@@ -230,6 +230,7 @@ config PPC4xx_GPIO
bool "PPC4xx GPIO support"
depends on 44x
select GPIOLIB
+ select OF_GPIO_MM_GPIOCHIP
help
Enable gpiolib support for ppc440 based boards
@@ -14,7 +14,7 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
#include <linux/gpio/driver.h>
#include <linux/types.h>
#include <linux/slab.h>
@@ -101,6 +101,7 @@ comment "Generic MPC8xx Options"
config 8xx_GPIO
bool "GPIO API Support"
select GPIOLIB
+ select OF_GPIO_MM_GPIOCHIP
help
Saying Y here will cause the ports on an MPC8xx processor to be used
with the GPIO API. If you say N here, the kernel needs less memory.
@@ -44,7 +44,7 @@
#include <asm/fs_pd.h>
#ifdef CONFIG_8xx_GPIO
-#include <linux/of_gpio.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
#endif
#define CPM_MAP_SIZE (0x4000)
@@ -244,6 +244,7 @@ config QE_GPIO
bool "QE GPIO support"
depends on QUICC_ENGINE
select GPIOLIB
+ select OF_GPIO_MM_GPIOCHIP
help
Say Y here if you're going to use hardware that connects to the
QE GPIOs.
@@ -254,6 +255,7 @@ config CPM2
select CPM
select HAVE_PCI
select GPIOLIB
+ select OF_GPIO_MM_GPIOCHIP
help
The CPM2 (Communications Processor Module) is a coprocessor on
embedded CPUs made by Freescale. Selecting this option means that
@@ -31,7 +31,7 @@
#include <mm/mmu_decl.h>
#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
-#include <linux/of_gpio.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
#endif
static int __init cpm_init(void)
@@ -39,6 +39,14 @@ config GPIOLIB_IRQCHIP
select IRQ_DOMAIN
bool
+config OF_GPIO_MM_GPIOCHIP
+ bool
+ help
+ This adds support for the legacy 'struct of_mm_gpio_chip' interface
+ from PowerPC. Existing drivers using this interface need to select
+ this symbol, but new drivers should use the generic gpio-regmap
+ infrastructure instead.
+
config DEBUG_GPIO
bool "Debug GPIO calls"
depends on DEBUG_KERNEL
@@ -131,6 +139,7 @@ config GPIO_ALTERA
tristate "Altera GPIO"
depends on OF_GPIO
select GPIOLIB_IRQCHIP
+ select OF_GPIO_MM_GPIOCHIP
help
Say Y or M here to build support for the Altera PIO device.
@@ -403,6 +412,7 @@ config GPIO_MENZ127
config GPIO_MM_LANTIQ
bool "Lantiq Memory mapped GPIOs"
depends on LANTIQ && SOC_XWAY
+ select OF_GPIO_MM_GPIOCHIP
help
This enables support for memory mapped GPIOs on the External Bus Unit
(EBU) found on Lantiq SoCs. The GPIOs are output only as they are
@@ -411,6 +421,7 @@ config GPIO_MM_LANTIQ
config GPIO_MPC5200
def_bool y
depends on PPC_MPC52xx
+ select OF_GPIO_MM_GPIOCHIP
config GPIO_MPC8XXX
bool "MPC512x/MPC8xxx/QorIQ GPIO support"
@@ -59,11 +59,6 @@ the device tree back-end. It is legacy and should not be used in new code.
Work items:
-- Get rid of struct of_mm_gpio_chip altogether: use the generic MMIO
- GPIO for all current users (see below). Delete struct of_mm_gpio_chip,
- to_of_mm_gpio_chip(), of_mm_gpiochip_add_data(), of_mm_gpiochip_remove()
- from the kernel.
-
- Change all consumer drivers that #include <linux/of_gpio.h> to
#include <linux/gpio/consumer.h> and stop doing custom parsing of the
GPIO lines from the device tree. This can be tricky and often ivolves
@@ -81,6 +76,16 @@ Work items:
uses <linux/gpio/consumer.h> or <linux/gpio/driver.h> instead.
+Get rid of <linux/gpio/legacy-of-mm-gpiochip.h>
+
+Work items:
+
+- Get rid of struct of_mm_gpio_chip altogether: use the generic MMIO
+ GPIO for all current users (see below). Delete struct of_mm_gpio_chip,
+ to_of_mm_gpio_chip(), of_mm_gpiochip_add_data(), of_mm_gpiochip_remove(),
+ CONFIG_OF_GPIO_MM_GPIOCHIP from the kernel.
+
+
Get rid of <linux/gpio.h>
This legacy header is a one stop shop for anything GPIO is closely tied
@@ -7,7 +7,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/gpio/driver.h>
-#include <linux/of_gpio.h> /* For of_mm_gpio_chip */
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
#include <linux/platform_device.h>
#define ALTERA_GPIO_MAX_NGPIO 32
@@ -10,8 +10,8 @@
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/gpio/driver.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -8,7 +8,7 @@
#include <linux/of.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/module.h>
@@ -892,6 +892,8 @@ static int of_gpio_simple_xlate(struct gpio_chip *gc,
return gpiospec->args[0];
}
+#if IS_ENABLED(CONFIG_OF_GPIO_MM_GPIOCHIP)
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
/**
* of_mm_gpiochip_add_data - Add memory mapped GPIO chip (bank)
* @np: device node of the GPIO chip
@@ -964,6 +966,7 @@ void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc)
kfree(gc->label);
}
EXPORT_SYMBOL_GPL(of_mm_gpiochip_remove);
+#endif
#ifdef CONFIG_PINCTRL
static int of_gpiochip_add_pin_range(struct gpio_chip *chip)
@@ -13,7 +13,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_gpio.h> /* for of_mm_gpio_chip */
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/slab.h>
similarity index 50%
copy from include/linux/of_gpio.h
copy to include/linux/gpio/legacy-of-mm-gpiochip.h
@@ -1,26 +1,19 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * OF helpers for the GPIO API
+ * OF helpers for the old of_mm_gpio_chip, used on ppc32 and nios2,
+ * do not use in new code.
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*/
-#ifndef __LINUX_OF_GPIO_H
-#define __LINUX_OF_GPIO_H
+#ifndef __LINUX_GPIO_LEGACY_OF_MM_GPIO_CHIP_H
+#define __LINUX_GPIO_LEGACY_OF_MM_GPIO_CHIP_H
-#include <linux/compiler.h>
#include <linux/gpio/driver.h>
-#include <linux/gpio.h> /* FIXME: Shouldn't be here */
#include <linux/of.h>
-struct device_node;
-
-#ifdef CONFIG_OF_GPIO
-
-#include <linux/container_of.h>
-
/*
* OF GPIO chip for memory mapped banks
*/
@@ -35,25 +28,9 @@ static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
return container_of(gc, struct of_mm_gpio_chip, gc);
}
-extern int of_get_named_gpio(const struct device_node *np,
- const char *list_name, int index);
-
extern int of_mm_gpiochip_add_data(struct device_node *np,
struct of_mm_gpio_chip *mm_gc,
void *data);
extern void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc);
-#else /* CONFIG_OF_GPIO */
-
-#include <linux/errno.h>
-
-/* Drivers may not strictly depend on the GPIO support, so let them link. */
-static inline int of_get_named_gpio(const struct device_node *np,
- const char *propname, int index)
-{
- return -ENOSYS;
-}
-
-#endif /* CONFIG_OF_GPIO */
-
-#endif /* __LINUX_OF_GPIO_H */
+#endif /* __LINUX_GPIO_LEGACY_OF_MM_GPIO_CHIP_H */
@@ -19,30 +19,9 @@ struct device_node;
#ifdef CONFIG_OF_GPIO
-#include <linux/container_of.h>
-
-/*
- * OF GPIO chip for memory mapped banks
- */
-struct of_mm_gpio_chip {
- struct gpio_chip gc;
- void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
- void __iomem *regs;
-};
-
-static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
-{
- return container_of(gc, struct of_mm_gpio_chip, gc);
-}
-
extern int of_get_named_gpio(const struct device_node *np,
const char *list_name, int index);
-extern int of_mm_gpiochip_add_data(struct device_node *np,
- struct of_mm_gpio_chip *mm_gc,
- void *data);
-extern void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc);
-
#else /* CONFIG_OF_GPIO */
#include <linux/errno.h>