diff mbox series

[PATCHv3,3/5] Input: EXC3000: add EXC80H60 and EXC80H84 support

Message ID 20200520153936.46869-4-sebastian.reichel@collabora.com (mailing list archive)
State Superseded
Headers show
Series EXC3000 Updates | expand

Commit Message

Sebastian Reichel May 20, 2020, 3:39 p.m. UTC 
This adds support for EXC80H60 and EXCH84 controllers, which
use a different event type id and have two extra bits for the
resolution (so the maximum is 16K instead of 4K).

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../input/touchscreen/eeti,exc3000.yaml       |  5 +-
 drivers/input/touchscreen/exc3000.c           | 80 +++++++++++++++----
 2 files changed, 70 insertions(+), 15 deletions(-)

Comments

Dmitry Torokhov May 20, 2020, 5:45 p.m. UTC | #1 
Hi Sebastian,

On Wed, May 20, 2020 at 05:39:34PM +0200, Sebastian Reichel wrote:
>  
>  	data->client = client;
> +	data->info = device_get_match_data(&client->dev);
> +	if (!data->info) {
> +		enum eeti_dev_id eeti_dev_id =
> +			i2c_match_id(exc3000_id, client)->driver_data;

I believe i2c devices can be instantiated via sysfs, so I think we
better handle case where we can't find matching id. Also driver_data is
enough to store a pointer, maybe we can have individual structures
instead of using an array and indexing here?

Thanks.
Sebastian Reichel May 20, 2020, 9:20 p.m. UTC | #2 
Hi,

On Wed, May 20, 2020 at 10:45:19AM -0700, Dmitry Torokhov wrote:
> Hi Sebastian,
> 
> On Wed, May 20, 2020 at 05:39:34PM +0200, Sebastian Reichel wrote:
> >  
> >  	data->client = client;
> > +	data->info = device_get_match_data(&client->dev);

The above is for DT (and ACPI, but driver has no ACPI table).

> > +	if (!data->info) {
> > +		enum eeti_dev_id eeti_dev_id =
> > +			i2c_match_id(exc3000_id, client)->driver_data;
> 
> I believe i2c devices can be instantiated via sysfs, so I think we
> better handle case where we can't find matching id. Also driver_data is
> enough to store a pointer, maybe we can have individual structures
> instead of using an array and indexing here?

The above code is only for exactly this usecase (loading via sysfs).
There is zero chance, that we cannot find matching id. The sysfs
based probing works by providing the device address and the name
listed in driver's id_table. I took the above code style from
drivers/i2c/muxes/i2c-mux-ltc4306.c.

We can store the pointer directly in i2c_device_id's driver_data
field, but that requires two type casts (field is ulong instead
of pointer). The array variant feels a bit cleaner to me.

-- Sebastian
Dmitry Torokhov May 21, 2020, 6:12 a.m. UTC | #3 
On Wed, May 20, 2020 at 11:20:03PM +0200, Sebastian Reichel wrote:
> Hi,
> 
> On Wed, May 20, 2020 at 10:45:19AM -0700, Dmitry Torokhov wrote:
> > Hi Sebastian,
> > 
> > On Wed, May 20, 2020 at 05:39:34PM +0200, Sebastian Reichel wrote:
> > >  
> > >  	data->client = client;
> > > +	data->info = device_get_match_data(&client->dev);
> 
> The above is for DT (and ACPI, but driver has no ACPI table).
> 
> > > +	if (!data->info) {
> > > +		enum eeti_dev_id eeti_dev_id =
> > > +			i2c_match_id(exc3000_id, client)->driver_data;
> > 
> > I believe i2c devices can be instantiated via sysfs, so I think we
> > better handle case where we can't find matching id. Also driver_data is
> > enough to store a pointer, maybe we can have individual structures
> > instead of using an array and indexing here?
> 
> The above code is only for exactly this usecase (loading via sysfs).
> There is zero chance, that we cannot find matching id. The sysfs
> based probing works by providing the device address and the name
> listed in driver's id_table. I took the above code style from
> drivers/i2c/muxes/i2c-mux-ltc4306.c.

Ah, OK, so i2c does not provide the "new_id" attribute to extend the
match table.

> 
> We can store the pointer directly in i2c_device_id's driver_data
> field, but that requires two type casts (field is ulong instead
> of pointer). The array variant feels a bit cleaner to me.

OK, fair enough. I'll wait for Rob to ack the yaml conversion and will
apply.

Thanks.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
index 022aa69a5dfe..7e6e23f8fa00 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
@@ -14,7 +14,10 @@  allOf:
 
 properties:
   compatible:
-    const: eeti,exc3000
+    enum:
+      - eeti,exc3000
+      - eeti,exc80h60
+      - eeti,exc80h84
   reg:
     const: 0x2a
   interrupts:
diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
index 555a14305cd4..b497bd2ae41d 100644
--- a/drivers/input/touchscreen/exc3000.c
+++ b/drivers/input/touchscreen/exc3000.c
@@ -16,6 +16,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/sizes.h>
 #include <linux/timer.h>
 #include <asm/unaligned.h>
 
@@ -23,11 +24,43 @@ 
 #define EXC3000_SLOTS_PER_FRAME		5
 #define EXC3000_LEN_FRAME		66
 #define EXC3000_LEN_POINT		10
-#define EXC3000_MT_EVENT		6
+
+#define EXC3000_MT1_EVENT		0x06
+#define EXC3000_MT2_EVENT		0x18
+
 #define EXC3000_TIMEOUT_MS		100
 
+static const struct i2c_device_id exc3000_id[];
+
+struct eeti_dev_info {
+	const char *name;
+	int max_xy;
+};
+
+enum eeti_dev_id {
+	EETI_EXC3000,
+	EETI_EXC80H60,
+	EETI_EXC80H84,
+};
+
+static struct eeti_dev_info exc3000_info[] = {
+	[EETI_EXC3000] = {
+		.name = "EETI EXC3000 Touch Screen",
+		.max_xy = SZ_4K - 1,
+	},
+	[EETI_EXC80H60] = {
+		.name = "EETI EXC80H60 Touch Screen",
+		.max_xy = SZ_16K - 1,
+	},
+	[EETI_EXC80H84] = {
+		.name = "EETI EXC80H84 Touch Screen",
+		.max_xy = SZ_16K - 1,
+	},
+};
+
 struct exc3000_data {
 	struct i2c_client *client;
+	const struct eeti_dev_info *info;
 	struct input_dev *input;
 	struct touchscreen_properties prop;
 	struct timer_list timer;
@@ -58,10 +91,15 @@  static void exc3000_timer(struct timer_list *t)
 	input_sync(data->input);
 }
 
-static int exc3000_read_frame(struct i2c_client *client, u8 *buf)
+static int exc3000_read_frame(struct exc3000_data *data, u8 *buf)
 {
+	struct i2c_client *client = data->client;
+	u8 expected_event = EXC3000_MT1_EVENT;
 	int ret;
 
+	if (data->info->max_xy == SZ_16K - 1)
+		expected_event = EXC3000_MT2_EVENT;
+
 	ret = i2c_master_send(client, "'", 2);
 	if (ret < 0)
 		return ret;
@@ -76,19 +114,21 @@  static int exc3000_read_frame(struct i2c_client *client, u8 *buf)
 	if (ret != EXC3000_LEN_FRAME)
 		return -EIO;
 
-	if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME ||
-			buf[2] != EXC3000_MT_EVENT)
+	if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME)
+		return -EINVAL;
+
+	if (buf[2] != expected_event)
 		return -EINVAL;
 
 	return 0;
 }
 
-static int exc3000_read_data(struct i2c_client *client,
+static int exc3000_read_data(struct exc3000_data *data,
 			     u8 *buf, int *n_slots)
 {
 	int error;
 
-	error = exc3000_read_frame(client, buf);
+	error = exc3000_read_frame(data, buf);
 	if (error)
 		return error;
 
@@ -98,7 +138,7 @@  static int exc3000_read_data(struct i2c_client *client,
 
 	if (*n_slots > EXC3000_SLOTS_PER_FRAME) {
 		/* Read 2nd frame to get the rest of the contacts. */
-		error = exc3000_read_frame(client, buf + EXC3000_LEN_FRAME);
+		error = exc3000_read_frame(data, buf + EXC3000_LEN_FRAME);
 		if (error)
 			return error;
 
@@ -118,7 +158,7 @@  static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
 	int slots, total_slots;
 	int error;
 
-	error = exc3000_read_data(data->client, buf, &total_slots);
+	error = exc3000_read_data(data, buf, &total_slots);
 	if (error) {
 		/* Schedule a timer to release "stuck" contacts */
 		mod_timer(&data->timer,
@@ -149,13 +189,19 @@  static int exc3000_probe(struct i2c_client *client)
 {
 	struct exc3000_data *data;
 	struct input_dev *input;
-	int error;
+	int error, max_xy;
 
 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
 	data->client = client;
+	data->info = device_get_match_data(&client->dev);
+	if (!data->info) {
+		enum eeti_dev_id eeti_dev_id =
+			i2c_match_id(exc3000_id, client)->driver_data;
+		data->info = &exc3000_info[eeti_dev_id];
+	}
 	timer_setup(&data->timer, exc3000_timer, 0);
 
 	input = devm_input_allocate_device(&client->dev);
@@ -164,11 +210,13 @@  static int exc3000_probe(struct i2c_client *client)
 
 	data->input = input;
 
-	input->name = "EETI EXC3000 Touch Screen";
+	input->name = data->info->name;
 	input->id.bustype = BUS_I2C;
 
-	input_set_abs_params(input, ABS_MT_POSITION_X, 0, 4095, 0, 0);
-	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 4095, 0, 0);
+	max_xy = data->info->max_xy;
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0);
+
 	touchscreen_parse_properties(input, true, &data->prop);
 
 	error = input_mt_init_slots(input, EXC3000_NUM_SLOTS,
@@ -190,14 +238,18 @@  static int exc3000_probe(struct i2c_client *client)
 }
 
 static const struct i2c_device_id exc3000_id[] = {
-	{ "exc3000", 0 },
+	{ "exc3000", EETI_EXC3000 },
+	{ "exc80h60", EETI_EXC80H60 },
+	{ "exc80h84", EETI_EXC80H84 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, exc3000_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id exc3000_of_match[] = {
-	{ .compatible = "eeti,exc3000" },
+	{ .compatible = "eeti,exc3000", .data = &exc3000_info[EETI_EXC3000] },
+	{ .compatible = "eeti,exc80h60", .data = &exc3000_info[EETI_EXC80H60] },
+	{ .compatible = "eeti,exc80h84", .data = &exc3000_info[EETI_EXC80H84] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, exc3000_of_match);