@@ -285,11 +285,12 @@ void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode)
EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);
/*
- * Handle a pen down interrupt.
+ * Codec PENDOWN irq handler
+ *
*/
-static void wm97xx_pen_irq_worker(struct work_struct *work)
+static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
{
- struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work);
+ struct wm97xx *wm = dev_id;
int pen_was_down = wm->pen_is_down;
/* do we need to enable the touch panel reader */
@@ -343,27 +344,6 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
if (!wm->pen_is_down && wm->mach_ops->acc_enabled)
wm->mach_ops->acc_pen_up(wm);
- wm->mach_ops->irq_enable(wm, 1);
-}
-
-/*
- * Codec PENDOWN irq handler
- *
- * We have to disable the codec interrupt in the handler because it
- * can take up to 1ms to clear the interrupt source. We schedule a task
- * in a work queue to do the actual interaction with the chip. The
- * interrupt is then enabled again in the slow handler when the source
- * has been cleared.
- */
-static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
-{
- struct wm97xx *wm = dev_id;
-
- if (!work_pending(&wm->pen_event_work)) {
- wm->mach_ops->irq_enable(wm, 0);
- queue_work(wm->ts_workq, &wm->pen_event_work);
- }
-
return IRQ_HANDLED;
}
@@ -374,12 +354,9 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm)
{
u16 reg;
- /* If an interrupt is supplied an IRQ enable operation must also be
- * provided. */
- BUG_ON(!wm->mach_ops->irq_enable);
-
- if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
- "wm97xx-pen", wm)) {
+ if (request_threaded_irq(wm->pen_irq, NULL, wm97xx_pen_interrupt,
+ IRQF_SHARED | IRQF_ONESHOT,
+ "wm97xx-pen", wm)) {
dev_err(wm->dev,
"Failed to register pen down interrupt, polling");
wm->pen_irq = 0;
@@ -509,7 +486,6 @@ static int wm97xx_ts_input_open(struct input_dev *idev)
wm->codec->dig_enable(wm, 1);
INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader);
- INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker);
wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1;
if (wm->ts_reader_min_interval < 1)
@@ -560,10 +536,6 @@ static void wm97xx_ts_input_close(struct input_dev *idev)
wm->pen_is_down = 0;
- /* Balance out interrupt disables/enables */
- if (cancel_work_sync(&wm->pen_event_work))
- wm->mach_ops->irq_enable(wm, 1);
-
/* ts_reader rearms itself so we need to explicitly stop it
* before we destroy the workqueue.
*/
@@ -281,7 +281,6 @@ struct wm97xx {
unsigned long ts_reader_min_interval; /* Minimum interval */
unsigned int pen_irq; /* Pen IRQ number in use */
struct workqueue_struct *ts_workq;
- struct work_struct pen_event_work;
u16 acc_slot; /* AC97 slot used for acc touch data */
u16 acc_rate; /* acc touch data rate */
unsigned pen_is_down:1; /* Pen is down */
Instead of manually disabling and enabling interrupts and scheduling work to access the device, let's use threaded oneshot interrupt handler. It simplifies things. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/input/touchscreen/wm97xx-core.c | 42 +++++-------------------- include/linux/wm97xx.h | 1 - 2 files changed, 7 insertions(+), 36 deletions(-)