diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 229d4936910f..f79b5eea1295 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -1095,6 +1095,25 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
 	},
+	/*
+	 * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+	 * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+	 * none of them have an external PS/2 port so this can savely be set for
+	 * all of them. These two are based on a Clevo design, but have the
+	 * board_name changed.
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+			DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+			DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
+		},
+	},
 	{
 		/* Mivvy M310 */
 		.matches = {
@@ -1124,6 +1143,112 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
 	},
+	/*
+	 * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+	 * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+	 * none of them have an external PS/2 port so this can savely be set for
+	 * all of them.
+	 * Clevo barebones come with board_vendor and/or system_vendor set to
+	 * either the very generic string "Notebook" and/or a different value
+	 * for each individual reseller. The only somewhat universal way to
+	 * identify them is by board_name.
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	/*
+	 * At least one modern Clevo barebone has the touchpad connected both
+	 * via PS/2 and i2c interface. This causes a race condition between the
+	 * psmouse and i2c-hid driver. Since the full capability of the touchpad
+	 * is available via the i2c interface and the device has no external
+	 * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+	 * this issue. The know affected device is the
+	 * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+	 * the two different dmi strings below. NS50MU is not a typo!
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+					SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+					SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
 	{ }
 };
 
