[v4,02/24] Input: gpio-vibra - Simplify with dev_err_probe()

Commit Message

Krzysztof Kozlowski June 25, 2023, 4:27 p.m. UTC

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <[e-mail]>
Reviewed-by: Hans de Goede <[e-mail]>
Reviewed-by: Andy Shevchenko <[e-mail]>
---

Changes since v1:
1. Remove unneeded PTR_ERR_OR_ZERO, as pointed by Andy.
---
 drivers/input/misc/gpio-vibra.c | 20 ++++++--------------
 drivers/input/misc/pwm-beeper.c | 19 +++++--------------
 2 files changed, 11 insertions(+), 28 deletions(-)

Comments

Linus Walleij June 26, 2023, 7:14 a.m. UTC | #1

On Sun, Jun 25, 2023 at 6:28 PM Krzysztof Kozlowski
<[e-mail]> wrote:

> Common pattern of handling deferred probe can be simplified with
> dev_err_probe().  Less code and also it prints the error value.
>
> Signed-off-by: Krzysztof Kozlowski <[e-mail]>
> Reviewed-by: Hans de Goede <[e-mail]>
> Reviewed-by: Andy Shevchenko <[e-mail]>

Reviewed-by: Linus Walleij <[e-mail]>

Yours,
Linus Walleij

Patch

diff --git a/drivers/input/misc/gpio-vibra.c b/drivers/input/misc/gpio-vibra.c
index 134a1309ba92..c1c3ba5960dd 100644
--- a/drivers/input/misc/gpio-vibra.c
+++ b/drivers/input/misc/gpio-vibra.c
@@ -113,22 +113,14 @@  static int gpio_vibrator_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
-	err = PTR_ERR_OR_ZERO(vibrator->vcc);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Failed to request regulator: %d\n",
-				err);
-		return err;
-	}
+	if (IS_ERR(vibrator->vcc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(vibrator->vcc),
+				     "Failed to request regulator\n");
 
 	vibrator->gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW);
-	err = PTR_ERR_OR_ZERO(vibrator->gpio);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Failed to request main gpio: %d\n",
-				err);
-		return err;
-	}
+	if (IS_ERR(vibrator->gpio))
+		return dev_err_probe(&pdev->dev, PTR_ERR(vibrator->gpio),
+				     "Failed to request main gpio\n");
 
 	INIT_WORK(&vibrator->play_work, gpio_vibrator_play_work);
 
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index 3cf1812384e6..1e731d8397c6 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -132,13 +132,8 @@  static int pwm_beeper_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	beeper->pwm = devm_pwm_get(dev, NULL);
-	if (IS_ERR(beeper->pwm)) {
-		error = PTR_ERR(beeper->pwm);
-		if (error != -EPROBE_DEFER)
-			dev_err(dev, "Failed to request PWM device: %d\n",
-				error);
-		return error;
-	}
+	if (IS_ERR(beeper->pwm))
+		return dev_err_probe(dev, PTR_ERR(beeper->pwm), "Failed to request PWM device\n");
 
 	/* Sync up PWM state and ensure it is off. */
 	pwm_init_state(beeper->pwm, &state);
@@ -151,13 +146,9 @@  static int pwm_beeper_probe(struct platform_device *pdev)
 	}
 
 	beeper->amplifier = devm_regulator_get(dev, "amp");
-	if (IS_ERR(beeper->amplifier)) {
-		error = PTR_ERR(beeper->amplifier);
-		if (error != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get 'amp' regulator: %d\n",
-				error);
-		return error;
-	}
+	if (IS_ERR(beeper->amplifier))
+		return dev_err_probe(dev, PTR_ERR(beeper->amplifier),
+				     "Failed to get 'amp' regulator\n");
 
 	INIT_WORK(&beeper->work, pwm_beeper_work);