From patchwork Sun May 7 21:19:20 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 13233940 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CFB9DC77B75 for ; Sun, 7 May 2023 21:19:31 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231790AbjEGVTa (ORCPT ); Sun, 7 May 2023 17:19:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48216 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231644AbjEGVT2 (ORCPT ); Sun, 7 May 2023 17:19:28 -0400 Received: from mail-lj1-x233.google.com (mail-lj1-x233.google.com [IPv6:2a00:1450:4864:20::233]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5606412EA3 for ; Sun, 7 May 2023 14:19:25 -0700 (PDT) Received: by mail-lj1-x233.google.com with SMTP id 38308e7fff4ca-2ad714536cfso13151001fa.0 for ; Sun, 07 May 2023 14:19:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1683494363; x=1686086363; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=jQ1qf2e03WlPLJuXOlZ1OBamEh8pCtH4w3SZqhsTCas=; b=gOQjODFEyx60bJvAHj8ImMrN5WFGCfGZkIK4W7lPRvxxDsUPO7qHekVariVG1p6T2q XKqPrP8X6LeSUZMQf6ciJS41Yee/2XzN3Yr07AYlCeFnBBsBnxwQKceRtpKNbdIT2SSq 0Utn6R2HSIFpGD9kYk4NArK3sZX0nkuBE7P84xU6h6h56DhEaLQPg6pG6EvDjxglofST izkJwJUgK99dZI3v9YqyBL+VN1d4HfgQ61HgualuYgwldluMJ4Ku+SPXiuXXTeosVZdE pBB/jX//o4r9yscalyvjy0TZLC7hwU4hRUgIXmHbMUIUf4kkdGC6BkmrBlPsMkyVUMRr cyjg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1683494363; x=1686086363; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=jQ1qf2e03WlPLJuXOlZ1OBamEh8pCtH4w3SZqhsTCas=; b=TKrwXVw3amG7p6P1RJFj7AIllZY7jjdlkbmqgCIItigToiKWNxQF4Lksy1JHLv0rWh zgj2W6+RjRIIqh5xgO5YNRNDyMxuCoYKINa6I1vJsLhAlrknXFfrLw0EbADrDfuv2Xvw b6Mkk4ya2yS94lUB6osSjF1Ng/ZEFvTXB5RKmgfuMH3Q2Cc7eqfUEsZi0vlkkgh1G3Ck UueuRaqb5gzgMrs7/u4O2rsvcWl9AKpRcJtHQ1Jzs5ptUMdmHNueCRUnadOkNOlO5iIr /o4ezwDZSRgicNAP7dXZ7/dxOOdzrLju0M/MX6OYA/Vp5ylk/PpJqyCs79cMysQymOq7 R1Fw== X-Gm-Message-State: AC+VfDwa2d34ispSHEy/E8rKqOSzfu7FqrID5mHNY10qefrtUgIW+h1p rm19E6A/E/mYuDHQeIs4ofbuUQ== X-Google-Smtp-Source: ACHHUZ5xfjVDAtU6I0Xjeidp0geO22VrvIZjfkxNd+8IwuNg1i9Y1IDGhyHQd4PWFnvhtqhUf2KxKA== X-Received: by 2002:a19:7518:0:b0:4f1:b3ab:cd61 with SMTP id y24-20020a197518000000b004f1b3abcd61mr1185315lfe.61.1683494363481; Sun, 07 May 2023 14:19:23 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id c27-20020ac244bb000000b004f195cc3918sm623424lfm.176.2023.05.07.14.19.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 07 May 2023 14:19:22 -0700 (PDT) From: Linus Walleij Date: Sun, 07 May 2023 23:19:20 +0200 Subject: [PATCH v3 2/2] dt-bindings: MFD: Convert STMPE to YAML schema MIME-Version: 1.0 Message-Id: <20230426-stmpe-dt-bindings-v3-2-eac1d736e488@linaro.org> References: <20230426-stmpe-dt-bindings-v3-0-eac1d736e488@linaro.org> In-Reply-To: <20230426-stmpe-dt-bindings-v3-0-eac1d736e488@linaro.org> To: Bartosz Golaszewski , Rob Herring , Krzysztof Kozlowski , Maxime Coquelin , Alexandre Torgue , Dmitry Torokhov , Lee Jones , Philippe Schenker , Stefan Agner , Marek Vasut , Steffen Trumtrar Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org, Linus Walleij , Rob Herring X-Mailer: b4 0.12.1 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This converts the STMPE MFD device tree bindings to the YAML schema. Reference the existing schema for the ADC, just define the other subnode schemas directly in the MFD schema. Add two examples so we have examples covering both the simple GPIO expander and the more complex with ADC and touchscreen. Some in-tree users do not follow the naming conventions for nodes so these DTS files need to be augmented to use proper node names like "adc", "pwm", "gpio", "keyboard-controller" etc before the bindings take effect on them. Acked-by: Dmitry Torokhov Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- ChangeLog v2->v3: - Drop the required pwm properties already required by the template pwm schema. - Add the number of PWM cells as const. ChangeLog v1->v2: - Split off the GPIO bindings to their own schema, as the old bindings didn't even have any GPIO bindings. Put the GPIO schema before this schema so we can use GPIO in the examples. - Drop nodename and pattern as STMPE is not a generic name. - Add maxItems to the resets. - Make wakeup-source just :true, as it is a generic property. - Move unevaluatedProperties for subnodes right before properties as requested. - Name devices "port-expander" in the examples. - Use lowercase hex in line init. --- .../devicetree/bindings/input/stmpe-keypad.txt | 41 --- .../bindings/input/touchscreen/stmpe.txt | 108 -------- .../devicetree/bindings/mfd/st,stmpe.yaml | 297 +++++++++++++++++++++ Documentation/devicetree/bindings/mfd/stmpe.txt | 42 --- 4 files changed, 297 insertions(+), 191 deletions(-) diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt deleted file mode 100644 index 12bb771d66d4..000000000000 --- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt +++ /dev/null @@ -1,41 +0,0 @@ -* STMPE Keypad - -Required properties: - - compatible : "st,stmpe-keypad" - - linux,keymap : See ./matrix-keymap.txt - -Optional properties: - - debounce-interval : Debouncing interval time in milliseconds - - st,scan-count : Scanning cycles elapsed before key data is updated - - st,no-autorepeat : If specified device will not autorepeat - - keypad,num-rows : See ./matrix-keymap.txt - - keypad,num-columns : See ./matrix-keymap.txt - -Example: - - stmpe_keypad { - compatible = "st,stmpe-keypad"; - - debounce-interval = <64>; - st,scan-count = <8>; - st,no-autorepeat; - - linux,keymap = <0x205006b - 0x4010074 - 0x3050072 - 0x1030004 - 0x502006a - 0x500000a - 0x5008b - 0x706001c - 0x405000b - 0x6070003 - 0x3040067 - 0x303006c - 0x60400e7 - 0x602009e - 0x4020073 - 0x5050002 - 0x4030069 - 0x3020008>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt deleted file mode 100644 index 238b51555c04..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ /dev/null @@ -1,108 +0,0 @@ -STMPE Touchscreen ----------------- - -Required properties: - - compatible: "st,stmpe-ts" - -Optional properties: -- st,ave-ctrl : Sample average control - 0 -> 1 sample - 1 -> 2 samples - 2 -> 4 samples - 3 -> 8 samples -- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) - 0 -> 10 us - 1 -> 50 us - 2 -> 100 us - 3 -> 500 us - 4 -> 1 ms - 5 -> 5 ms - 6 -> 10 ms - 7 -> 50 ms -- st,settling : Panel driver settling time (recommended is 2) - 0 -> 10 us - 1 -> 100 us - 2 -> 500 us - 3 -> 1 ms - 4 -> 5 ms - 5 -> 10 ms - 6 -> 50 ms - 7 -> 100 ms -- st,fraction-z : Length of the fractional part in z (recommended is 7) - (fraction-z ([0..7]) = Count of the fractional part) -- st,i-drive : current limit value of the touchscreen drivers - 0 -> 20 mA (typical 35mA max) - 1 -> 50 mA (typical 80 mA max) - -Optional properties common with MFD (deprecated): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks - 1 -> 44 clocks - 2 -> 56 clocks - 3 -> 64 clocks - 4 -> 80 clocks (recommended) - 5 -> 96 clocks - 6 -> 124 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC - 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal - 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz - 1 -> 3.25 MHz - 2 || 3 -> 6.5 MHz - -Node should be child node of stmpe node to which it belongs. - -Note that common ADC settings of stmpe_touchscreen (child) will take precedence -over the settings done in MFD. - -Example: - -stmpe811@41 { - compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x41>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio4>; - interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; - /* Common ADC settings */ - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - reg = <0>; - /* 8 sample average control */ - st,ave-ctrl = <3>; - /* 5 ms touch detect interrupt delay */ - st,touch-det-delay = <5>; - /* 1 ms panel driver settling time */ - st,settling = <3>; - /* 7 length fractional part in z */ - st,fraction-z = <7>; - /* - * 50 mA typical 80 mA max touchscreen drivers - * current limit value - */ - st,i-drive = <1>; - }; - stmpe_adc { - compatible = "st,stmpe-adc"; - st,norequest-mask = <0x0F>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml new file mode 100644 index 000000000000..b77cc3f3075d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) + +description: STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. + +maintainers: + - Linus Walleij + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - st,stmpe601 + - st,stmpe801 + - st,stmpe811 + - st,stmpe1600 + - st,stmpe1601 + - st,stmpe2401 + - st,stmpe2403 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: true + + vio-supply: true + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + st,autosleep-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ] + description: Time idle before going to automatic sleep to save power + + st,sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6 ] + description: | + Sample time per iteration + 0 = 36 clock ticks + 1 = 44 clock ticks + 2 = 56 clock ticks + 3 = 64 clock ticks + 4 = 80 clock ticks - recommended + 5 = 96 clock ticks + 6 = 124 clock ticks + + st,mod-12b: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC + + st,ref-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC reference source 0 = internal, 1 = external + + st,adc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + ADC clock speed + 0 = 1.625 MHz + 1 = 3.25 MHz + 2, 3 = 6.5 MHz + + adc: + type: object + $ref: /schemas/iio/adc/st,stmpe-adc.yaml# + + gpio: + type: object + $ref: /schemas/gpio/st,stmpe-gpio.yaml# + + keyboard-controller: + type: object + $ref: /schemas/input/matrix-keymap.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-keypad + + debounce-interval: + description: Debouncing interval in milliseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + st,no-autorepeat: + description: If present, the keys will not autorepeat when pressed + $ref: /schemas/types.yaml#/definitions/flag + + st,scan-count: + description: Scanning cycles elapsed before key data is updated + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - linux,keymap + + pwm: + type: object + $ref: /schemas/pwm/pwm.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-pwm + + "#pwm-cells": + const: 2 + + touchscreen: + type: object + $ref: /schemas/input/touchscreen/touchscreen.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-ts + + st,ave-ctrl: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Sample average control + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + + st,touch-det-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Touch detection delay + 0 = 10 us + 1 = 50 us + 2 = 100 us + 3 = 500 us - recommended + 4 = 1 ms + 5 = 5 ms + 6 = 10 ms + 7 = 50 ms + + st,settling: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Panel driver settling time + 0 = 10 us + 1 = 100 us + 2 = 500 us - recommended + 3 = 1 ms + 4 = 5 ms + 5 = 10 ms + 6 = 50 ms + 7 = 100 ms + + st,fraction-z: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: Length of the fractional part in z, recommended is 7 + (fraction-z ([0..7]) = Count of the fractional part) + + st,i-drive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + current limit value of the touchscreen drivers + 0 = 20 mA (typical 35 mA max) + 1 = 50 mA (typical 80 mA max) + + required: + - compatible + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + port-expander@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; + wakeup-source; + st,autosleep-timeout = <1024>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + st,norequest-mask = <0xf0f002>; + }; + + keyboard-controller { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + MATRIX_KEY(0x00, 0x03, KEY_4) + MATRIX_KEY(0x00, 0x04, KEY_5) + MATRIX_KEY(0x00, 0x05, KEY_6) + MATRIX_KEY(0x00, 0x06, KEY_7) + MATRIX_KEY(0x00, 0x07, KEY_8) + MATRIX_KEY(0x00, 0x08, KEY_9) + MATRIX_KEY(0x00, 0x09, KEY_0) + >; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; + + port-expander@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + st,adc-freq = <1>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <4>; + + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; + #io-channel-cells = <1>; + }; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + + touchscreen { + compatible = "st,stmpe-ts"; + st,ave-ctrl = <3>; + st,touch-det-delay = <5>; + st,settling = <3>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt deleted file mode 100644 index d4408a417193..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ /dev/null @@ -1,42 +0,0 @@ -* ST Microelectronics STMPE Multi-Functional Device - -STMPE is an MFD device which may expose the following inbuilt devices: gpio, -keypad, touchscreen, adc, pwm, rotator. - -Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device - -Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ - -Optional properties for devices with touch and ADC (STMPE811|STMPE610): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks 4 -> 80 clocks (recommended) - 1 -> 44 clocks 5 -> 96 clocks - 2 -> 56 clocks 6 -> 124 clocks - 3 -> 64 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz - 1 -> 3.25 MHz - -Example: - - stmpe1601: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 0x4>; - interrupt-parent = <&gpio6>; - interrupt-controller; - - wakeup-source; - st,autosleep-timeout = <1024>; - };