| Message ID | 20210723112337.101495-1-someguy@effective-light.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Jiri Kosina |
| Headers | show |
| Series | [v2] HID: logitech-hidpp: battery: provide CAPACITY property for newer devices | expand |
On Fri, 2021-07-23 at 07:23 -0400, Hamza Mahfooz wrote: > For devices that only support the BATTERY_VOLTAGE (0x1001) feature, > UPower > requires the additional information provided by this patch, to set > them up. > > v2: use ARRAY_SIZE() and set voltages[]'s size to 100 This information should be under the "---" below, so that it gets stripped when the patch is applied by git. I'm sure Jiri can fix that up though. > > Signed-off-by: Hamza Mahfooz <someguy@effective-light.com> > --- > drivers/hid/hid-logitech-hidpp.c | 30 +++++++++++++++++++++++++++++- > 1 file changed, 29 insertions(+), 1 deletion(-) > > diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid- > logitech-hidpp.c > index 61635e629469..6d63804a9a0f 100644 > --- a/drivers/hid/hid-logitech-hidpp.c > +++ b/drivers/hid/hid-logitech-hidpp.c > @@ -1331,6 +1331,31 @@ static int > hidpp20_battery_get_battery_voltage(struct hidpp_device *hidpp, > return 0; > } > > +static int hidpp20_map_battery_capacity(int voltage) > +{ > + static const int voltages[100] = { Looks good to me. Is there a way to make sure that there are actually 100 values being set in the array? > + 4186, 4156, 4143, 4133, 4122, 4113, 4103, 4094, 4086, > 4075, > + 4067, 4059, 4051, 4043, 4035, 4027, 4019, 4011, 4003, > 3997, > + 3989, 3983, 3976, 3969, 3961, 3955, 3949, 3942, 3935, > 3929, > + 3922, 3916, 3909, 3902, 3896, 3890, 3883, 3877, 3870, > 3865, > + 3859, 3853, 3848, 3842, 3837, 3833, 3828, 3824, 3819, > 3815, > + 3811, 3808, 3804, 3800, 3797, 3793, 3790, 3787, 3784, > 3781, > + 3778, 3775, 3772, 3770, 3767, 3764, 3762, 3759, 3757, > 3754, > + 3751, 3748, 3744, 3741, 3737, 3734, 3730, 3726, 3724, > 3720, > + 3717, 3714, 3710, 3706, 3702, 3697, 3693, 3688, 3683, > 3677, > + 3671, 3666, 3662, 3658, 3654, 3646, 3633, 3612, 3579, > 3537 > + }; > + > + int i; > + > + for (i = 0; i < ARRAY_SIZE(voltages); i++) { > + if (voltage >= voltages[i]) > + return ARRAY_SIZE(voltages) - i; > + } > + > + return 0; > +} > + > static int hidpp20_query_battery_voltage_info(struct hidpp_device > *hidpp) > { > u8 feature_type; > @@ -1354,6 +1379,7 @@ static int > hidpp20_query_battery_voltage_info(struct hidpp_device *hidpp) > > hidpp->battery.status = status; > hidpp->battery.voltage = voltage; > + hidpp->battery.capacity = > hidpp20_map_battery_capacity(voltage); > hidpp->battery.level = level; > hidpp->battery.charge_type = charge_type; > hidpp->battery.online = status != > POWER_SUPPLY_STATUS_NOT_CHARGING; > @@ -1378,6 +1404,7 @@ static int hidpp20_battery_voltage_event(struct > hidpp_device *hidpp, > > if (voltage != hidpp->battery.voltage || status != hidpp- > >battery.status) { > hidpp->battery.voltage = voltage; > + hidpp->battery.capacity = > hidpp20_map_battery_capacity(voltage); > hidpp->battery.status = status; > hidpp->battery.level = level; > hidpp->battery.charge_type = charge_type; > @@ -3717,7 +3744,8 @@ static int hidpp_initialize_battery(struct > hidpp_device *hidpp) > num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 3; > > if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE || > - hidpp->capabilities & > HIDPP_CAPABILITY_BATTERY_PERCENTAGE) > + hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_PERCENTAGE > || > + hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE) > battery_props[num_battery_props++] = > POWER_SUPPLY_PROP_CAPACITY; >
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 61635e629469..6d63804a9a0f 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -1331,6 +1331,31 @@ static int hidpp20_battery_get_battery_voltage(struct hidpp_device *hidpp, return 0; } +static int hidpp20_map_battery_capacity(int voltage) +{ + static const int voltages[100] = { + 4186, 4156, 4143, 4133, 4122, 4113, 4103, 4094, 4086, 4075, + 4067, 4059, 4051, 4043, 4035, 4027, 4019, 4011, 4003, 3997, + 3989, 3983, 3976, 3969, 3961, 3955, 3949, 3942, 3935, 3929, + 3922, 3916, 3909, 3902, 3896, 3890, 3883, 3877, 3870, 3865, + 3859, 3853, 3848, 3842, 3837, 3833, 3828, 3824, 3819, 3815, + 3811, 3808, 3804, 3800, 3797, 3793, 3790, 3787, 3784, 3781, + 3778, 3775, 3772, 3770, 3767, 3764, 3762, 3759, 3757, 3754, + 3751, 3748, 3744, 3741, 3737, 3734, 3730, 3726, 3724, 3720, + 3717, 3714, 3710, 3706, 3702, 3697, 3693, 3688, 3683, 3677, + 3671, 3666, 3662, 3658, 3654, 3646, 3633, 3612, 3579, 3537 + }; + + int i; + + for (i = 0; i < ARRAY_SIZE(voltages); i++) { + if (voltage >= voltages[i]) + return ARRAY_SIZE(voltages) - i; + } + + return 0; +} + static int hidpp20_query_battery_voltage_info(struct hidpp_device *hidpp) { u8 feature_type; @@ -1354,6 +1379,7 @@ static int hidpp20_query_battery_voltage_info(struct hidpp_device *hidpp) hidpp->battery.status = status; hidpp->battery.voltage = voltage; + hidpp->battery.capacity = hidpp20_map_battery_capacity(voltage); hidpp->battery.level = level; hidpp->battery.charge_type = charge_type; hidpp->battery.online = status != POWER_SUPPLY_STATUS_NOT_CHARGING; @@ -1378,6 +1404,7 @@ static int hidpp20_battery_voltage_event(struct hidpp_device *hidpp, if (voltage != hidpp->battery.voltage || status != hidpp->battery.status) { hidpp->battery.voltage = voltage; + hidpp->battery.capacity = hidpp20_map_battery_capacity(voltage); hidpp->battery.status = status; hidpp->battery.level = level; hidpp->battery.charge_type = charge_type; @@ -3717,7 +3744,8 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp) num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 3; if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE || - hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_PERCENTAGE) + hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_PERCENTAGE || + hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE) battery_props[num_battery_props++] = POWER_SUPPLY_PROP_CAPACITY;
For devices that only support the BATTERY_VOLTAGE (0x1001) feature, UPower requires the additional information provided by this patch, to set them up. v2: use ARRAY_SIZE() and set voltages[]'s size to 100 Signed-off-by: Hamza Mahfooz <someguy@effective-light.com> --- drivers/hid/hid-logitech-hidpp.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-)