@@ -15,11 +15,69 @@
#include <linux/input/touchscreen.h>
#include <linux/gpio/consumer.h>
#include <linux/of_device.h>
-#include <linux/platform_data/pixcir_i2c_ts.h>
#include <asm/unaligned.h>
#define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */
+/*
+ * Register map
+ */
+#define PIXCIR_REG_POWER_MODE 51
+#define PIXCIR_REG_INT_MODE 52
+
+/*
+ * Power modes:
+ * active: max scan speed
+ * idle: lower scan speed with automatic transition to active on touch
+ * halt: datasheet says sleep but this is more like halt as the chip
+ * clocks are cut and it can only be brought out of this mode
+ * using the RESET pin.
+ */
+enum pixcir_power_mode {
+ PIXCIR_POWER_ACTIVE,
+ PIXCIR_POWER_IDLE,
+ PIXCIR_POWER_HALT,
+};
+
+#define PIXCIR_POWER_MODE_MASK 0x03
+#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
+
+/*
+ * Interrupt modes:
+ * periodical: interrupt is asserted periodicaly
+ * diff coordinates: interrupt is asserted when coordinates change
+ * level on touch: interrupt level asserted during touch
+ * pulse on touch: interrupt pulse asserted during touch
+ *
+ */
+enum pixcir_int_mode {
+ PIXCIR_INT_PERIODICAL,
+ PIXCIR_INT_DIFF_COORD,
+ PIXCIR_INT_LEVEL_TOUCH,
+ PIXCIR_INT_PULSE_TOUCH,
+};
+
+#define PIXCIR_INT_MODE_MASK 0x03
+#define PIXCIR_INT_ENABLE (1UL << 3)
+#define PIXCIR_INT_POL_HIGH (1UL << 2)
+
+/**
+ * struct pixcir_irc_chip_data - chip related data
+ * @max_fingers: Max number of fingers reported simultaneously by h/w
+ * @has_hw_ids: Hardware supports finger tracking IDs
+ *
+ */
+struct pixcir_i2c_chip_data {
+ u8 max_fingers;
+ bool has_hw_ids;
+};
+
+struct pixcir_ts_platform_data {
+ int x_max;
+ int y_max;
+ struct pixcir_i2c_chip_data chip;
+};
+
struct pixcir_i2c_ts_data {
struct i2c_client *client;
struct input_dev *input;
deleted file mode 100644
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _PIXCIR_I2C_TS_H
-#define _PIXCIR_I2C_TS_H
-
-/*
- * Register map
- */
-#define PIXCIR_REG_POWER_MODE 51
-#define PIXCIR_REG_INT_MODE 52
-
-/*
- * Power modes:
- * active: max scan speed
- * idle: lower scan speed with automatic transition to active on touch
- * halt: datasheet says sleep but this is more like halt as the chip
- * clocks are cut and it can only be brought out of this mode
- * using the RESET pin.
- */
-enum pixcir_power_mode {
- PIXCIR_POWER_ACTIVE,
- PIXCIR_POWER_IDLE,
- PIXCIR_POWER_HALT,
-};
-
-#define PIXCIR_POWER_MODE_MASK 0x03
-#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
-
-/*
- * Interrupt modes:
- * periodical: interrupt is asserted periodicaly
- * diff coordinates: interrupt is asserted when coordinates change
- * level on touch: interrupt level asserted during touch
- * pulse on touch: interrupt pulse asserted druing touch
- *
- */
-enum pixcir_int_mode {
- PIXCIR_INT_PERIODICAL,
- PIXCIR_INT_DIFF_COORD,
- PIXCIR_INT_LEVEL_TOUCH,
- PIXCIR_INT_PULSE_TOUCH,
-};
-
-#define PIXCIR_INT_MODE_MASK 0x03
-#define PIXCIR_INT_ENABLE (1UL << 3)
-#define PIXCIR_INT_POL_HIGH (1UL << 2)
-
-/**
- * struct pixcir_irc_chip_data - chip related data
- * @max_fingers: Max number of fingers reported simultaneously by h/w
- * @has_hw_ids: Hardware supports finger tracking IDs
- *
- */
-struct pixcir_i2c_chip_data {
- u8 max_fingers;
- bool has_hw_ids;
-};
-
-struct pixcir_ts_platform_data {
- int x_max;
- int y_max;
- struct pixcir_i2c_chip_data chip;
-};
-
-#endif
All the defined symbols from linux/platform_data/pixcir_i2c_ts.h are only used by the pixcir_i2c_ts driver, so move all the definitions locally and get rid of the pixcir_i2c_ts.h file. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- drivers/input/touchscreen/pixcir_i2c_ts.c | 60 ++++++++++++++++++- include/linux/platform_data/pixcir_i2c_ts.h | 64 --------------------- 2 files changed, 59 insertions(+), 65 deletions(-) delete mode 100644 include/linux/platform_data/pixcir_i2c_ts.h