diff mbox series

[v3] HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state

Message ID 20200629041648.19113-1-kai.heng.feng@canonical.com (mailing list archive)
State Mainlined
Commit cd6cad553bab964241b4e1e50e33a4df45b23943
Delegated to: Jiri Kosina
Headers show
Series [v3] HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state | expand

Commit Message

Kai-Heng Feng June 29, 2020, 4:16 a.m. UTC 
PCI_DEV_FLAGS_NO_D3 should not be used outside of PCI core.

Instead, we can use pci_save_state() to hint PCI core that the device
should stay at D0 during suspend. By doing so, PCI core will let the
upstream bridges also stays at D0 so the entire hierarchy is in the
correct power state as PCI spec mandates.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v3:
 - Use multi-line comments.
v2:
 - Wording change.

 drivers/hid/intel-ish-hid/ipc/pci-ish.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

Comments

Jiri Kosina July 7, 2020, 10:19 a.m. UTC | #1 
On Mon, 29 Jun 2020, Kai-Heng Feng wrote:

> PCI_DEV_FLAGS_NO_D3 should not be used outside of PCI core.
> 
> Instead, we can use pci_save_state() to hint PCI core that the device
> should stay at D0 during suspend. By doing so, PCI core will let the
> upstream bridges also stays at D0 so the entire hierarchy is in the
> correct power state as PCI spec mandates.
> 
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v3:
>  - Use multi-line comments.
> v2:
>  - Wording change.

Applied, thanks.
diff mbox series

Patch

diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
index f491d8b4e24c..c6d48a8648b7 100644
--- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
+++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
@@ -106,6 +106,11 @@  static inline bool ish_should_enter_d0i3(struct pci_dev *pdev)
 	return !pm_suspend_via_firmware() || pdev->device == CHV_DEVICE_ID;
 }
 
+static inline bool ish_should_leave_d0i3(struct pci_dev *pdev)
+{
+	return !pm_resume_via_firmware() || pdev->device == CHV_DEVICE_ID;
+}
+
 /**
  * ish_probe() - PCI driver probe callback
  * @pdev:	pci device
@@ -215,9 +220,7 @@  static void __maybe_unused ish_resume_handler(struct work_struct *work)
 	struct ishtp_device *dev = pci_get_drvdata(pdev);
 	int ret;
 
-	/* Check the NO_D3 flag to distinguish the resume paths */
-	if (pdev->dev_flags & PCI_DEV_FLAGS_NO_D3) {
-		pdev->dev_flags &= ~PCI_DEV_FLAGS_NO_D3;
+	if (ish_should_leave_d0i3(pdev) && !dev->suspend_flag) {
 		disable_irq_wake(pdev->irq);
 
 		ishtp_send_resume(dev);
@@ -281,8 +284,11 @@  static int __maybe_unused ish_suspend(struct device *device)
 			 */
 			ish_disable_dma(dev);
 		} else {
-			/* Set the NO_D3 flag, the ISH would enter D0i3 */
-			pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
+			/*
+			 * Save state so PCI core will keep the device at D0,
+			 * the ISH would enter D0i3
+			 */
+			pci_save_state(pdev);
 
 			enable_irq_wake(pdev->irq);
 		}