| Message ID | 20200207105135.25074-1-benjamin.gaignard@st.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] dt-bindings: mfd: Convert stpmic1 bindings to json-schema | expand |
On Fri, Feb 07, 2020 at 11:51:35AM +0100, Benjamin Gaignard wrote: > Convert stpmic1 bindings to json-schema. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> > --- > version 2: > - document -supply properties > - add $ref in nodes > - move patternProperties under 'regulators' node > .../devicetree/bindings/input/st,stpmic1-onkey.txt | 28 --- > .../devicetree/bindings/mfd/st,stpmic1.txt | 61 ------ > .../devicetree/bindings/mfd/st,stpmic1.yaml | 214 +++++++++++++++++++++ > .../bindings/regulator/st,stpmic1-regulator.txt | 64 ------ > .../bindings/watchdog/st,stpmic1-wdt.txt | 11 -- > 5 files changed, 214 insertions(+), 164 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt > delete mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt > create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > delete mode 100644 Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt > delete mode 100644 Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt > > diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt > deleted file mode 100644 > index eb8e83736c02..000000000000 > --- a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt > +++ /dev/null > @@ -1,28 +0,0 @@ > -STMicroelectronics STPMIC1 Onkey > - > -Required properties: > - > -- compatible = "st,stpmic1-onkey"; > -- interrupts: interrupt line to use > -- interrupt-names = "onkey-falling", "onkey-rising" > - onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic > - onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic > - > -Optional properties: > - > -- st,onkey-clear-cc-flag: onkey is able power on after an > - over-current shutdown event. > -- st,onkey-pu-inactive: onkey pull up is not active > -- power-off-time-sec: Duration in seconds which the key should be kept > - pressed for device to power off automatically (from 1 to 16 seconds). > - see See Documentation/devicetree/bindings/input/input.yaml > - > -Example: > - > -onkey { > - compatible = "st,stpmic1-onkey"; > - interrupt-parent = <&pmic>; > - interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; > - interrupt-names = "onkey-falling", "onkey-rising"; > - power-off-time-sec = <10>; > -}; > diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt > deleted file mode 100644 > index afd45c089585..000000000000 > --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt > +++ /dev/null > @@ -1,61 +0,0 @@ > -* STMicroelectronics STPMIC1 Power Management IC > - > -Required properties: > -- compatible: : "st,stpmic1" > -- reg: : The I2C slave address for the STPMIC1 chip. > -- interrupts: : The interrupt line the device is connected to. > -- #interrupt-cells: : Should be 1. > -- interrupt-controller: : Marks the device node as an interrupt controller. > - Interrupt numbers are defined at > - dt-bindings/mfd/st,stpmic1.h. > - > -STPMIC1 consists in a varied group of sub-devices. > -Each sub-device binding is be described in own documentation file. > - > -Device Description > ------- ------------ > -st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt > -st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt > -st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt > - > -Example: > - > -#include <dt-bindings/mfd/st,stpmic1.h> > - > -pmic: pmic@33 { > - compatible = "st,stpmic1"; > - reg = <0x33>; > - interrupt-parent = <&gpioa>; > - interrupts = <0 2>; > - > - interrupt-controller; > - #interrupt-cells = <2>; > - > - onkey { > - compatible = "st,stpmic1-onkey"; > - interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; > - interrupt-names = "onkey-falling", "onkey-rising"; > - power-off-time-sec = <10>; > - }; > - > - watchdog { > - compatible = "st,stpmic1-wdt"; > - }; > - > - regulators { > - compatible = "st,stpmic1-regulators"; > - > - vdd_core: buck1 { > - regulator-name = "vdd_core"; > - regulator-boot-on; > - regulator-min-microvolt = <700000>; > - regulator-max-microvolt = <1200000>; > - }; > - vdd: buck3 { > - regulator-name = "vdd"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-boot-on; > - regulator-pull-down; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > new file mode 100644 > index 000000000000..2d1c70512c42 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > @@ -0,0 +1,214 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: STMicroelectonics STPMIC1 Power Management IC bindings > + > +description: STMicroelectronics STPMIC1 Power Management IC > + > +maintainers: > + - pascal Paillet <p.paillet@st.com> > + > +properties: > + compatible: > + const: st,stpmic1 > + > + reg: > + const: 0x33 > + > + interrupts: > + maxItems: 1 > + > + "#interrupt-cells": > + const: 2 > + > + interrupt-controller: true > + > + onkey: > + type: object > + > + $ref: ../input/input.yaml Has to be under an 'allOf' or everything else here is ignored. > + > + properties: > + compatible: > + const: st,stpmic1-onkey > + > + interrupts: > + items: > + - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic > + - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic > + > + interrupt-names: > + items: > + - const: onkey-falling > + - const: onkey-rising > + > + st,onkey-clear-cc-flag: > + description: onkey is able power on after an over-current shutdown event. > + $ref: /schemas/types.yaml#/definitions/flag > + > + st,onkey-pu-inactive: > + description: onkey pull up is not active > + $ref: /schemas/types.yaml#/definitions/flag > + > + power-off-time-sec: > + minimum: 1 > + maximum: 16 > + > + required: > + - compatible > + - interrupts > + - interrupt-names > + > + watchdog: > + type: object > + > + $ref: ../watchdog/watchdog.yaml Same here. > + > + properties: > + compatible: > + const: st,stpmic1-wdt > + > + required: > + - compatible > + > + regulators: > + type: object > + > + description: | > + Available Regulators in STPMIC1 device are: > + - buck1 for Buck BUCK1 > + - buck2 for Buck BUCK2 > + - buck3 for Buck BUCK3 > + - buck4 for Buck BUCK4 > + - ldo1 for LDO LDO1 > + - ldo2 for LDO LDO2 > + - ldo3 for LDO LDO3 > + - ldo4 for LDO LDO4 > + - ldo5 for LDO LDO5 > + - ldo6 for LDO LDO6 > + - vref_ddr for LDO Vref DDR > + - boost for Buck BOOST > + - pwr_sw1 for VBUS_OTG switch > + - pwr_sw2 for SW_OUT switch > + Switches are fixed voltage regulators with only enable/disable capability. > + > + properties: > + compatible: > + const: st,stpmic1-regulators > + > + patternProperties: > + "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": > + description: STPMIC1 voltage regulators supplies > + > + "^(buck[1-4]|ldo[1-6]|vref_ddr|boost)$": > + type: object > + > + $ref: ../regulator/regulator.yaml > + > + properties: > + st,mask-reset: > + description: mask reset for this regulator, > + the regulator configuration is maintained during pmic reset. > + $ref: /schemas/types.yaml#/definitions/flag > + > + interrupts: > + maxItems: 1 > + > + regulator-over-current-protection: true > + > + "^(pwr_sw[1-2])$": > + type: object > + > + $ref: ../regulator/regulator.yaml > + > + properties: > + interrupts: > + maxItems: 1 > + > + regulator-over-current-protection: true > + regulator-active-discharge: true No regulator properties are required? > + > + required: > + - compatible > + > + additionalProperties: false > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - "#interrupt-cells" > + - interrupt-controller > + > +examples: > + - | > + #include <dt-bindings/mfd/st,stpmic1.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + pmic@33 { > + compatible = "st,stpmic1"; > + reg = <0x33>; > + interrupt-parent = <&gpioa>; > + interrupts = <0 2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + > + onkey { > + compatible = "st,stpmic1-onkey"; > + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; > + interrupt-names = "onkey-falling", "onkey-rising"; > + power-off-time-sec = <10>; > + }; > + > + watchdog { > + compatible = "st,stpmic1-wdt"; > + }; > + > + regulators { > + compatible = "st,stpmic1-regulators"; > + > + ldo6-supply = <&v3v3>; > + > + buck1 { > + regulator-name = "vdd_core"; > + interrupts = <IT_CURLIM_BUCK1 0>; > + st,mask-reset; > + regulator-boot-on; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + buck3 { > + regulator-name = "vdd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-pull-down; > + }; > + > + buck4 { > + regulator-name = "v3v3"; > + interrupts = <IT_CURLIM_BUCK4 0>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo6 { > + regulator-name = "v1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-over-current-protection; > + }; > + }; > + }; > + }; > + > +... > diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt > deleted file mode 100644 > index 6189df71ea98..000000000000 > --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt > +++ /dev/null > @@ -1,64 +0,0 @@ > -STMicroelectronics STPMIC1 Voltage regulators > - > -Regulator Nodes are optional depending on needs. > - > -Available Regulators in STPMIC1 device are: > - - buck1 for Buck BUCK1 > - - buck2 for Buck BUCK2 > - - buck3 for Buck BUCK3 > - - buck4 for Buck BUCK4 > - - ldo1 for LDO LDO1 > - - ldo2 for LDO LDO2 > - - ldo3 for LDO LDO3 > - - ldo4 for LDO LDO4 > - - ldo5 for LDO LDO5 > - - ldo6 for LDO LDO6 > - - vref_ddr for LDO Vref DDR > - - boost for Buck BOOST > - - pwr_sw1 for VBUS_OTG switch > - - pwr_sw2 for SW_OUT switch > - > -Switches are fixed voltage regulators with only enable/disable capability. > - > -Optional properties: > -- st,mask-reset: mask reset for this regulator: the regulator configuration > - is maintained during pmic reset. > -- regulator-over-current-protection: > - if set, all regulators are switched off in case of over-current detection > - on this regulator, > - if not set, the driver only sends an over-current event. > -- interrupts: index of current limit detection interrupt > -- <regulator>-supply: phandle to the parent supply/regulator node > - each regulator supply can be described except vref_ddr. > -- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2. > - > -Example: > -regulators { > - compatible = "st,stpmic1-regulators"; > - > - ldo6-supply = <&v3v3>; > - > - vdd_core: buck1 { > - regulator-name = "vdd_core"; > - interrupts = <IT_CURLIM_BUCK1 0>; > - st,mask-reset; > - regulator-pull-down; > - regulator-min-microvolt = <700000>; > - regulator-max-microvolt = <1200000>; > - }; > - > - v3v3: buck4 { > - regulator-name = "v3v3"; > - interrupts = <IT_CURLIM_BUCK4 0>; > - > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - v1v8: ldo6 { > - regulator-name = "v1v8"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-over-current-protection; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt > deleted file mode 100644 > index 7cc1407f15cb..000000000000 > --- a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt > +++ /dev/null > @@ -1,11 +0,0 @@ > -STMicroelectronics STPMIC1 Watchdog > - > -Required properties: > - > -- compatible : should be "st,stpmic1-wdt" > - > -Example: > - > -watchdog { > - compatible = "st,stpmic1-wdt"; > -}; > -- > 2.15.0 >
diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt deleted file mode 100644 index eb8e83736c02..000000000000 --- a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectronics STPMIC1 Onkey - -Required properties: - -- compatible = "st,stpmic1-onkey"; -- interrupts: interrupt line to use -- interrupt-names = "onkey-falling", "onkey-rising" - onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic - onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic - -Optional properties: - -- st,onkey-clear-cc-flag: onkey is able power on after an - over-current shutdown event. -- st,onkey-pu-inactive: onkey pull up is not active -- power-off-time-sec: Duration in seconds which the key should be kept - pressed for device to power off automatically (from 1 to 16 seconds). - see See Documentation/devicetree/bindings/input/input.yaml - -Example: - -onkey { - compatible = "st,stpmic1-onkey"; - interrupt-parent = <&pmic>; - interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; -}; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt deleted file mode 100644 index afd45c089585..000000000000 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt +++ /dev/null @@ -1,61 +0,0 @@ -* STMicroelectronics STPMIC1 Power Management IC - -Required properties: -- compatible: : "st,stpmic1" -- reg: : The I2C slave address for the STPMIC1 chip. -- interrupts: : The interrupt line the device is connected to. -- #interrupt-cells: : Should be 1. -- interrupt-controller: : Marks the device node as an interrupt controller. - Interrupt numbers are defined at - dt-bindings/mfd/st,stpmic1.h. - -STPMIC1 consists in a varied group of sub-devices. -Each sub-device binding is be described in own documentation file. - -Device Description ------- ------------ -st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt -st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt -st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt - -Example: - -#include <dt-bindings/mfd/st,stpmic1.h> - -pmic: pmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupt-parent = <&gpioa>; - interrupts = <0 2>; - - interrupt-controller; - #interrupt-cells = <2>; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - }; - - regulators { - compatible = "st,stpmic1-regulators"; - - vdd_core: buck1 { - regulator-name = "vdd_core"; - regulator-boot-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1200000>; - }; - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-pull-down; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml new file mode 100644 index 000000000000..2d1c70512c42 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -0,0 +1,214 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics STPMIC1 Power Management IC bindings + +description: STMicroelectronics STPMIC1 Power Management IC + +maintainers: + - pascal Paillet <p.paillet@st.com> + +properties: + compatible: + const: st,stpmic1 + + reg: + const: 0x33 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + onkey: + type: object + + $ref: ../input/input.yaml + + properties: + compatible: + const: st,stpmic1-onkey + + interrupts: + items: + - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic + - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic + + interrupt-names: + items: + - const: onkey-falling + - const: onkey-rising + + st,onkey-clear-cc-flag: + description: onkey is able power on after an over-current shutdown event. + $ref: /schemas/types.yaml#/definitions/flag + + st,onkey-pu-inactive: + description: onkey pull up is not active + $ref: /schemas/types.yaml#/definitions/flag + + power-off-time-sec: + minimum: 1 + maximum: 16 + + required: + - compatible + - interrupts + - interrupt-names + + watchdog: + type: object + + $ref: ../watchdog/watchdog.yaml + + properties: + compatible: + const: st,stpmic1-wdt + + required: + - compatible + + regulators: + type: object + + description: | + Available Regulators in STPMIC1 device are: + - buck1 for Buck BUCK1 + - buck2 for Buck BUCK2 + - buck3 for Buck BUCK3 + - buck4 for Buck BUCK4 + - ldo1 for LDO LDO1 + - ldo2 for LDO LDO2 + - ldo3 for LDO LDO3 + - ldo4 for LDO LDO4 + - ldo5 for LDO LDO5 + - ldo6 for LDO LDO6 + - vref_ddr for LDO Vref DDR + - boost for Buck BOOST + - pwr_sw1 for VBUS_OTG switch + - pwr_sw2 for SW_OUT switch + Switches are fixed voltage regulators with only enable/disable capability. + + properties: + compatible: + const: st,stpmic1-regulators + + patternProperties: + "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + description: STPMIC1 voltage regulators supplies + + "^(buck[1-4]|ldo[1-6]|vref_ddr|boost)$": + type: object + + $ref: ../regulator/regulator.yaml + + properties: + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + interrupts: + maxItems: 1 + + regulator-over-current-protection: true + + "^(pwr_sw[1-2])$": + type: object + + $ref: ../regulator/regulator.yaml + + properties: + interrupts: + maxItems: 1 + + regulator-over-current-protection: true + regulator-active-discharge: true + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include <dt-bindings/mfd/st,stpmic1.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo6-supply = <&v3v3>; + + buck1 { + regulator-name = "vdd_core"; + interrupts = <IT_CURLIM_BUCK1 0>; + st,mask-reset; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + + buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + + buck4 { + regulator-name = "v3v3"; + interrupts = <IT_CURLIM_BUCK4 0>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-over-current-protection; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt deleted file mode 100644 index 6189df71ea98..000000000000 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ /dev/null @@ -1,64 +0,0 @@ -STMicroelectronics STPMIC1 Voltage regulators - -Regulator Nodes are optional depending on needs. - -Available Regulators in STPMIC1 device are: - - buck1 for Buck BUCK1 - - buck2 for Buck BUCK2 - - buck3 for Buck BUCK3 - - buck4 for Buck BUCK4 - - ldo1 for LDO LDO1 - - ldo2 for LDO LDO2 - - ldo3 for LDO LDO3 - - ldo4 for LDO LDO4 - - ldo5 for LDO LDO5 - - ldo6 for LDO LDO6 - - vref_ddr for LDO Vref DDR - - boost for Buck BOOST - - pwr_sw1 for VBUS_OTG switch - - pwr_sw2 for SW_OUT switch - -Switches are fixed voltage regulators with only enable/disable capability. - -Optional properties: -- st,mask-reset: mask reset for this regulator: the regulator configuration - is maintained during pmic reset. -- regulator-over-current-protection: - if set, all regulators are switched off in case of over-current detection - on this regulator, - if not set, the driver only sends an over-current event. -- interrupts: index of current limit detection interrupt -- <regulator>-supply: phandle to the parent supply/regulator node - each regulator supply can be described except vref_ddr. -- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2. - -Example: -regulators { - compatible = "st,stpmic1-regulators"; - - ldo6-supply = <&v3v3>; - - vdd_core: buck1 { - regulator-name = "vdd_core"; - interrupts = <IT_CURLIM_BUCK1 0>; - st,mask-reset; - regulator-pull-down; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1200000>; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - interrupts = <IT_CURLIM_BUCK4 0>; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - v1v8: ldo6 { - regulator-name = "v1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-over-current-protection; - }; -}; diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt deleted file mode 100644 index 7cc1407f15cb..000000000000 --- a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt +++ /dev/null @@ -1,11 +0,0 @@ -STMicroelectronics STPMIC1 Watchdog - -Required properties: - -- compatible : should be "st,stpmic1-wdt" - -Example: - -watchdog { - compatible = "st,stpmic1-wdt"; -};
Convert stpmic1 bindings to json-schema. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- version 2: - document -supply properties - add $ref in nodes - move patternProperties under 'regulators' node .../devicetree/bindings/input/st,stpmic1-onkey.txt | 28 --- .../devicetree/bindings/mfd/st,stpmic1.txt | 61 ------ .../devicetree/bindings/mfd/st,stpmic1.yaml | 214 +++++++++++++++++++++ .../bindings/regulator/st,stpmic1-regulator.txt | 64 ------ .../bindings/watchdog/st,stpmic1-wdt.txt | 11 -- 5 files changed, 214 insertions(+), 164 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt delete mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt delete mode 100644 Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt