[v5,1/2] dt-bindings: input: document Qualcomm PMI8998 haptics driver

Commit Message

Caleb Connolly Oct. 10, 2022, 4:18 p.m. UTC

Add bindings for qcom PMIC PMI8998 haptics driver.

Signed-off-by: Caleb Connolly <[e-mail]>
---
 .../bindings/input/qcom,pmi8998-haptics.yaml  | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml

--
2.38.0

Patch

diff --git a/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
new file mode 100644
index 000000000000..cdffe893c77a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
@@ -0,0 +1,72 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,spmi-haptics.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMI8998/PM660 Haptics
+
+maintainers:
+  - Caleb Connolly <[e-mail]>
+
+description: |
+  Qualcomm SPMI haptics is a peripheral on some QTI PMICs. It supports linear resonant
+  actuators and eccentric rotating mass type haptics commonly found in mobile devices.
+  It supports multiple sources of wave data such as an internal buffer, direct play
+  (from kernel or userspace) as well as an audio output mode.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pmi8998-haptics
+          - qcom,pm660-charger
+          - qcom,pmi8996-haptics
+          - qcom,pmi8941-haptics
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: short
+      - const: play
+
+  qcom,wave-play-rate-us:
+    description: |
+      Wave sample durection in microseconds, 1/f where f
+      is the resonant frequency of the actuator.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 20475
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - qcom,wave-play-rate-us
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interrupt-controller/irq.h>
+
+      spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmi8998_haptics: haptics@c000 {
+          compatible = "qcom,pmi8998-haptics";
+          reg = <0xc000>;
+
+          interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
+                      <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
+          interrupt-names = "short", "play";
+
+          qcom,wave-play-rate-us = <4255>;
+        };
+      };