@@ -63,6 +63,7 @@
#define IQS5XX_SYS_CFG1 0x058F
#define IQS5XX_X_RES 0x066E
#define IQS5XX_Y_RES 0x0670
+#define IQS5XX_EXP_FILE 0x0677
#define IQS5XX_CHKSM 0x83C0
#define IQS5XX_APP 0x8400
#define IQS5XX_CSTM 0xBE00
@@ -86,22 +87,12 @@
#define IQS5XX_BL_CMD_CRC 0x03
#define IQS5XX_BL_BLK_LEN_MAX 64
#define IQS5XX_BL_ID 0x0200
-#define IQS5XX_BL_STATUS_RESET 0x00
#define IQS5XX_BL_STATUS_AVAIL 0xA5
#define IQS5XX_BL_STATUS_NONE 0xEE
#define IQS5XX_BL_CRC_PASS 0x00
#define IQS5XX_BL_CRC_FAIL 0x01
#define IQS5XX_BL_ATTEMPTS 3
-struct iqs5xx_private {
- struct i2c_client *client;
- struct input_dev *input;
- struct gpio_desc *reset_gpio;
- struct touchscreen_properties prop;
- struct mutex lock;
- u8 bl_status;
-};
-
struct iqs5xx_dev_id_info {
__be16 prod_num;
__be16 proj_num;
@@ -133,6 +124,16 @@ struct iqs5xx_status {
struct iqs5xx_touch_data touch_data[IQS5XX_NUM_CONTACTS];
} __packed;
+struct iqs5xx_private {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct gpio_desc *reset_gpio;
+ struct touchscreen_properties prop;
+ struct mutex lock;
+ struct iqs5xx_dev_id_info dev_id_info;
+ u8 exp_file[2];
+};
+
static int iqs5xx_read_burst(struct i2c_client *client,
u16 reg, void *val, u16 len)
{
@@ -445,7 +446,7 @@ static int iqs5xx_set_state(struct i2c_client *client, u8 state)
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
int error1, error2;
- if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
+ if (!iqs5xx->dev_id_info.bl_status)
return 0;
mutex_lock(&iqs5xx->lock);
@@ -615,6 +616,11 @@ static int iqs5xx_dev_init(struct i2c_client *client)
return -EINVAL;
}
+ error = iqs5xx_read_burst(client, IQS5XX_EXP_FILE,
+ iqs5xx->exp_file, sizeof(iqs5xx->exp_file));
+ if (error)
+ return error;
+
error = iqs5xx_axis_init(client);
if (error)
return error;
@@ -638,7 +644,7 @@ static int iqs5xx_dev_init(struct i2c_client *client)
if (error)
return error;
- iqs5xx->bl_status = dev_id_info->bl_status;
+ iqs5xx->dev_id_info = *dev_id_info;
/*
* The following delay allows ATI to complete before the open and close
@@ -664,7 +670,7 @@ static irqreturn_t iqs5xx_irq(int irq, void *data)
* RDY output during bootloader mode. If the device operates outside of
* bootloader mode, the input device is guaranteed to be allocated.
*/
- if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
+ if (!iqs5xx->dev_id_info.bl_status)
return IRQ_NONE;
error = iqs5xx_read_burst(client, IQS5XX_SYS_INFO0,
@@ -853,7 +859,7 @@ static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
int error, error_bl = 0;
u8 *pmap;
- if (iqs5xx->bl_status == IQS5XX_BL_STATUS_NONE)
+ if (iqs5xx->dev_id_info.bl_status == IQS5XX_BL_STATUS_NONE)
return -EPERM;
pmap = kzalloc(IQS5XX_PMAP_LEN, GFP_KERNEL);
@@ -873,7 +879,7 @@ static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
*/
disable_irq(client->irq);
- iqs5xx->bl_status = IQS5XX_BL_STATUS_RESET;
+ iqs5xx->dev_id_info.bl_status = 0;
error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0);
if (error) {
@@ -906,7 +912,7 @@ static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
error_bl = error;
error = iqs5xx_dev_init(client);
- if (!error && iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
+ if (!error && !iqs5xx->dev_id_info.bl_status)
error = -EINVAL;
enable_irq(client->irq);
@@ -966,10 +972,28 @@ static ssize_t fw_file_store(struct device *dev,
return count;
}
+static ssize_t fw_info_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
+
+ if (!iqs5xx->dev_id_info.bl_status)
+ return -ENODATA;
+
+ return scnprintf(buf, PAGE_SIZE, "%u.%u.%u.%u:%u.%u\n",
+ be16_to_cpu(iqs5xx->dev_id_info.prod_num),
+ be16_to_cpu(iqs5xx->dev_id_info.proj_num),
+ iqs5xx->dev_id_info.major_ver,
+ iqs5xx->dev_id_info.minor_ver,
+ iqs5xx->exp_file[0], iqs5xx->exp_file[1]);
+}
+
static DEVICE_ATTR_WO(fw_file);
+static DEVICE_ATTR_RO(fw_info);
static struct attribute *iqs5xx_attrs[] = {
&dev_attr_fw_file.attr,
+ &dev_attr_fw_info.attr,
NULL,
};
Add the read-only 'fw_info' attribute which reports information about the device's firmware in the following format: a.b.c.d:e.f Where: a = Product number (e.g. 40 for IQS550) b = Project number (e.g. 15) c = Firmware revision (major) d = Firmware revision (minor) e = Customer-assigned exported file version (major) f = Customer-assigned exported file version (minor) As part of the corresponding rework to uses of 'bl_status', the IQS5XX_BL_STATUS_RESET definition is dropped with 0 used in its place instead. Signed-off-by: Jeff LaBundy <jeff@labundy.com> --- drivers/input/touchscreen/iqs5xx.c | 56 +++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 16 deletions(-)