@@ -309,18 +309,6 @@ config INPUT_GPIO_VIBRA
To compile this driver as a module, choose M here: the module will be
called gpio-vibra.
-config INPUT_IXP4XX_BEEPER
- tristate "IXP4XX Beeper support"
- depends on ARCH_IXP4XX
- help
- If you say yes here, you can connect a beeper to the
- ixp4xx gpio pins. This is used by the LinkSys NSLU2.
-
- If unsure, say Y.
-
- To compile this driver as a module, choose M here: the
- module will be called ixp4xx-beeper.
-
config INPUT_COBALT_BTNS
tristate "Cobalt button interface"
depends on MIPS_COBALT
@@ -44,7 +44,6 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
-obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
deleted file mode 100644
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Generic IXP4xx beeper driver
- *
- * Copyright (C) 2005 Tower Technologies
- *
- * based on nslu2-io.c
- * Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- */
-
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("ixp4xx beeper driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ixp4xx-beeper");
-
-static DEFINE_SPINLOCK(beep_lock);
-
-static int ixp4xx_timer2_irq;
-
-static void ixp4xx_spkr_control(unsigned int pin, unsigned int count)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&beep_lock, flags);
-
- if (count) {
- gpio_direction_output(pin, 0);
- *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
- } else {
- gpio_direction_output(pin, 1);
- gpio_direction_input(pin);
- *IXP4XX_OSRT2 = 0;
- }
-
- spin_unlock_irqrestore(&beep_lock, flags);
-}
-
-static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
- unsigned int pin = (unsigned int) input_get_drvdata(dev);
- unsigned int count = 0;
-
- if (type != EV_SND)
- return -1;
-
- switch (code) {
- case SND_BELL:
- if (value)
- value = 1000;
- case SND_TONE:
- break;
- default:
- return -1;
- }
-
- if (value > 20 && value < 32767)
- count = (ixp4xx_timer_freq / (value * 4)) - 1;
-
- ixp4xx_spkr_control(pin, count);
-
- return 0;
-}
-
-static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id)
-{
- unsigned int pin = (unsigned int) dev_id;
-
- /* clear interrupt */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-
- /* flip the beeper output */
- gpio_set_value(pin, !gpio_get_value(pin));
-
- return IRQ_HANDLED;
-}
-
-static int ixp4xx_spkr_probe(struct platform_device *dev)
-{
- struct input_dev *input_dev;
- int irq;
- int err;
-
- input_dev = input_allocate_device();
- if (!input_dev)
- return -ENOMEM;
-
- input_set_drvdata(input_dev, (void *) dev->id);
-
- input_dev->name = "ixp4xx beeper";
- input_dev->phys = "ixp4xx/gpio";
- input_dev->id.bustype = BUS_HOST;
- input_dev->id.vendor = 0x001f;
- input_dev->id.product = 0x0001;
- input_dev->id.version = 0x0100;
- input_dev->dev.parent = &dev->dev;
-
- input_dev->evbit[0] = BIT_MASK(EV_SND);
- input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
- input_dev->event = ixp4xx_spkr_event;
-
- irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- err = irq;
- goto err_free_device;
- }
-
- err = gpio_request(dev->id, "ixp4-beeper");
- if (err)
- goto err_free_device;
-
- err = request_irq(irq, &ixp4xx_spkr_interrupt,
- IRQF_NO_SUSPEND, "ixp4xx-beeper",
- (void *) dev->id);
- if (err)
- goto err_free_gpio;
- ixp4xx_timer2_irq = irq;
-
- err = input_register_device(input_dev);
- if (err)
- goto err_free_irq;
-
- platform_set_drvdata(dev, input_dev);
-
- return 0;
-
- err_free_irq:
- free_irq(irq, (void *)dev->id);
- err_free_gpio:
- gpio_free(dev->id);
- err_free_device:
- input_free_device(input_dev);
-
- return err;
-}
-
-static int ixp4xx_spkr_remove(struct platform_device *dev)
-{
- struct input_dev *input_dev = platform_get_drvdata(dev);
- unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
-
- input_unregister_device(input_dev);
-
- /* turn the speaker off */
- disable_irq(ixp4xx_timer2_irq);
- ixp4xx_spkr_control(pin, 0);
-
- free_irq(ixp4xx_timer2_irq, (void *)dev->id);
- gpio_free(dev->id);
-
- return 0;
-}
-
-static void ixp4xx_spkr_shutdown(struct platform_device *dev)
-{
- struct input_dev *input_dev = platform_get_drvdata(dev);
- unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
-
- /* turn off the speaker */
- disable_irq(ixp4xx_timer2_irq);
- ixp4xx_spkr_control(pin, 0);
-}
-
-static struct platform_driver ixp4xx_spkr_platform_driver = {
- .driver = {
- .name = "ixp4xx-beeper",
- },
- .probe = ixp4xx_spkr_probe,
- .remove = ixp4xx_spkr_remove,
- .shutdown = ixp4xx_spkr_shutdown,
-};
-module_platform_driver(ixp4xx_spkr_platform_driver);
-
The NSLU2 has been migrated to devicetree and there we use the gpio-beeper.c driver instead, the boardfile will be deleted for kernel v5.15 so drop this custom and now unneeded driver. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Squash out other patches this patch depended on, test on a clean v5.14-rc1, sorry for the fuzz. --- drivers/input/misc/Kconfig | 12 -- drivers/input/misc/Makefile | 1 - drivers/input/misc/ixp4xx-beeper.c | 183 ----------------------------- 3 files changed, 196 deletions(-) delete mode 100644 drivers/input/misc/ixp4xx-beeper.c