From patchwork Thu Oct 22 15:58:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11851523 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 689DE6A2 for ; Thu, 22 Oct 2020 15:59:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 52A7F24640 for ; Thu, 22 Oct 2020 15:59:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S368950AbgJVP7Z (ORCPT ); Thu, 22 Oct 2020 11:59:25 -0400 Received: from mx2.suse.de ([195.135.220.15]:48822 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S368934AbgJVP7W (ORCPT ); Thu, 22 Oct 2020 11:59:22 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.221.27]) by mx2.suse.de (Postfix) with ESMTP id 52B30AE2C; Thu, 22 Oct 2020 15:59:19 +0000 (UTC) From: Nicolas Saenz Julienne To: u.kleine-koenig@pengutronix.de, linux-kernel@vger.kernel.org, Rob Herring , Nicolas Saenz Julienne Cc: f.fainelli@gmail.com, linux-pwm@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, wahrenst@gmx.net, linux-input@vger.kernel.org, dmitry.torokhov@gmail.com, gregkh@linuxfoundation.org, devel@driverdev.osuosl.org, p.zabel@pengutronix.de, linux-gpio@vger.kernel.org, linus.walleij@linaro.org, linux-clk@vger.kernel.org, sboyd@kernel.org, linux-rpi-kernel@lists.infradead.org Subject: [PATCH v2 09/10] DO NOT MERGE: ARM: dts: Add RPi's official PoE hat support Date: Thu, 22 Oct 2020 17:58:56 +0200 Message-Id: <20201022155858.20867-10-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201022155858.20867-1-nsaenzjulienne@suse.de> References: <20201022155858.20867-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This is an example on how to enable the fan on top of RPi's official PoE hat. Signed-off-by: Nicolas Saenz Julienne --- Changes since v1: - Update patch to use 2 pwm cells arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 54 +++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 09a1182c2936..361db82619a4 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -5,6 +5,7 @@ #include "bcm283x-rpi-usb-peripheral.dtsi" #include +#include / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; @@ -68,6 +69,54 @@ sd_vcc_reg: sd_vcc_reg { enable-active-high; gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 50 150 255>; + #cooling-cells = <2>; + pwms = <&fwpwm RASPBERRYPI_FIRMWARE_PWM_POE 80000>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + trips { + threshold: trip-point@0 { + temperature = <45000>; + hysteresis = <5000>; + type = "active"; + }; + + target: trip-point@1 { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot@0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&threshold>; + cooling-device = <&fan 0 1>; + }; + + map1 { + trip = <&target>; + cooling-device = <&fan 1 2>; + }; + + map2 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 3>; + }; + }; + }; + }; }; &ddc0 { @@ -103,6 +152,11 @@ reset: reset { compatible = "raspberrypi,firmware-reset"; #reset-cells = <1>; }; + + fwpwm: pwm { + compatible = "raspberrypi,firmware-pwm"; + #pwm-cells = <2>; + }; }; &gpio {