diff mbox series

[v6,07/13] i2c: acpi: Use ACPI wake capability bit to set wake_irq

Message ID 20220929093200.v6.7.I8af4282adc72eb9f247adcd03676a43893a020a6@changeid (mailing list archive)
State Under Review
Commit b38f2d5d9615cf991fb68626e70b042cb8b6dc3e
Headers show
Series acpi: i2c: Use SharedAndWake and ExclusiveAndWake to enable wake irq | expand

Commit Message

Raul Rangel Sept. 29, 2022, 4:19 p.m. UTC 
Device tree already has a mechanism to pass the wake_irq. It does this
by looking for the wakeup-source property and setting the
I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
ACPI interrupt wake flag to determine if the interrupt can be used to
wake the system. Previously the i2c drivers had to make assumptions and
blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
If there is a device with an Active Low interrupt and the device gets
powered off while suspending, the interrupt line will go low since it's
no longer powered and wakes the system. For this reason we should
respect the board designers wishes and honor the wake bit defined on the
interrupt.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

---

Changes in v6:
- Return early when irq < 0

Changes in v5:
- Check irq return value before updating wake_capable pointer

Changes in v4:
- Removed unnecessary !!
- Removed unrelated whitespace change
- Added Reviewed-by
- Renamed i2c_acpi_add_resource to i2c_acpi_add_irq_resource
- Expanded logic in i2c_acpi_add_i2c_resource to make it easier to read

Changes in v3:
- Convert wake_capable to bool
- Only update wake_capable pointer once
- Move wake_capable local into local block

Changes in v2:
- Look at wake_cabple bit for IRQ/Interrupt resources

 drivers/i2c/i2c-core-acpi.c | 40 +++++++++++++++++++++++++++----------
 drivers/i2c/i2c-core-base.c |  6 +++++-
 drivers/i2c/i2c-core.h      |  4 ++--
 3 files changed, 37 insertions(+), 13 deletions(-)

Comments

Wolfram Sang Oct. 1, 2022, 10:51 p.m. UTC | #1 
On Thu, Sep 29, 2022 at 10:19:11AM -0600, Raul E Rangel wrote:
> Device tree already has a mechanism to pass the wake_irq. It does this
> by looking for the wakeup-source property and setting the
> I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
> ACPI interrupt wake flag to determine if the interrupt can be used to
> wake the system. Previously the i2c drivers had to make assumptions and
> blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
> If there is a device with an Active Low interrupt and the device gets
> powered off while suspending, the interrupt line will go low since it's
> no longer powered and wakes the system. For this reason we should
> respect the board designers wishes and honor the wake bit defined on the
> interrupt.
> 
> Signed-off-by: Raul E Rangel <rrangel@chromium.org>
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

I assume this goes in with the rest of this series, so:

Acked-by: Wolfram Sang <wsa@kernel.org>
diff mbox series

Patch

diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index c762a879c4cc6b7..10cdf724fd4b2cd 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -137,6 +137,11 @@  static const struct acpi_device_id i2c_acpi_ignored_device_ids[] = {
 	{}
 };
 
+struct i2c_acpi_irq_context {
+	int irq;
+	bool wake_capable;
+};
+
 static int i2c_acpi_do_lookup(struct acpi_device *adev,
 			      struct i2c_acpi_lookup *lookup)
 {
@@ -168,13 +173,19 @@  static int i2c_acpi_do_lookup(struct acpi_device *adev,
 	return 0;
 }
 
-static int i2c_acpi_add_resource(struct acpi_resource *ares, void *data)
+static int i2c_acpi_add_irq_resource(struct acpi_resource *ares, void *data)
 {
-	int *irq = data;
+	struct i2c_acpi_irq_context *irq_ctx = data;
 	struct resource r;
 
-	if (*irq <= 0 && acpi_dev_resource_interrupt(ares, 0, &r))
-		*irq = i2c_dev_irq_from_resources(&r, 1);
+	if (irq_ctx->irq > 0)
+		return 1;
+
+	if (!acpi_dev_resource_interrupt(ares, 0, &r))
+		return 1;
+
+	irq_ctx->irq = i2c_dev_irq_from_resources(&r, 1);
+	irq_ctx->wake_capable = r.flags & IORESOURCE_IRQ_WAKECAPABLE;
 
 	return 1; /* No need to add resource to the list */
 }
@@ -182,31 +193,40 @@  static int i2c_acpi_add_resource(struct acpi_resource *ares, void *data)
 /**
  * i2c_acpi_get_irq - get device IRQ number from ACPI
  * @client: Pointer to the I2C client device
+ * @wake_capable: Set to true if the IRQ is wake capable
  *
  * Find the IRQ number used by a specific client device.
  *
  * Return: The IRQ number or an error code.
  */
-int i2c_acpi_get_irq(struct i2c_client *client)
+int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
 	struct list_head resource_list;
-	int irq = -ENOENT;
+	struct i2c_acpi_irq_context irq_ctx = {
+		.irq = -ENOENT,
+	};
 	int ret;
 
 	INIT_LIST_HEAD(&resource_list);
 
 	ret = acpi_dev_get_resources(adev, &resource_list,
-				     i2c_acpi_add_resource, &irq);
+				     i2c_acpi_add_irq_resource, &irq_ctx);
 	if (ret < 0)
 		return ret;
 
 	acpi_dev_free_resource_list(&resource_list);
 
-	if (irq == -ENOENT)
-		irq = acpi_dev_gpio_irq_get(adev, 0);
+	if (irq_ctx.irq == -ENOENT)
+		irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);
+
+	if (irq_ctx.irq < 0)
+		return irq_ctx.irq;
+
+	if (wake_capable)
+		*wake_capable = irq_ctx.wake_capable;
 
-	return irq;
+	return irq_ctx.irq;
 }
 
 static int i2c_acpi_get_info(struct acpi_device *adev,
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 91007558bcb2601..fc4b85fb90b1b7b 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -487,7 +487,11 @@  static int i2c_device_probe(struct device *dev)
 			if (irq == -EINVAL || irq == -ENODATA)
 				irq = of_irq_get(dev->of_node, 0);
 		} else if (ACPI_COMPANION(dev)) {
-			irq = i2c_acpi_get_irq(client);
+			bool wake_capable;
+
+			irq = i2c_acpi_get_irq(client, &wake_capable);
+			if (irq > 0 && wake_capable)
+				client->flags |= I2C_CLIENT_WAKE;
 		}
 		if (irq == -EPROBE_DEFER) {
 			status = irq;
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 87e2c914f1c57ba..1247e6e6e97517a 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -61,11 +61,11 @@  static inline int __i2c_check_suspended(struct i2c_adapter *adap)
 #ifdef CONFIG_ACPI
 void i2c_acpi_register_devices(struct i2c_adapter *adap);
 
-int i2c_acpi_get_irq(struct i2c_client *client);
+int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable);
 #else /* CONFIG_ACPI */
 static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
 
-static inline int i2c_acpi_get_irq(struct i2c_client *client)
+static inline int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable)
 {
 	return 0;
 }