diff mbox series

[v10,4/4] ARM: dts: imx7d-remarkable2: Enable the cyttsp5

Message ID 20221026114908.191472-5-alistair@alistair23.me (mailing list archive)
State New, archived
Headers show
Series Add support for the Cypress cyttsp5 | expand

Commit Message

Alistair Francis Oct. 26, 2022, 11:49 a.m. UTC 
Add support for the cyttsp5 touchscreen controller for the reMarkable 2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 100 ++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

Comments

Shawn Guo Nov. 11, 2022, 2:29 a.m. UTC | #1 
On Wed, Oct 26, 2022 at 09:49:08PM +1000, Alistair Francis wrote:
> Add support for the cyttsp5 touchscreen controller for the reMarkable 2.
> 
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
>  arch/arm/boot/dts/imx7d-remarkable2.dts | 100 ++++++++++++++++++++++++
>  1 file changed, 100 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> index a2a91bfdd98e..fea480af8e48 100644
> --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> @@ -8,6 +8,7 @@
>  /dts-v1/;
>  
>  #include "imx7d.dtsi"
> +#include <dt-bindings/input/linux-event-codes.h>
>  
>  / {
>  	model = "reMarkable 2.0";
> @@ -47,6 +48,18 @@ reg_digitizer: regulator-digitizer {
>  		startup-delay-us = <100000>; /* 100 ms */
>  	};
>  
> +	reg_touch: regulator-touch {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDD_3V3_TOUCH";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		pinctrl-names = "default", "sleep";
> +		pinctrl-0 = <&pinctrl_touch_reg>;
> +		pinctrl-1 = <&pinctrl_touch_reg>;
> +		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>  	wifi_pwrseq: wifi_pwrseq {
>  		compatible = "mmc-pwrseq-simple";
>  		pinctrl-names = "default";
> @@ -84,6 +97,70 @@ wacom_digitizer: digitizer@9 {
>  	};
>  };
>  
> +&i2c3 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	status = "okay";
> +
> +	tsc@24 {

`touchscreen` for node name?

> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +

Unnecessary newline.

> +		compatible = "cypress,tt21000";

We idiomatically begin property list with compatible.

> +		reg = <0x24>;
> +

Unnecessary newline.

Shawn

> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_touch>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> +		vdd-supply = <&reg_touch>;
> +		touchscreen-size-x = <880>;
> +		touchscreen-size-y = <1280>;
> +
> +		button@0 {
> +			reg = <0>;
> +			linux,keycodes = <KEY_HOMEPAGE>;
> +		};
> +
> +		button@1 {
> +			reg = <1>;
> +			linux,keycodes = <KEY_MENU>;
> +		};
> +
> +		button@2 {
> +			reg = <2>;
> +			linux,keycodes = <KEY_BACK>;
> +		};
> +
> +		button@3 {
> +			reg = <3>;
> +			linux,keycodes = <KEY_SEARCH>;
> +		};
> +
> +		button@4 {
> +			reg = <4>;
> +			linux,keycodes = <KEY_VOLUMEDOWN>;
> +		};
> +
> +		button@5 {
> +			reg = <5>;
> +			linux,keycodes = <KEY_VOLUMEUP>;
> +		};
> +
> +		button@6 {
> +			reg = <6>;
> +			linux,keycodes = <KEY_CAMERA>;
> +		};
> +
> +		button@7 {
> +			reg = <7>;
> +			linux,keycodes = <KEY_POWER>;
> +		};
> +	};
> +};
> +
>  &snvs_pwrkey {
>  	status = "okay";
>  };
> @@ -177,6 +254,15 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
>  		>;
>  	};
>  
> +	pinctrl_touch: touchgrp {
> +		fsl,pins = <
> +			/* CYTTSP interrupt */
> +			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
> +			/* CYTTSP reset */
> +			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
> +		>;
> +	};
> +
>  	pinctrl_i2c1: i2c1grp {
>  		fsl,pins = <
>  			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
> @@ -184,6 +270,20 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
>  		>;
>  	};
>  
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
> +			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_touch_reg: touchreggrp {
> +		fsl,pins = <
> +			/* TOUCH_PWR_EN */
> +			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
> +		>;
> +	};
> +
>  	pinctrl_uart1: uart1grp {
>  		fsl,pins = <
>  			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
> -- 
> 2.37.3
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index a2a91bfdd98e..fea480af8e48 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -8,6 +8,7 @@ 
 /dts-v1/;
 
 #include "imx7d.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	model = "reMarkable 2.0";
@@ -47,6 +48,18 @@  reg_digitizer: regulator-digitizer {
 		startup-delay-us = <100000>; /* 100 ms */
 	};
 
+	reg_touch: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_TOUCH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_touch_reg>;
+		pinctrl-1 = <&pinctrl_touch_reg>;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -84,6 +97,70 @@  wacom_digitizer: digitizer@9 {
 	};
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	tsc@24 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_touch>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+
+		button@0 {
+			reg = <0>;
+			linux,keycodes = <KEY_HOMEPAGE>;
+		};
+
+		button@1 {
+			reg = <1>;
+			linux,keycodes = <KEY_MENU>;
+		};
+
+		button@2 {
+			reg = <2>;
+			linux,keycodes = <KEY_BACK>;
+		};
+
+		button@3 {
+			reg = <3>;
+			linux,keycodes = <KEY_SEARCH>;
+		};
+
+		button@4 {
+			reg = <4>;
+			linux,keycodes = <KEY_VOLUMEDOWN>;
+		};
+
+		button@5 {
+			reg = <5>;
+			linux,keycodes = <KEY_VOLUMEUP>;
+		};
+
+		button@6 {
+			reg = <6>;
+			linux,keycodes = <KEY_CAMERA>;
+		};
+
+		button@7 {
+			reg = <7>;
+			linux,keycodes = <KEY_POWER>;
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -177,6 +254,15 @@  MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* CYTTSP interrupt */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
+			/* CYTTSP reset */
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
@@ -184,6 +270,20 @@  MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
 		>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_touch_reg: touchreggrp {
+		fsl,pins = <
+			/* TOUCH_PWR_EN */
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79