| Message ID | 20230607144931.v2.1.Id68e30343bb1e11470582a9078b086176cfec46b@changeid (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together | expand |
On 07/06/2023 23:49, Douglas Anderson wrote: > As talked about in the patch ("drm/panel: Add a way for other devices > to follow panel state"), touchscreens that are connected to panels are > generally expected to be power sequenced together with the panel > they're attached to. Today, nothing provides information allowing you > to find out that a touchscreen is connected to a panel. Let's add a > phandle for this. > > The proerty is added to the generic touchscreen bindings and then > enabled in the bindings for the i2c-hid backed devices. This can and > should be added for other touchscreens in the future, but for now > let's start small. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > Changes in v2: > - Move the description to the generic touchscreen.yaml. > - Update the desc to make it clearer it's only for integrated devices. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml index 05e6f2df604c..3e2d216c6432 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -13,6 +13,9 @@ description: Supports the Elan eKTH6915 touchscreen controller. This touchscreen controller uses the i2c-hid protocol with a reset GPIO. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: items: @@ -24,6 +27,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index ce18d7dadae2..72212382d702 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -14,6 +14,9 @@ description: This touchscreen uses the i2c-hid protocol but has some non-standard power sequencing required. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: oneOf: @@ -30,6 +33,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: true diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml index 7156b08f7645..138caad96a29 100644 --- a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml @@ -44,6 +44,8 @@ properties: description: HID descriptor address $ref: /schemas/types.yaml#/definitions/uint32 + panel: true + post-power-on-delay-ms: description: Time required by the device after enabling its regulators or powering it on, before it is ready for communication. diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 895592da9626..431c13335c40 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -10,6 +10,13 @@ maintainers: - Dmitry Torokhov <dmitry.torokhov@gmail.com> properties: + panel: + description: If this touchscreen is integrally connected to a panel, this + is a reference to that panel. The presence of this reference indicates + that the touchscreen should be power sequenced together with the panel + and that they may share power and/or reset signals. + $ref: /schemas/types.yaml#/definitions/phandle + touchscreen-min-x: description: minimum x coordinate reported $ref: /schemas/types.yaml#/definitions/uint32
As talked about in the patch ("drm/panel: Add a way for other devices to follow panel state"), touchscreens that are connected to panels are generally expected to be power sequenced together with the panel they're attached to. Today, nothing provides information allowing you to find out that a touchscreen is connected to a panel. Let's add a phandle for this. The proerty is added to the generic touchscreen bindings and then enabled in the bindings for the i2c-hid backed devices. This can and should be added for other touchscreens in the future, but for now let's start small. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v2: - Move the description to the generic touchscreen.yaml. - Update the desc to make it clearer it's only for integrated devices. Documentation/devicetree/bindings/input/elan,ekth6915.yaml | 5 +++++ .../devicetree/bindings/input/goodix,gt7375p.yaml | 5 +++++ Documentation/devicetree/bindings/input/hid-over-i2c.yaml | 2 ++ .../devicetree/bindings/input/touchscreen/touchscreen.yaml | 7 +++++++ 4 files changed, 19 insertions(+)