ++--- drivers/input/touchscreen/raydium_i2c_ts.c | 4 ++-- drivers/input/touchscreen/sis_i2c.c | 5 ++--- drivers/input/touchscreen/surface3_spi.c | 4 ++-- drivers/input/touchscreen/wacom_w8001.c | 3 +-- drivers/input/touchscreen/zforce_ts.c | 6 ++---- 23 files changed, 42 insertions(+), 66 deletions(-)