From patchwork Sun Mar 31 10:46:56 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Karel Balej X-Patchwork-Id: 13612202 Received: from smtp1.ms.mff.cuni.cz (smtp-in1.ms.mff.cuni.cz [195.113.20.234]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A5B11144301; Sun, 31 Mar 2024 10:58:46 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=195.113.20.234 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711882729; cv=none; b=X0lF44cJEY0GzKAVhNntyb+ulk6214S1etDEDCRh0J8BPxpf/iHRPnE9i7jfiJelOxpwqIGGZc77QBpLcTnyG2LQkl7roZXBokXOu+sJ/DZcq8nBCartv5SfiJQWxX6DG5JQS7FgsbR4muHVCl5opmyEt/Yj13Iu2t+EcA28h08= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711882729; c=relaxed/simple; bh=6uRmGmtHyqrzE9b7FnR9dGbBDCOqbzypZ1zZcRKGeDI=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=EccNBX8pyjvB7dJbONaTU3kUJCF+l4iB3ysvDHP/FTmFoBOT3a7V2aoQFcAstg8Xtk1wGlwqxnCyYsyFj1dZEqeogNdCsmWuHSRKI7292389+gIFZUZkZ27CahouecO1YVXTMgHX3Ns8sMgcP1CfQJJdKCdQwJqXWcs2CgdpgD4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=matfyz.cz; spf=pass smtp.mailfrom=matfyz.cz; dkim=pass (2048-bit key) header.d=mff.cuni.cz header.i=@mff.cuni.cz header.b=SQPRhtE/; arc=none smtp.client-ip=195.113.20.234 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=matfyz.cz Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=matfyz.cz Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=mff.cuni.cz header.i=@mff.cuni.cz header.b="SQPRhtE/" X-SubmittedBy: id balejk@matfyz.cz subject /postalCode=110+2000/O=Univerzita+20Karlova/street=Ovocn+5CxC3+5CxBD+20trh+20560/5/ST=Praha,+20Hlavn+5CxC3+5CxAD+20m+5CxC4+5Cx9Bsto/C=CZ/CN=Karel+20Balej/emailAddress=balejk@matfyz.cz serial F5FD910E8FE2121B897F7E55B84E351D issued by /C=NL/O=GEANT+20Vereniging/CN=GEANT+20Personal+20CA+204 auth type TLS.CUNI DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mff.cuni.cz; s=submission; t=1711882700; x=1713182700; bh=RMsxrjCCRIAeDDqP+C1o1uh41VPi50Pm6IaAy/MFVnM=; h=From:MIME-Version; b=SQPRhtE/TkO4QNY4mJR6p43o+GefMquSzYM+YEtR1KBt9PSqAmCvKZcHoscslzF2f 0BgnMYEhGDmV9tx+YXSjso681aRzfn234omiBO/L6uRBZjC1BaHHkn9r6e2kW7iwXH kSadmfoCzAmgQ8o5LjaYpYZjFhBfZRyHdjqPBseUTMVuRrARksyyiKpj3FfopkPWHQ KVi3CuAeoMxg5Ih9LM+FvHxnIV6EhLDL1jP6xmlPkIf9QSl99DSBWloSvt0NSq0Nxk PAXIt07nq923QPvrsUFcrXqT22+Bu/DQSpZM3vlhpg/i0YrF8iVGSCARs0+D10ar9Y ZE+jB1igx8g/A== Received: from localhost (internet5.mraknet.com [185.200.108.250]) (authenticated) by smtp1.ms.mff.cuni.cz (8.16.1/8.16.1) with ESMTPS id 42VAwICD095410 (version=TLSv1.3 cipher=TLS_AES_256_GCM_SHA384 bits=256 verify=OK); Sun, 31 Mar 2024 12:58:20 +0200 (CEST) (envelope-from balejk@matfyz.cz) From: Karel Balej To: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Dmitry Torokhov , Liam Girdwood , Mark Brown , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org Cc: =?utf-8?q?Duje_Mihanovi=C4=87?= , ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org Subject: [PATCH 3/5] regulator: add regulators driver for Marvell 88PM886 PMIC Date: Sun, 31 Mar 2024 12:46:56 +0200 Message-ID: <20240331105608.7338-5-balejk@matfyz.cz> X-Mailer: git-send-email 2.44.0 In-Reply-To: <20240331105608.7338-2-balejk@matfyz.cz> References: <20240331105608.7338-2-balejk@matfyz.cz> Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Support the LDO and buck regulators of the Marvell 88PM886 PMIC. Signed-off-by: Karel Balej --- Notes: v1: - Add remaining regulators. - Clean up includes. - Address Mark's feedback: - Use dedicated regmap config. RFC v4: - Initialize regulators regmap in the regulators driver. - Register all regulators at once. - Drop regulator IDs. - Add missing '\n' to dev_err_probe message. - Fix includes. - Add ID table. RFC v3: - Do not have a variable for each regulator -- define them all in the pm886_regulators array. - Use new regulators regmap index name. - Use dev_err_probe. RFC v2: - Drop of_compatible and related code. - Drop unused include. - Remove some abstraction: use only one regmap for all regulators and only mention 88PM886 in Kconfig description. - Reword commit message. drivers/regulator/88pm886-regulator.c | 509 ++++++++++++++++++++++++++ drivers/regulator/Kconfig | 6 + drivers/regulator/Makefile | 1 + 3 files changed, 516 insertions(+) create mode 100644 drivers/regulator/88pm886-regulator.c diff --git a/drivers/regulator/88pm886-regulator.c b/drivers/regulator/88pm886-regulator.c new file mode 100644 index 000000000000..05d24bf444cb --- /dev/null +++ b/drivers/regulator/88pm886-regulator.c @@ -0,0 +1,509 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include +#include +#include +#include +#include + +#include + +#define PM886_PAGE_OFFSET_REGULATORS 1 + +#define PM886_REG_LDO_EN1 0x09 +#define PM886_REG_LDO_EN2 0x0a + +#define PM886_REG_BUCK_EN 0x08 + +#define PM886_REG_LDO1_VOUT 0x20 +#define PM886_REG_LDO2_VOUT 0x26 +#define PM886_REG_LDO3_VOUT 0x2c +#define PM886_REG_LDO4_VOUT 0x32 +#define PM886_REG_LDO5_VOUT 0x38 +#define PM886_REG_LDO6_VOUT 0x3e +#define PM886_REG_LDO7_VOUT 0x44 +#define PM886_REG_LDO8_VOUT 0x4a +#define PM886_REG_LDO9_VOUT 0x50 +#define PM886_REG_LDO10_VOUT 0x56 +#define PM886_REG_LDO11_VOUT 0x5c +#define PM886_REG_LDO12_VOUT 0x62 +#define PM886_REG_LDO13_VOUT 0x68 +#define PM886_REG_LDO14_VOUT 0x6e +#define PM886_REG_LDO15_VOUT 0x74 +#define PM886_REG_LDO16_VOUT 0x7a + +#define PM886_REG_BUCK1_VOUT 0xa5 +#define PM886_REG_BUCK2_VOUT 0xb3 +#define PM886_REG_BUCK3_VOUT 0xc1 +#define PM886_REG_BUCK4_VOUT 0xcf +#define PM886_REG_BUCK5_VOUT 0xdd + +#define PM886_LDO_VSEL_MASK 0x0f +#define PM886_BUCK_VSEL_MASK 0x7f + +static const struct regmap_config pm886_regulator_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = PM886_REG_BUCK5_VOUT, +}; + +struct pm886_regulator { + struct regulator_desc desc; + int max_uA; +}; + +static int pm886_regulator_get_ilim(struct regulator_dev *rdev) +{ + struct pm886_regulator *data = rdev_get_drvdata(rdev); + + if (!data) { + dev_err(&rdev->dev, "Failed to get regulator data\n"); + return -EINVAL; + } + return data->max_uA; +} + +static const struct regulator_ops pm886_ldo_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_current_limit = pm886_regulator_get_ilim, +}; + +static const struct regulator_ops pm886_buck_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_current_limit = pm886_regulator_get_ilim, +}; + +static const unsigned int pm886_ldo_volt_table1[] = { + 1700000, 1800000, 1900000, 2500000, 2800000, 2900000, 3100000, 3300000, +}; + +static const unsigned int pm886_ldo_volt_table2[] = { + 1200000, 1250000, 1700000, 1800000, 1850000, 1900000, 2500000, 2600000, + 2700000, 2750000, 2800000, 2850000, 2900000, 3000000, 3100000, 3300000, +}; + +static const unsigned int pm886_ldo_volt_table3[] = { + 1700000, 1800000, 1900000, 2000000, 2100000, 2500000, 2700000, 2800000, +}; + +static const struct linear_range pm886_buck_volt_ranges1[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 79, 12500), + REGULATOR_LINEAR_RANGE(1600000, 80, 84, 50000), +}; + +static const struct linear_range pm886_buck_volt_ranges2[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 79, 12500), + REGULATOR_LINEAR_RANGE(1600000, 80, 114, 50000), +}; + +static struct pm886_regulator pm886_regulators[] = { + { + .desc = { + .name = "LDO1", + .regulators_node = "regulators", + .of_match = "ldo1", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN1, + .enable_mask = BIT(0), + .volt_table = pm886_ldo_volt_table1, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table1), + .vsel_reg = PM886_REG_LDO1_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 100000, + }, + { + .desc = { + .name = "LDO2", + .regulators_node = "regulators", + .of_match = "ldo2", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN1, + .enable_mask = BIT(1), + .volt_table = pm886_ldo_volt_table1, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table1), + .vsel_reg = PM886_REG_LDO2_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 100000, + }, + { + .desc = { + .name = "LDO3", + .regulators_node = "regulators", + .of_match = "ldo3", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN1, + .enable_mask = BIT(2), + .volt_table = pm886_ldo_volt_table1, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table1), + .vsel_reg = PM886_REG_LDO3_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 100000, + }, + { + .desc = { + .name = "LDO4", + .regulators_node = "regulators", + .of_match = "ldo4", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN1, + .enable_mask = BIT(3), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO4_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 400000, + }, + { + .desc = { + .name = "LDO5", + .regulators_node = "regulators", + .of_match = "ldo5", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN1, + .enable_mask = BIT(4), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO5_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 400000, + }, + { + .desc = { + .name = "LDO6", + .regulators_node = "regulators", + .of_match = "ldo6", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN1, + .enable_mask = BIT(5), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO6_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 400000, + }, + { + .desc = { + .name = "LDO7", + .regulators_node = "regulators", + .of_match = "ldo7", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN1, + .enable_mask = BIT(6), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO7_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 400000, + }, + { + .desc = { + .name = "LDO8", + .regulators_node = "regulators", + .of_match = "ldo8", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN1, + .enable_mask = BIT(7), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO8_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 400000, + }, + { + .desc = { + .name = "LDO9", + .regulators_node = "regulators", + .of_match = "ldo9", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN2, + .enable_mask = BIT(0), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO9_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 400000, + }, + { + .desc = { + .name = "LDO10", + .regulators_node = "regulators", + .of_match = "ldo10", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN2, + .enable_mask = BIT(1), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO10_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 200000, + }, + { + .desc = { + .name = "LDO11", + .regulators_node = "regulators", + .of_match = "ldo11", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN2, + .enable_mask = BIT(2), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO11_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 200000, + }, + { + .desc = { + .name = "LDO12", + .regulators_node = "regulators", + .of_match = "ldo12", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN2, + .enable_mask = BIT(3), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO12_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 200000, + }, + { + .desc = { + .name = "LDO13", + .regulators_node = "regulators", + .of_match = "ldo13", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN2, + .enable_mask = BIT(4), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO13_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 200000, + }, + { + .desc = { + .name = "LDO14", + .regulators_node = "regulators", + .of_match = "ldo14", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN2, + .enable_mask = BIT(5), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO14_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 200000, + }, + { + .desc = { + .name = "LDO15", + .regulators_node = "regulators", + .of_match = "ldo15", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN2, + .enable_mask = BIT(6), + .volt_table = pm886_ldo_volt_table2, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2), + .vsel_reg = PM886_REG_LDO15_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 200000, + }, + { + .desc = { + .name = "LDO16", + .regulators_node = "regulators", + .of_match = "ldo16", + .ops = &pm886_ldo_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = PM886_REG_LDO_EN2, + .enable_mask = BIT(7), + .volt_table = pm886_ldo_volt_table3, + .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table3), + .vsel_reg = PM886_REG_LDO16_VOUT, + .vsel_mask = PM886_LDO_VSEL_MASK, + }, + .max_uA = 200000, + }, + { + .desc = { + .name = "buck1", + .regulators_node = "regulators", + .of_match = "buck1", + .ops = &pm886_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 85, + .linear_ranges = pm886_buck_volt_ranges1, + .n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges1), + .vsel_reg = PM886_REG_BUCK1_VOUT, + .vsel_mask = PM886_BUCK_VSEL_MASK, + .enable_reg = PM886_REG_BUCK_EN, + .enable_mask = BIT(0), + }, + .max_uA = 3000000, + }, + { + .desc = { + .name = "buck2", + .regulators_node = "regulators", + .of_match = "buck2", + .ops = &pm886_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 115, + .linear_ranges = pm886_buck_volt_ranges2, + .n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2), + .vsel_reg = PM886_REG_BUCK2_VOUT, + .vsel_mask = PM886_BUCK_VSEL_MASK, + .enable_reg = PM886_REG_BUCK_EN, + .enable_mask = BIT(1), + }, + .max_uA = 1200000, + }, + { + .desc = { + .name = "buck3", + .regulators_node = "regulators", + .of_match = "buck3", + .ops = &pm886_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 115, + .linear_ranges = pm886_buck_volt_ranges2, + .n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2), + .vsel_reg = PM886_REG_BUCK3_VOUT, + .vsel_mask = PM886_BUCK_VSEL_MASK, + .enable_reg = PM886_REG_BUCK_EN, + .enable_mask = BIT(2), + }, + .max_uA = 1200000, + }, + { + .desc = { + .name = "buck4", + .regulators_node = "regulators", + .of_match = "buck4", + .ops = &pm886_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 115, + .linear_ranges = pm886_buck_volt_ranges2, + .n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2), + .vsel_reg = PM886_REG_BUCK4_VOUT, + .vsel_mask = PM886_BUCK_VSEL_MASK, + .enable_reg = PM886_REG_BUCK_EN, + .enable_mask = BIT(3), + }, + .max_uA = 1200000, + }, + { + .desc = { + .name = "buck5", + .regulators_node = "regulators", + .of_match = "buck5", + .ops = &pm886_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 115, + .linear_ranges = pm886_buck_volt_ranges2, + .n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2), + .vsel_reg = PM886_REG_BUCK5_VOUT, + .vsel_mask = PM886_BUCK_VSEL_MASK, + .enable_reg = PM886_REG_BUCK_EN, + .enable_mask = BIT(4), + }, + .max_uA = 1200000, + }, +}; + +static int pm886_regulator_probe(struct platform_device *pdev) +{ + struct pm886_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct regulator_config rcfg = { }; + struct pm886_regulator *regulator; + struct device *dev = &pdev->dev; + struct regulator_desc *rdesc; + struct regulator_dev *rdev; + struct i2c_client *page; + struct regmap *regmap; + + page = devm_i2c_new_dummy_device(dev, chip->client->adapter, + chip->client->addr + PM886_PAGE_OFFSET_REGULATORS); + if (IS_ERR(page)) + return dev_err_probe(dev, PTR_ERR(page), + "Failed to initialize regulators client\n"); + + regmap = devm_regmap_init_i2c(page, &pm886_regulator_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize regulators regmap\n"); + rcfg.regmap = regmap; + + rcfg.dev = dev->parent; + + for (int i = 0; i < ARRAY_SIZE(pm886_regulators); i++) { + regulator = &pm886_regulators[i]; + rdesc = ®ulator->desc; + rcfg.driver_data = regulator; + rdev = devm_regulator_register(dev, rdesc, &rcfg); + if (IS_ERR(rdev)) + return dev_err_probe(dev, PTR_ERR(rdev), + "Failed to register %s\n", rdesc->name); + } + + return 0; +} + +static const struct platform_device_id pm886_regulator_id_table[] = { + { "88pm886-regulator", }, + { } +}; +MODULE_DEVICE_TABLE(platform, pm886_regulator_id_table); + +static struct platform_driver pm886_regulator_driver = { + .driver = { + .name = "88pm886-regulator", + }, + .probe = pm886_regulator_probe, + .id_table = pm886_regulator_id_table, +}; +module_platform_driver(pm886_regulator_driver); + +MODULE_DESCRIPTION("Marvell 88PM886 PMIC regulator driver"); +MODULE_AUTHOR("Karel Balej "); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7db0a29b5b8d..89845892c533 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -91,6 +91,12 @@ config REGULATOR_88PM8607 help This driver supports 88PM8607 voltage regulator chips. +config REGULATOR_88PM886 + tristate "Marvell 88PM886 voltage regulators" + depends on MFD_88PM886_PMIC + help + This driver implements support for Marvell 88PM886 voltage regulators. + config REGULATOR_ACT8865 tristate "Active-semi act8865 voltage regulator" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 46fb569e6be8..f30089b74b2e 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_88PG86X) += 88pg86x.o obj-$(CONFIG_REGULATOR_88PM800) += 88pm800-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o +obj-$(CONFIG_REGULATOR_88PM886) += 88pm886-regulator.o obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o