[v11,31/56] Input: atmel_mxt_ts - rename bl_completion to chg_completion

Commit Message

Wang, Jiada May 8, 2020, 5:56 a.m. UTC

From: Nick Dyer <[e-mail]>

Rename bl_completion to chg_completion

Signed-off-by: Nick Dyer <[e-mail]>
(cherry picked from ndyer/linux/for-upstream commit dda8453bfb44216645ede798918a314d4fca2481)
[gdavis: Resolve forward port conflicts due to applying upstream
	 commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
	 data support").]
Signed-off-by: George G. Davis <[e-mail]>
[jiada: call complete(&data->chg_completion) only when in_bootloader is TRUE
	Add commit description]
Signed-off-by: Jiada Wang <[e-mail]>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

Patch

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 4d2240971387..0d77ae455fde 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -383,9 +383,6 @@  struct mxt_data {
 	u8 T100_reportid_max;
 	u16 T107_address;
 
-	/* for fw update in bootloader */
-	struct completion bl_completion;
-
 	/* for reset handling */
 	struct completion reset_completion;
 
@@ -397,6 +394,9 @@  struct mxt_data {
 
 	enum mxt_suspend_mode suspend_mode;
 
+	/* for power up handling */
+	struct completion chg_completion;
+
 	/* Indicates whether device is in suspend */
 	bool suspended;
 
@@ -614,7 +614,7 @@  static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
 		 * CHG assertion before reading the status byte.
 		 * Once the status byte has been read, the line is deasserted.
 		 */
-		ret = mxt_wait_for_completion(data, &data->bl_completion,
+		ret = mxt_wait_for_completion(data, &data->chg_completion,
 					      MXT_FW_CHG_TIMEOUT);
 		if (ret) {
 			/*
@@ -1415,8 +1415,7 @@  static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 	struct mxt_data *data = dev_id;
 
 	if (data->in_bootloader) {
-		/* bootloader state transition completion */
-		complete(&data->bl_completion);
+		complete(&data->chg_completion);
 		return IRQ_HANDLED;
 	}
 
@@ -2180,9 +2179,9 @@  static void mxt_regulator_enable(struct mxt_data *data)
 	msleep(MXT_CHG_DELAY);
 
 retry_wait:
-	reinit_completion(&data->bl_completion);
+	reinit_completion(&data->chg_completion);
 	data->in_bootloader = true;
-	error = mxt_wait_for_completion(data, &data->bl_completion,
+	error = mxt_wait_for_completion(data, &data->chg_completion,
 					MXT_POWERON_DELAY);
 	if (error == -EINTR)
 		goto retry_wait;
@@ -3342,7 +3341,7 @@  static int mxt_enter_bootloader(struct mxt_data *data)
 		enable_irq(data->irq);
 	}
 
-	reinit_completion(&data->bl_completion);
+	reinit_completion(&data->chg_completion);
 
 	return 0;
 }
@@ -3378,7 +3377,7 @@  static int mxt_load_fw(struct device *dev)
 	}
 
 	/* Wait for flash. */
-	ret = mxt_wait_for_completion(data, &data->bl_completion,
+	ret = mxt_wait_for_completion(data, &data->chg_completion,
 				      MXT_FW_RESET_TIME);
 	if (ret)
 		goto disable_irq;
@@ -3389,7 +3388,7 @@  static int mxt_load_fw(struct device *dev)
 	 * the CHG line after bootloading has finished, so ignore potential
 	 * errors.
 	 */
-	mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
+	mxt_wait_for_completion(data, &data->chg_completion, MXT_FW_RESET_TIME);
 
 	data->in_bootloader = false;
 disable_irq:
@@ -3811,7 +3810,7 @@  static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	data->irq = client->irq;
 	i2c_set_clientdata(client, data);
 
-	init_completion(&data->bl_completion);
+	init_completion(&data->chg_completion);
 	init_completion(&data->reset_completion);
 	init_completion(&data->crc_completion);