[RESEND,v7,1/2] dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings

Commit Message

Joe Hung (洪銘陽) April 6, 2021, 3:56 a.m. UTC

Add binding documentation for ILITEK touch devices.

Signed-off-by: Joe Hung <[e-mail]>
Reviewed-by: Rob Herring <[e-mail]>
---
Changes in v7:
  - None

Changes in v6:
  - Add Reviewed-by trailer

Changes in v5:
  - Remove tab in yaml

Changes in v4:
  - Change IRQ flag to level interrupt
  - Add support for common touchscreen-related properties
  - Modify reset gpio to active low
  - Modify irq type to LEVEL_LOW
  - Add compatible for Lego series ICs

Changes in v3:
  - Add include header in examples, and pass the dt binding check

Changes in v2:
  - Convert to DT schema format
  - Using interrupts instead of irq-gpios

 .../input/touchscreen/ilitek_ts_i2c.yaml      | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml

--
2.25.1

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
new file mode 100644
index 000000000000..a190e7baac31
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -0,0 +1,73 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek I2C Touchscreen Controller
+
+maintainers:
+  - Dmitry Torokhov <[e-mail]>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ilitek,ili2130
+      - ilitek,ili2131
+      - ilitek,ili2132
+      - ilitek,ili2316
+      - ilitek,ili2322
+      - ilitek,ili2323
+      - ilitek,ili2326
+      - ilitek,ili2520
+      - ilitek,ili2521
+
+  reg:
+    const: 0x41
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: touchscreen can be used as a wakeup source.
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@41 {
+            compatible = "ilitek,ili2520";
+            reg = <0x41>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+            touchscreen-inverted-y;
+            wakeup-source;
+        };
+    };