@@ -36,7 +36,8 @@
#define RM_CMD_BOOT_CHK 0x33 /* send data check */
#define RM_CMD_BOOT_READ 0x44 /* send wait bl data ready*/
-#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_CMD_READHWID 0x0E /* read hwid */
/* I2C main commands */
#define RM_CMD_QUERY_BANK 0x2B
@@ -155,6 +156,7 @@ static int raydium_i2c_xfer(struct i2c_client *client, u32 addr,
* sent first. Else, skip the header i.e. xfer[0].
*/
int xfer_start_idx = (addr > 0xff) ? 0 : 1;
+
xfer_count -= xfer_start_idx;
ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
@@ -290,6 +292,43 @@ static int raydium_i2c_sw_reset(struct i2c_client *client)
return 0;
}
+static int raydium_i2c_query_ts_bootloader_info(struct raydium_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ static const u8 get_hwid[7] = {RM_BOOT_CMD_READHWID,
+ 0x10, 0xc0, 0x01, 0x00, 0x04, 0x00};
+ u8 rbuf[5] = {0};
+ u32 hw_ver;
+ int error;
+
+ error = raydium_i2c_send(client, RM_CMD_BOOT_WRT,
+ get_hwid, sizeof(get_hwid));
+ if (error) {
+ dev_err(&client->dev, "WRT HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, rbuf, 1);
+ if (error) {
+ dev_err(&client->dev, "Ack HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_read(client, RM_CMD_BOOT_CHK, rbuf, sizeof(rbuf));
+ if (error) {
+ dev_err(&client->dev, "Read HWID command failed: %d (%4ph)\n",
+ error, rbuf + 1);
+ hw_ver = 0xffffffffUL;
+ } else
+ hw_ver = get_unaligned_be32(rbuf + 1);
+
+ ts->info.hw_ver = cpu_to_le32(hw_ver);
+ ts->info.main_ver = 0xff;
+ ts->info.sub_ver = 0xff;
+
+ return error;
+}
+
static int raydium_i2c_query_ts_info(struct raydium_data *ts)
{
struct i2c_client *client = ts->client;
@@ -388,13 +427,10 @@ static int raydium_i2c_initialize(struct raydium_data *ts)
if (error)
ts->boot_mode = RAYDIUM_TS_BLDR;
- if (ts->boot_mode == RAYDIUM_TS_BLDR) {
- ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
- ts->info.main_ver = 0xff;
- ts->info.sub_ver = 0xff;
- } else {
+ if (ts->boot_mode == RAYDIUM_TS_BLDR)
+ raydium_i2c_query_ts_bootloader_info(ts);
+ else
raydium_i2c_query_ts_info(ts);
- }
return error;
}
@@ -1218,7 +1254,7 @@ static SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops,
raydium_i2c_suspend, raydium_i2c_resume);
static const struct i2c_device_id raydium_i2c_id[] = {
- { "raydium_i2c" , 0 },
+ { "raydium_i2c", 0 },
{ "rm32380", 0 },
{ /* sentinel */ }
};
Add support reading device ID when controller is in bootloader mode, which may happen if firmware update has been interrupted. Signed-off-by: simba.hsu <simba.hsu@rad-ic.com> --- drivers/input/touchscreen/raydium_i2c_ts.c | 52 ++++++++++++++++++---- 1 file changed, 44 insertions(+), 8 deletions(-)