| Message ID | 20211104093429.16096-1-andrzej.p@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC] tty/sysrq: Add alternative SysRq key | expand |
On Thu, Nov 04, 2021 at 10:34:29AM +0100, Andrzej Pietrasiewicz wrote: > There exist machines which don't have SysRq key at all, e.g. chromebooks. > > This patch allows configuring an alternative key to act as SysRq. Devices > which declare KEY_SYSRQ in their 'keybit' bitmap continue using KEY_SYSRQ, > but other devices use the alternative SysRq key instead, by default F10. > Which key is actually used can be modified with sysrq's module parameter. > > Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> > --- > > > A corrected version with completed conflict resolution. > > > > drivers/tty/sysrq.c | 28 +++++++++++++++++++++++++--- > 1 file changed, 25 insertions(+), 3 deletions(-) > > diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c > index c911196ac893..fb59745b23c9 100644 > --- a/drivers/tty/sysrq.c > +++ b/drivers/tty/sysrq.c > @@ -634,6 +634,7 @@ EXPORT_SYMBOL(handle_sysrq); > > #ifdef CONFIG_INPUT > static int sysrq_reset_downtime_ms; > +static unsigned short alternative_sysrq_key = KEY_F10; > > /* Simple translation table for the SysRq keys */ > static const unsigned char sysrq_xlate[KEY_CNT] = > @@ -653,6 +654,7 @@ struct sysrq_state { > unsigned int alt_use; > unsigned int shift; > unsigned int shift_use; > + unsigned short sysrq_key; > bool active; > bool need_reinject; > bool reinjecting; > @@ -802,10 +804,10 @@ static void sysrq_reinject_alt_sysrq(struct work_struct *work) > > /* Simulate press and release of Alt + SysRq */ > input_inject_event(handle, EV_KEY, alt_code, 1); > - input_inject_event(handle, EV_KEY, KEY_SYSRQ, 1); > + input_inject_event(handle, EV_KEY, sysrq->sysrq_key, 1); > input_inject_event(handle, EV_SYN, SYN_REPORT, 1); > > - input_inject_event(handle, EV_KEY, KEY_SYSRQ, 0); > + input_inject_event(handle, EV_KEY, sysrq->sysrq_key, 0); > input_inject_event(handle, EV_KEY, alt_code, 0); > input_inject_event(handle, EV_SYN, SYN_REPORT, 1); > > @@ -845,6 +847,7 @@ static bool sysrq_handle_keypress(struct sysrq_state *sysrq, > sysrq->shift = code; > break; > > +key_sysrq: > case KEY_SYSRQ: > if (value == 1 && sysrq->alt != KEY_RESERVED) { > sysrq->active = true; > @@ -867,11 +870,15 @@ static bool sysrq_handle_keypress(struct sysrq_state *sysrq, > * triggering print screen function. > */ > if (sysrq->active) > - clear_bit(KEY_SYSRQ, sysrq->handle.dev->key); > + clear_bit(sysrq->sysrq_key, sysrq->handle.dev->key); > > break; > > default: > + /* handle non-default sysrq key */ > + if (code == sysrq->sysrq_key) > + goto key_sysrq; > + > if (sysrq->active && value && value != 2) { > unsigned char c = sysrq_xlate[code]; > > @@ -970,6 +977,14 @@ static int sysrq_connect(struct input_handler *handler, > sysrq->handle.private = sysrq; > timer_setup(&sysrq->keyreset_timer, sysrq_do_reset, 0); > > + if (test_bit(KEY_SYSRQ, dev->keybit)) { > + sysrq->sysrq_key = KEY_SYSRQ; > + pr_info("%s: using default sysrq key [%x]\n", dev->name, KEY_SYSRQ); > + } else { > + sysrq->sysrq_key = alternative_sysrq_key; > + pr_info("%s: Using alternative sysrq key: [%x]\n", dev->name, sysrq->sysrq_key); > + } > + > error = input_register_handle(&sysrq->handle); > if (error) { > pr_err("Failed to register input sysrq handler, error %d\n", > @@ -1078,6 +1093,13 @@ module_param_array_named(reset_seq, sysrq_reset_seq, sysrq_reset_seq, > > module_param_named(sysrq_downtime_ms, sysrq_reset_downtime_ms, int, 0644); > > +module_param(alternative_sysrq_key, ushort, 0644); > +MODULE_PARM_DESC(alternative_sysrq_key, > + "Alternative SysRq key for input devices that don't have SysRq key. F10 by default.\n" > + "Example\n" > + "Using F9 as SysRq:\n" > + "sysrq.alternative_sysrq_key=0x43\n"); > + > #else > > static inline void sysrq_register_handler(void) > -- > 2.17.1 > Hi, This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree. You are receiving this message because of the following common error(s) as indicated below: - This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what needs to be done here to properly describe this. If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers. thanks, greg k-h's patch email bot
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index c911196ac893..fb59745b23c9 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -634,6 +634,7 @@ EXPORT_SYMBOL(handle_sysrq); #ifdef CONFIG_INPUT static int sysrq_reset_downtime_ms; +static unsigned short alternative_sysrq_key = KEY_F10; /* Simple translation table for the SysRq keys */ static const unsigned char sysrq_xlate[KEY_CNT] = @@ -653,6 +654,7 @@ struct sysrq_state { unsigned int alt_use; unsigned int shift; unsigned int shift_use; + unsigned short sysrq_key; bool active; bool need_reinject; bool reinjecting; @@ -802,10 +804,10 @@ static void sysrq_reinject_alt_sysrq(struct work_struct *work) /* Simulate press and release of Alt + SysRq */ input_inject_event(handle, EV_KEY, alt_code, 1); - input_inject_event(handle, EV_KEY, KEY_SYSRQ, 1); + input_inject_event(handle, EV_KEY, sysrq->sysrq_key, 1); input_inject_event(handle, EV_SYN, SYN_REPORT, 1); - input_inject_event(handle, EV_KEY, KEY_SYSRQ, 0); + input_inject_event(handle, EV_KEY, sysrq->sysrq_key, 0); input_inject_event(handle, EV_KEY, alt_code, 0); input_inject_event(handle, EV_SYN, SYN_REPORT, 1); @@ -845,6 +847,7 @@ static bool sysrq_handle_keypress(struct sysrq_state *sysrq, sysrq->shift = code; break; +key_sysrq: case KEY_SYSRQ: if (value == 1 && sysrq->alt != KEY_RESERVED) { sysrq->active = true; @@ -867,11 +870,15 @@ static bool sysrq_handle_keypress(struct sysrq_state *sysrq, * triggering print screen function. */ if (sysrq->active) - clear_bit(KEY_SYSRQ, sysrq->handle.dev->key); + clear_bit(sysrq->sysrq_key, sysrq->handle.dev->key); break; default: + /* handle non-default sysrq key */ + if (code == sysrq->sysrq_key) + goto key_sysrq; + if (sysrq->active && value && value != 2) { unsigned char c = sysrq_xlate[code]; @@ -970,6 +977,14 @@ static int sysrq_connect(struct input_handler *handler, sysrq->handle.private = sysrq; timer_setup(&sysrq->keyreset_timer, sysrq_do_reset, 0); + if (test_bit(KEY_SYSRQ, dev->keybit)) { + sysrq->sysrq_key = KEY_SYSRQ; + pr_info("%s: using default sysrq key [%x]\n", dev->name, KEY_SYSRQ); + } else { + sysrq->sysrq_key = alternative_sysrq_key; + pr_info("%s: Using alternative sysrq key: [%x]\n", dev->name, sysrq->sysrq_key); + } + error = input_register_handle(&sysrq->handle); if (error) { pr_err("Failed to register input sysrq handler, error %d\n", @@ -1078,6 +1093,13 @@ module_param_array_named(reset_seq, sysrq_reset_seq, sysrq_reset_seq, module_param_named(sysrq_downtime_ms, sysrq_reset_downtime_ms, int, 0644); +module_param(alternative_sysrq_key, ushort, 0644); +MODULE_PARM_DESC(alternative_sysrq_key, + "Alternative SysRq key for input devices that don't have SysRq key. F10 by default.\n" + "Example\n" + "Using F9 as SysRq:\n" + "sysrq.alternative_sysrq_key=0x43\n"); + #else static inline void sysrq_register_handler(void)
There exist machines which don't have SysRq key at all, e.g. chromebooks. This patch allows configuring an alternative key to act as SysRq. Devices which declare KEY_SYSRQ in their 'keybit' bitmap continue using KEY_SYSRQ, but other devices use the alternative SysRq key instead, by default F10. Which key is actually used can be modified with sysrq's module parameter. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> --- A corrected version with completed conflict resolution. drivers/tty/sysrq.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-)