| Message ID | 20240502182804.145926-3-christoph.fritz@hexdev.de (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Jiri Kosina |
| Headers | show |
| Series | LIN Bus support for Linux | expand |
On Thu, 2 May 2024, Christoph Fritz wrote: > This patch introduces driver support for the hexLIN USB LIN bus adapter, > enabling LIN communication over USB for both controller and responder > modes. The driver interfaces with the CAN_LIN framework for userland > connectivity. > > For more details on the adapter, visit: https://hexdev.de/hexlin/ > > Tested-by: Andreas Lauser <andreas.lauser@mercedes-benz.com> > Signed-off-by: Christoph Fritz <christoph.fritz@hexdev.de> > --- > drivers/hid/Kconfig | 19 + > drivers/hid/Makefile | 1 + > drivers/hid/hid-hexdev-hexlin.c | 611 ++++++++++++++++++++++++++++++++ > drivers/hid/hid-ids.h | 1 + > drivers/hid/hid-quirks.c | 3 + > 5 files changed, 635 insertions(+) > create mode 100644 drivers/hid/hid-hexdev-hexlin.c > > diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig > index 4c682c6507040..d2fb35d83c640 100644 > --- a/drivers/hid/Kconfig > +++ b/drivers/hid/Kconfig > @@ -496,6 +496,25 @@ config HID_GYRATION > help > Support for Gyration remote control. > > +config HID_MCS_HEXDEV > + tristate "hexDEV LIN-BUS adapter support" > + depends on HID && CAN_NETLINK && CAN_DEV > + select CAN_LIN > + help > + Support for hexDEV its hexLIN USB LIN bus adapter. > + > + Local Interconnect Network (LIN) to USB adapter for controller and > + responder usage. > + This device driver is using CAN_LIN for a userland connection on > + one side and USB HID for the actual hardware adapter on the other > + side. > + > + If you have such an adapter, say Y here and see > + <https://hexdev.de/hexlin>. > + > + To compile this driver as a module, choose M here: the > + module will be called hid-hexlin. > + > config HID_ICADE > tristate "ION iCade arcade controller" > help > diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile > index 082a728eac600..f9b13e6117e60 100644 > --- a/drivers/hid/Makefile > +++ b/drivers/hid/Makefile > @@ -59,6 +59,7 @@ obj-$(CONFIG_HID_GOOGLE_STADIA_FF) += hid-google-stadiaff.o > obj-$(CONFIG_HID_VIVALDI) += hid-vivaldi.o > obj-$(CONFIG_HID_GT683R) += hid-gt683r.o > obj-$(CONFIG_HID_GYRATION) += hid-gyration.o > +obj-$(CONFIG_HID_MCS_HEXDEV) += hid-hexdev-hexlin.o > obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o > obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o > obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o > diff --git a/drivers/hid/hid-hexdev-hexlin.c b/drivers/hid/hid-hexdev-hexlin.c > new file mode 100644 > index 0000000000000..1ddc1e00ab2da > --- /dev/null > +++ b/drivers/hid/hid-hexdev-hexlin.c > @@ -0,0 +1,611 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * LIN bus USB adapter driver https://hexdev.de/hexlin > + * > + * Copyright (C) 2024 hexDEV GmbH > + */ > + > +#include <linux/completion.h> > +#include <linux/hid.h> > +#include <linux/module.h> > +#include <linux/wait.h> > +#include <net/lin.h> > +#include "hid-ids.h" > + > +enum { > + /* answers */ > + HEXLIN_SUCCESS = 0x01, > + HEXLIN_FRAME = 0x02, > + HEXLIN_ERROR = 0x03, > + HEXLIN_FAIL = 0x0F, > + > + /* lin-responder */ > + HEXLIN_SET_MODE_RESPONDER = 0x10, > + HEXLIN_SET_RESPONDER_ANSWER_ID = 0x11, > + HEXLIN_GET_RESPONDER_ANSWER_ID = 0x12, > + > + /* lin-controller */ > + HEXLIN_SET_MODE_CONTROLLER = 0x20, > + HEXLIN_SEND_BREAK = 0x21, > + HEXLIN_SEND_UNCONDITIONAL_FRAME = 0x22, > + > + /* lin-div */ > + HEXLIN_SET_BAUDRATE = 0x34, > + HEXLIN_GET_BAUDRATE = 0x35, > + > + /* div */ > + HEXLIN_RESET = 0xF0, > + HEXLIN_GET_VERSION = 0xF1, Could you align the values? > +}; > + > +#define HEXLIN_SUCCESS_SZ 1 > +#define HEXLIN_FRAME_SZ 17 > +#define HEXLIN_FAIL_SZ 1 > +#define HEXLIN_GET_RESPONDER_ANSWER_ID_SZ 20 > +#define HEXLIN_GET_BAUDRATE_SZ 3 Is this sizeof(hexlin_baudrate_req)? If so, don't add define for it. This probably applies to other defines here too. > +#define HEXLIN_BAUDRATE_SZ 2 > +#define HEXLIN_GET_VERSION_SZ 2 > +#define HEXLIN_PKGLEN_MAX_SZ 64 > + > +struct hexlin_val8_req { > + u8 cmd; > + u8 v; > +} __packed; > + > +struct hexlin_baudrate_req { > + u8 cmd; > + u16 baudrate; > +} __packed; > + > +struct hexlin_frame { > + u32 flags; > + u8 len; > + u8 lin_id; > + u8 data[LIN_MAX_DLEN]; > + u8 checksum; > + u8 checksum_mode; > +} __packed; > + > +struct hexlin_unconditional_req { > + u8 cmd; > + struct hexlin_frame frm; > +} __packed; > + > +struct hexlin_responder_answer { > + u8 is_active; > + u8 is_event_frame; > + u8 event_associated_id; > + struct hexlin_frame frm; > +} __packed; > + > +struct hexlin_responder_answer_req { > + u8 cmd; > + struct hexlin_responder_answer answ; > +} __packed; > + > +struct hexlin_priv_data { > + struct hid_device *hid_dev; > + struct lin_device *ldev; > + u16 baudrate; > + struct completion wait_in_report; > + bool is_error; > + struct mutex tx_lock; /* protects hexlin_tx_report() */ > + struct hexlin_responder_answer_req rar; > + u8 fw_version; > +}; > + > +static int hexlin_tx_report(struct hexlin_priv_data *priv, > + const void *out_report, size_t len) > +{ > + u8 *buf; > + int ret; > + > + buf = kmemdup(out_report, len, GFP_KERNEL); > + if (!buf) > + return -ENOMEM; > + > + ret = hid_hw_output_report(priv->hid_dev, buf, len); > + kfree(buf); Is duplicatign the buffer necessary? > + if (ret < 0) > + return ret; > + if (ret != len) > + return -EIO; > + > + return 0; > +} > + > +static int hexlin_tx_req_status(struct hexlin_priv_data *priv, > + const void *out_report, int len) > +{ > + int ret; > + unsigned long t; > + > + mutex_lock(&priv->tx_lock); > + > + reinit_completion(&priv->wait_in_report); > + > + ret = hexlin_tx_report(priv, out_report, len); > + if (ret) > + goto tx_exit; > + > + t = wait_for_completion_killable_timeout(&priv->wait_in_report, > + msecs_to_jiffies(1000)); HZ? > + if (!t) > + ret = -ETIMEDOUT; > + > + if (priv->is_error) > + ret = -EINVAL; > + > +tx_exit: > + mutex_unlock(&priv->tx_lock); > + > + return ret; > +} > + > +#define HEXLIN_GET_CMD(name, enum_cmd) \ > + static int hexlin_##name(struct hexlin_priv_data *priv) \ > + { \ > + u8 cmd = enum_cmd; \ > + int ret; \ > + \ > + ret = hexlin_tx_req_status(priv, &cmd, sizeof(u8)); \ Take sizeof() of the relevant variable instead, so: sizeof(cmd) > + if (ret) \ > + hid_err(priv->hid_dev, "%s failed with %d\n", \ > + __func__, ret); \ > + \ > + return ret; \ > + } > + > +HEXLIN_GET_CMD(get_version, HEXLIN_GET_VERSION) > +HEXLIN_GET_CMD(reset_dev, HEXLIN_RESET) > +HEXLIN_GET_CMD(get_baudrate, HEXLIN_GET_BAUDRATE) > + > +#define HEXLIN_VAL_CMD(name, enum_cmd, struct_type, vtype) \ > + static int hexlin_##name(struct hexlin_priv_data *p, vtype val) \ > + { \ > + struct struct_type req; \ > + int ret; \ > + \ > + req.cmd = enum_cmd; \ > + req.v = val; \ > + \ > + ret = hexlin_tx_req_status(p, &req, \ > + sizeof(struct struct_type)); \ sizeof(req) > + if (ret) \ > + hid_err(p->hid_dev, "%s failed with %d\n", \ > + __func__, ret); \ > + \ > + return ret; \ > + } > + > +HEXLIN_VAL_CMD(send_break, HEXLIN_SEND_BREAK, hexlin_val8_req, u8) > + > +static int hexlin_queue_frames_insert(struct hexlin_priv_data *priv, > + const u8 *raw_data, int sz) > +{ > + struct hid_device *hdev = priv->hid_dev; > + struct hexlin_frame hxf; > + struct lin_frame lf; > + > + if (sz != sizeof(struct hexlin_frame)) > + return -EREMOTEIO; > + > + memcpy(&hxf, raw_data, sz); Why you cannot just cast the pointer to correct type? > + le32_to_cpus(hxf.flags); You must use correct endianess typing. The struct hexlin_frame should have __le32 flags so sparse's endianness check is happy. But .flags are not used at all so why is this required in the first place? > + lf.len = hxf.len; > + lf.lin_id = hxf.lin_id; > + memcpy(lf.data, hxf.data, LIN_MAX_DLEN); > + lf.checksum = hxf.checksum; > + lf.checksum_mode = hxf.checksum_mode; > + > + hid_dbg(hdev, "id:%02x, len:%u, data:%*ph, checksum:%02x (%s)\n", > + lf.lin_id, lf.len, lf.len, lf.data, lf.checksum, > + lf.checksum_mode ? "enhanced" : "classic"); > + > + lin_rx(priv->ldev, &lf); > + > + return 0; > +} > + > +static int hexlin_send_unconditional(struct hexlin_priv_data *priv, > + const struct hexlin_frame *hxf) > +{ > + struct hexlin_unconditional_req req; > + int ret; > + > + if (hxf->lin_id > LIN_ID_MASK) > + return -EINVAL; > + > + req.cmd = HEXLIN_SEND_UNCONDITIONAL_FRAME; > + memcpy(&req.frm, hxf, sizeof(struct hexlin_frame)); > + > + ret = hexlin_tx_req_status(priv, &req, > + sizeof(struct hexlin_unconditional_req)); sizeof(req) > + > + if (ret) > + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); > + > + return ret; > +} > + > +static int hexlin_set_baudrate(struct hexlin_priv_data *priv, u16 baudrate) > +{ > + struct hexlin_baudrate_req req; > + int ret; > + > + if (baudrate < LIN_MIN_BAUDRATE || baudrate > LIN_MAX_BAUDRATE) > + return -EINVAL; > + > + req.cmd = HEXLIN_SET_BAUDRATE; > + req.baudrate = cpu_to_le16(baudrate); The struct should have __le16 baudrate. > + > + ret = hexlin_tx_req_status(priv, &req, > + sizeof(struct hexlin_baudrate_req)); > + if (ret) > + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); > + > + return ret; > +} > + > +static int hexlin_get_responder_answer_id(struct hexlin_priv_data *priv, u8 id, > + struct hexlin_responder_answer_req *rar) > +{ > + u8 req[2] = { HEXLIN_GET_RESPONDER_ANSWER_ID, id }; > + int ret; > + > + if (id > LIN_ID_MASK) > + return -EINVAL; > + > + ret = hexlin_tx_req_status(priv, &req, sizeof(req)); > + if (ret) { > + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); Try to write error message that is meaningful to user, printing __func__ is not very helpful for user. > + return ret; > + } > + > + memcpy(rar, &priv->rar, sizeof(struct hexlin_responder_answer_req)); sizeof(*rar) > + return 0; > +} > + > +static int hexlin_set_responder_answer_id(struct hexlin_priv_data *priv, > + const struct lin_responder_answer *answ) > +{ > + struct hexlin_responder_answer_req rar; > + int ret; > + > + if (answ->lf.lin_id > LIN_ID_MASK || > + answ->event_associated_id > LIN_ID_MASK) > + return -EINVAL; > + > + rar.cmd = HEXLIN_SET_RESPONDER_ANSWER_ID; > + rar.answ.is_active = answ->is_active; > + rar.answ.is_event_frame = answ->is_event_frame; > + rar.answ.event_associated_id = answ->event_associated_id; > + rar.answ.frm.len = answ->lf.len; > + rar.answ.frm.lin_id = answ->lf.lin_id; > + memcpy(rar.answ.frm.data, answ->lf.data, LIN_MAX_DLEN); > + rar.answ.frm.checksum = answ->lf.checksum; > + rar.answ.frm.checksum_mode = answ->lf.checksum_mode; > + > + ret = hexlin_tx_req_status(priv, &rar, > + sizeof(struct hexlin_responder_answer_req)); Ditto.
On Mon, 2024-05-06 at 19:53 +0300, Ilpo Järvinen wrote: > On Thu, 2 May 2024, Christoph Fritz wrote: > > > This patch introduces driver support for the hexLIN USB LIN bus adapter, > > enabling LIN communication over USB for both controller and responder > > modes. The driver interfaces with the CAN_LIN framework for userland > > connectivity. > > > > For more details on the adapter, visit: https://hexdev.de/hexlin/ > > > > Tested-by: Andreas Lauser <andreas.lauser@mercedes-benz.com> > > Signed-off-by: Christoph Fritz <christoph.fritz@hexdev.de> > > --- > > drivers/hid/Kconfig | 19 + > > drivers/hid/Makefile | 1 + > > drivers/hid/hid-hexdev-hexlin.c | 611 ++++++++++++++++++++++++++++++++ > > drivers/hid/hid-ids.h | 1 + > > drivers/hid/hid-quirks.c | 3 + > > 5 files changed, 635 insertions(+) > > create mode 100644 drivers/hid/hid-hexdev-hexlin.c > > > > diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig > > index 4c682c6507040..d2fb35d83c640 100644 > > --- a/drivers/hid/Kconfig > > +++ b/drivers/hid/Kconfig > > @@ -496,6 +496,25 @@ config HID_GYRATION > > help > > Support for Gyration remote control. > > > > +config HID_MCS_HEXDEV > > + tristate "hexDEV LIN-BUS adapter support" > > + depends on HID && CAN_NETLINK && CAN_DEV > > + select CAN_LIN > > + help > > + Support for hexDEV its hexLIN USB LIN bus adapter. > > + > > + Local Interconnect Network (LIN) to USB adapter for controller and > > + responder usage. > > + This device driver is using CAN_LIN for a userland connection on > > + one side and USB HID for the actual hardware adapter on the other > > + side. > > + > > + If you have such an adapter, say Y here and see > > + <https://hexdev.de/hexlin>. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called hid-hexlin. > > + > > config HID_ICADE > > tristate "ION iCade arcade controller" > > help > > diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile > > index 082a728eac600..f9b13e6117e60 100644 > > --- a/drivers/hid/Makefile > > +++ b/drivers/hid/Makefile > > @@ -59,6 +59,7 @@ obj-$(CONFIG_HID_GOOGLE_STADIA_FF) += hid-google-stadiaff.o > > obj-$(CONFIG_HID_VIVALDI) += hid-vivaldi.o > > obj-$(CONFIG_HID_GT683R) += hid-gt683r.o > > obj-$(CONFIG_HID_GYRATION) += hid-gyration.o > > +obj-$(CONFIG_HID_MCS_HEXDEV) += hid-hexdev-hexlin.o > > obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o > > obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o > > obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o > > diff --git a/drivers/hid/hid-hexdev-hexlin.c b/drivers/hid/hid-hexdev-hexlin.c > > new file mode 100644 > > index 0000000000000..1ddc1e00ab2da > > --- /dev/null > > +++ b/drivers/hid/hid-hexdev-hexlin.c > > @@ -0,0 +1,611 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * LIN bus USB adapter driver https://hexdev.de/hexlin > > + * > > + * Copyright (C) 2024 hexDEV GmbH > > + */ > > + > > +#include <linux/completion.h> > > +#include <linux/hid.h> > > +#include <linux/module.h> > > +#include <linux/wait.h> > > +#include <net/lin.h> > > +#include "hid-ids.h" > > + > > +enum { > > + /* answers */ > > + HEXLIN_SUCCESS = 0x01, > > + HEXLIN_FRAME = 0x02, > > + HEXLIN_ERROR = 0x03, > > + HEXLIN_FAIL = 0x0F, > > + > > + /* lin-responder */ > > + HEXLIN_SET_MODE_RESPONDER = 0x10, > > + HEXLIN_SET_RESPONDER_ANSWER_ID = 0x11, > > + HEXLIN_GET_RESPONDER_ANSWER_ID = 0x12, > > + > > + /* lin-controller */ > > + HEXLIN_SET_MODE_CONTROLLER = 0x20, > > + HEXLIN_SEND_BREAK = 0x21, > > + HEXLIN_SEND_UNCONDITIONAL_FRAME = 0x22, > > + > > + /* lin-div */ > > + HEXLIN_SET_BAUDRATE = 0x34, > > + HEXLIN_GET_BAUDRATE = 0x35, > > + > > + /* div */ > > + HEXLIN_RESET = 0xF0, > > + HEXLIN_GET_VERSION = 0xF1, > > Could you align the values? OK > > > +}; > > + > > +#define HEXLIN_SUCCESS_SZ 1 > > +#define HEXLIN_FRAME_SZ 17 > > +#define HEXLIN_FAIL_SZ 1 > > +#define HEXLIN_GET_RESPONDER_ANSWER_ID_SZ 20 > > +#define HEXLIN_GET_BAUDRATE_SZ 3 > > Is this sizeof(hexlin_baudrate_req)? No > If so, don't add define for it. > This probably applies to other defines here too. I'll refactor these defines in upcoming v4 to a minimum. > > > +#define HEXLIN_BAUDRATE_SZ 2 > > +#define HEXLIN_GET_VERSION_SZ 2 > > +#define HEXLIN_PKGLEN_MAX_SZ 64 > > + > > +struct hexlin_val8_req { > > + u8 cmd; > > + u8 v; > > +} __packed; > > + > > +struct hexlin_baudrate_req { > > + u8 cmd; > > + u16 baudrate; > > +} __packed; > > + > > +struct hexlin_frame { > > + u32 flags; > > + u8 len; > > + u8 lin_id; > > + u8 data[LIN_MAX_DLEN]; > > + u8 checksum; > > + u8 checksum_mode; > > +} __packed; > > + > > +struct hexlin_unconditional_req { > > + u8 cmd; > > + struct hexlin_frame frm; > > +} __packed; > > + > > +struct hexlin_responder_answer { > > + u8 is_active; > > + u8 is_event_frame; > > + u8 event_associated_id; > > + struct hexlin_frame frm; > > +} __packed; > > + > > +struct hexlin_responder_answer_req { > > + u8 cmd; > > + struct hexlin_responder_answer answ; > > +} __packed; > > + > > +struct hexlin_priv_data { > > + struct hid_device *hid_dev; > > + struct lin_device *ldev; > > + u16 baudrate; > > + struct completion wait_in_report; > > + bool is_error; > > + struct mutex tx_lock; /* protects hexlin_tx_report() */ > > + struct hexlin_responder_answer_req rar; > > + u8 fw_version; > > +}; > > + > > +static int hexlin_tx_report(struct hexlin_priv_data *priv, > > + const void *out_report, size_t len) > > +{ > > + u8 *buf; > > + int ret; > > + > > + buf = kmemdup(out_report, len, GFP_KERNEL); > > + if (!buf) > > + return -ENOMEM; > > + > > + ret = hid_hw_output_report(priv->hid_dev, buf, len); > > + kfree(buf); > > Is duplicatign the buffer necessary? No, my intention was to keep the functions calling hexlin_tx_report() simpler and let the compiler optimize this. In the upcoming v4, I merged this into hexlin_tx_req_status() and dropped the kmemdup(). > > > + if (ret < 0) > > + return ret; > > + if (ret != len) > > + return -EIO; > > + > > + return 0; > > +} > > + > > +static int hexlin_tx_req_status(struct hexlin_priv_data *priv, > > + const void *out_report, int len) > > +{ > > + int ret; > > + unsigned long t; > > + > > + mutex_lock(&priv->tx_lock); > > + > > + reinit_completion(&priv->wait_in_report); > > + > > + ret = hexlin_tx_report(priv, out_report, len); > > + if (ret) > > + goto tx_exit; > > + > > + t = wait_for_completion_killable_timeout(&priv->wait_in_report, > > + msecs_to_jiffies(1000)); > > HZ? OK > > > + if (!t) > > + ret = -ETIMEDOUT; > > + > > + if (priv->is_error) > > + ret = -EINVAL; > > + > > +tx_exit: > > + mutex_unlock(&priv->tx_lock); > > + > > + return ret; > > +} > > + > > +#define HEXLIN_GET_CMD(name, enum_cmd) \ > > + static int hexlin_##name(struct hexlin_priv_data *priv) \ > > + { \ > > + u8 cmd = enum_cmd; \ > > + int ret; \ > > + \ > > + ret = hexlin_tx_req_status(priv, &cmd, sizeof(u8)); \ > > Take sizeof() of the relevant variable instead, so: > > sizeof(cmd) OK > > > + if (ret) \ > > + hid_err(priv->hid_dev, "%s failed with %d\n", \ > > + __func__, ret); \ > > + \ > > + return ret; \ > > + } > > + > > +HEXLIN_GET_CMD(get_version, HEXLIN_GET_VERSION) > > +HEXLIN_GET_CMD(reset_dev, HEXLIN_RESET) > > +HEXLIN_GET_CMD(get_baudrate, HEXLIN_GET_BAUDRATE) > > + > > +#define HEXLIN_VAL_CMD(name, enum_cmd, struct_type, vtype) \ > > + static int hexlin_##name(struct hexlin_priv_data *p, vtype val) \ > > + { \ > > + struct struct_type req; \ > > + int ret; \ > > + \ > > + req.cmd = enum_cmd; \ > > + req.v = val; \ > > + \ > > + ret = hexlin_tx_req_status(p, &req, \ > > + sizeof(struct struct_type)); \ > > sizeof(req) OK > > > + if (ret) \ > > + hid_err(p->hid_dev, "%s failed with %d\n", \ > > + __func__, ret); \ > > + \ > > + return ret; \ > > + } > > + > > +HEXLIN_VAL_CMD(send_break, HEXLIN_SEND_BREAK, hexlin_val8_req, u8) > > + > > +static int hexlin_queue_frames_insert(struct hexlin_priv_data *priv, > > + const u8 *raw_data, int sz) > > +{ > > + struct hid_device *hdev = priv->hid_dev; > > + struct hexlin_frame hxf; > > + struct lin_frame lf; > > + > > + if (sz != sizeof(struct hexlin_frame)) > > + return -EREMOTEIO; > > + > > + memcpy(&hxf, raw_data, sz); > > Why you cannot just cast the pointer to correct type? I can, will be refactored in v4. > > > + le32_to_cpus(hxf.flags); > > You must use correct endianess typing. The struct hexlin_frame should have > __le32 flags so sparse's endianness check is happy. OK > > But .flags are not used at all so why is this required in the first place? Was necessary in the development process and will be used in hid_dbg() below in v4. > > > + lf.len = hxf.len; > > + lf.lin_id = hxf.lin_id; > > + memcpy(lf.data, hxf.data, LIN_MAX_DLEN); > > + lf.checksum = hxf.checksum; > > + lf.checksum_mode = hxf.checksum_mode; > > + > > + hid_dbg(hdev, "id:%02x, len:%u, data:%*ph, checksum:%02x (%s)\n", > > + lf.lin_id, lf.len, lf.len, lf.data, lf.checksum, > > + lf.checksum_mode ? "enhanced" : "classic"); > > + > > + lin_rx(priv->ldev, &lf); > > + > > + return 0; > > +} > > + > > +static int hexlin_send_unconditional(struct hexlin_priv_data *priv, > > + const struct hexlin_frame *hxf) > > +{ > > + struct hexlin_unconditional_req req; > > + int ret; > > + > > + if (hxf->lin_id > LIN_ID_MASK) > > + return -EINVAL; > > + > > + req.cmd = HEXLIN_SEND_UNCONDITIONAL_FRAME; > > + memcpy(&req.frm, hxf, sizeof(struct hexlin_frame)); > > + > > + ret = hexlin_tx_req_status(priv, &req, > > + sizeof(struct hexlin_unconditional_req)); > > sizeof(req) OK > > > + > > + if (ret) > > + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); > > + > > + return ret; > > +} > > + > > +static int hexlin_set_baudrate(struct hexlin_priv_data *priv, u16 baudrate) > > +{ > > + struct hexlin_baudrate_req req; > > + int ret; > > + > > + if (baudrate < LIN_MIN_BAUDRATE || baudrate > LIN_MAX_BAUDRATE) > > + return -EINVAL; > > + > > + req.cmd = HEXLIN_SET_BAUDRATE; > > + req.baudrate = cpu_to_le16(baudrate); > > The struct should have __le16 baudrate. OK > > > + > > + ret = hexlin_tx_req_status(priv, &req, > > + sizeof(struct hexlin_baudrate_req)); > > + if (ret) > > + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); > > + > > + return ret; > > +} > > + > > +static int hexlin_get_responder_answer_id(struct hexlin_priv_data *priv, u8 id, > > + struct hexlin_responder_answer_req *rar) > > +{ > > + u8 req[2] = { HEXLIN_GET_RESPONDER_ANSWER_ID, id }; > > + int ret; > > + > > + if (id > LIN_ID_MASK) > > + return -EINVAL; > > + > > + ret = hexlin_tx_req_status(priv, &req, sizeof(req)); > > + if (ret) { > > + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); > > Try to write error message that is meaningful to user, printing __func__ > is not very helpful for user. OK, will be refactored in v4. > > > + return ret; > > + } > > + > > + memcpy(rar, &priv->rar, sizeof(struct hexlin_responder_answer_req)); > > sizeof(*rar) OK > > > + return 0; > > +} > > + > > +static int hexlin_set_responder_answer_id(struct hexlin_priv_data *priv, > > + const struct lin_responder_answer *answ) > > +{ > > + struct hexlin_responder_answer_req rar; > > + int ret; > > + > > + if (answ->lf.lin_id > LIN_ID_MASK || > > + answ->event_associated_id > LIN_ID_MASK) > > + return -EINVAL; > > + > > + rar.cmd = HEXLIN_SET_RESPONDER_ANSWER_ID; > > + rar.answ.is_active = answ->is_active; > > + rar.answ.is_event_frame = answ->is_event_frame; > > + rar.answ.event_associated_id = answ->event_associated_id; > > + rar.answ.frm.len = answ->lf.len; > > + rar.answ.frm.lin_id = answ->lf.lin_id; > > + memcpy(rar.answ.frm.data, answ->lf.data, LIN_MAX_DLEN); > > + rar.answ.frm.checksum = answ->lf.checksum; > > + rar.answ.frm.checksum_mode = answ->lf.checksum_mode; > > + > > + ret = hexlin_tx_req_status(priv, &rar, > > + sizeof(struct hexlin_responder_answer_req)); > > Ditto. OK thanks -- Christoph
On Thu, 9 May 2024, Christoph Fritz wrote: > On Mon, 2024-05-06 at 19:53 +0300, Ilpo Järvinen wrote: > > On Thu, 2 May 2024, Christoph Fritz wrote: > > > > > This patch introduces driver support for the hexLIN USB LIN bus adapter, > > > enabling LIN communication over USB for both controller and responder > > > modes. The driver interfaces with the CAN_LIN framework for userland > > > connectivity. > > > > > > For more details on the adapter, visit: https://hexdev.de/hexlin/ > > > > > > Tested-by: Andreas Lauser <andreas.lauser@mercedes-benz.com> > > > Signed-off-by: Christoph Fritz <christoph.fritz@hexdev.de> > > > --- > > > + le32_to_cpus(hxf.flags); > > > > You must use correct endianess typing. The struct hexlin_frame should have > > __le32 flags so sparse's endianness check is happy. > > OK > > > > > But .flags are not used at all so why is this required in the first place? > > Was necessary in the development process and will be used in hid_dbg() > below in v4. Ok, I was expecting you'd print it out there but since it wasn't, I made the unused comment. BTW, you don't need to reply "OK" to me for the review comments which you're going to do in the next version. I trust you'll address those comments which are not replied into. It saves us both time :-). > > > + lf.len = hxf.len; > > > + lf.lin_id = hxf.lin_id; > > > + memcpy(lf.data, hxf.data, LIN_MAX_DLEN); > > > + lf.checksum = hxf.checksum; > > > + lf.checksum_mode = hxf.checksum_mode; > > > + > > > + hid_dbg(hdev, "id:%02x, len:%u, data:%*ph, checksum:%02x (%s)\n", > > > + lf.lin_id, lf.len, lf.len, lf.data, lf.checksum, > > > + lf.checksum_mode ? "enhanced" : "classic"); > > > + > > > + lin_rx(priv->ldev, &lf); > > > + > > > + return 0; > > > +}
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 4c682c6507040..d2fb35d83c640 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -496,6 +496,25 @@ config HID_GYRATION help Support for Gyration remote control. +config HID_MCS_HEXDEV + tristate "hexDEV LIN-BUS adapter support" + depends on HID && CAN_NETLINK && CAN_DEV + select CAN_LIN + help + Support for hexDEV its hexLIN USB LIN bus adapter. + + Local Interconnect Network (LIN) to USB adapter for controller and + responder usage. + This device driver is using CAN_LIN for a userland connection on + one side and USB HID for the actual hardware adapter on the other + side. + + If you have such an adapter, say Y here and see + <https://hexdev.de/hexlin>. + + To compile this driver as a module, choose M here: the + module will be called hid-hexlin. + config HID_ICADE tristate "ION iCade arcade controller" help diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 082a728eac600..f9b13e6117e60 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_HID_GOOGLE_STADIA_FF) += hid-google-stadiaff.o obj-$(CONFIG_HID_VIVALDI) += hid-vivaldi.o obj-$(CONFIG_HID_GT683R) += hid-gt683r.o obj-$(CONFIG_HID_GYRATION) += hid-gyration.o +obj-$(CONFIG_HID_MCS_HEXDEV) += hid-hexdev-hexlin.o obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o diff --git a/drivers/hid/hid-hexdev-hexlin.c b/drivers/hid/hid-hexdev-hexlin.c new file mode 100644 index 0000000000000..1ddc1e00ab2da --- /dev/null +++ b/drivers/hid/hid-hexdev-hexlin.c @@ -0,0 +1,611 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * LIN bus USB adapter driver https://hexdev.de/hexlin + * + * Copyright (C) 2024 hexDEV GmbH + */ + +#include <linux/completion.h> +#include <linux/hid.h> +#include <linux/module.h> +#include <linux/wait.h> +#include <net/lin.h> +#include "hid-ids.h" + +enum { + /* answers */ + HEXLIN_SUCCESS = 0x01, + HEXLIN_FRAME = 0x02, + HEXLIN_ERROR = 0x03, + HEXLIN_FAIL = 0x0F, + + /* lin-responder */ + HEXLIN_SET_MODE_RESPONDER = 0x10, + HEXLIN_SET_RESPONDER_ANSWER_ID = 0x11, + HEXLIN_GET_RESPONDER_ANSWER_ID = 0x12, + + /* lin-controller */ + HEXLIN_SET_MODE_CONTROLLER = 0x20, + HEXLIN_SEND_BREAK = 0x21, + HEXLIN_SEND_UNCONDITIONAL_FRAME = 0x22, + + /* lin-div */ + HEXLIN_SET_BAUDRATE = 0x34, + HEXLIN_GET_BAUDRATE = 0x35, + + /* div */ + HEXLIN_RESET = 0xF0, + HEXLIN_GET_VERSION = 0xF1, +}; + +#define HEXLIN_SUCCESS_SZ 1 +#define HEXLIN_FRAME_SZ 17 +#define HEXLIN_FAIL_SZ 1 +#define HEXLIN_GET_RESPONDER_ANSWER_ID_SZ 20 +#define HEXLIN_GET_BAUDRATE_SZ 3 +#define HEXLIN_BAUDRATE_SZ 2 +#define HEXLIN_GET_VERSION_SZ 2 +#define HEXLIN_PKGLEN_MAX_SZ 64 + +struct hexlin_val8_req { + u8 cmd; + u8 v; +} __packed; + +struct hexlin_baudrate_req { + u8 cmd; + u16 baudrate; +} __packed; + +struct hexlin_frame { + u32 flags; + u8 len; + u8 lin_id; + u8 data[LIN_MAX_DLEN]; + u8 checksum; + u8 checksum_mode; +} __packed; + +struct hexlin_unconditional_req { + u8 cmd; + struct hexlin_frame frm; +} __packed; + +struct hexlin_responder_answer { + u8 is_active; + u8 is_event_frame; + u8 event_associated_id; + struct hexlin_frame frm; +} __packed; + +struct hexlin_responder_answer_req { + u8 cmd; + struct hexlin_responder_answer answ; +} __packed; + +struct hexlin_priv_data { + struct hid_device *hid_dev; + struct lin_device *ldev; + u16 baudrate; + struct completion wait_in_report; + bool is_error; + struct mutex tx_lock; /* protects hexlin_tx_report() */ + struct hexlin_responder_answer_req rar; + u8 fw_version; +}; + +static int hexlin_tx_report(struct hexlin_priv_data *priv, + const void *out_report, size_t len) +{ + u8 *buf; + int ret; + + buf = kmemdup(out_report, len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = hid_hw_output_report(priv->hid_dev, buf, len); + kfree(buf); + + if (ret < 0) + return ret; + if (ret != len) + return -EIO; + + return 0; +} + +static int hexlin_tx_req_status(struct hexlin_priv_data *priv, + const void *out_report, int len) +{ + int ret; + unsigned long t; + + mutex_lock(&priv->tx_lock); + + reinit_completion(&priv->wait_in_report); + + ret = hexlin_tx_report(priv, out_report, len); + if (ret) + goto tx_exit; + + t = wait_for_completion_killable_timeout(&priv->wait_in_report, + msecs_to_jiffies(1000)); + if (!t) + ret = -ETIMEDOUT; + + if (priv->is_error) + ret = -EINVAL; + +tx_exit: + mutex_unlock(&priv->tx_lock); + + return ret; +} + +#define HEXLIN_GET_CMD(name, enum_cmd) \ + static int hexlin_##name(struct hexlin_priv_data *priv) \ + { \ + u8 cmd = enum_cmd; \ + int ret; \ + \ + ret = hexlin_tx_req_status(priv, &cmd, sizeof(u8)); \ + if (ret) \ + hid_err(priv->hid_dev, "%s failed with %d\n", \ + __func__, ret); \ + \ + return ret; \ + } + +HEXLIN_GET_CMD(get_version, HEXLIN_GET_VERSION) +HEXLIN_GET_CMD(reset_dev, HEXLIN_RESET) +HEXLIN_GET_CMD(get_baudrate, HEXLIN_GET_BAUDRATE) + +#define HEXLIN_VAL_CMD(name, enum_cmd, struct_type, vtype) \ + static int hexlin_##name(struct hexlin_priv_data *p, vtype val) \ + { \ + struct struct_type req; \ + int ret; \ + \ + req.cmd = enum_cmd; \ + req.v = val; \ + \ + ret = hexlin_tx_req_status(p, &req, \ + sizeof(struct struct_type)); \ + if (ret) \ + hid_err(p->hid_dev, "%s failed with %d\n", \ + __func__, ret); \ + \ + return ret; \ + } + +HEXLIN_VAL_CMD(send_break, HEXLIN_SEND_BREAK, hexlin_val8_req, u8) + +static int hexlin_queue_frames_insert(struct hexlin_priv_data *priv, + const u8 *raw_data, int sz) +{ + struct hid_device *hdev = priv->hid_dev; + struct hexlin_frame hxf; + struct lin_frame lf; + + if (sz != sizeof(struct hexlin_frame)) + return -EREMOTEIO; + + memcpy(&hxf, raw_data, sz); + le32_to_cpus(hxf.flags); + + lf.len = hxf.len; + lf.lin_id = hxf.lin_id; + memcpy(lf.data, hxf.data, LIN_MAX_DLEN); + lf.checksum = hxf.checksum; + lf.checksum_mode = hxf.checksum_mode; + + hid_dbg(hdev, "id:%02x, len:%u, data:%*ph, checksum:%02x (%s)\n", + lf.lin_id, lf.len, lf.len, lf.data, lf.checksum, + lf.checksum_mode ? "enhanced" : "classic"); + + lin_rx(priv->ldev, &lf); + + return 0; +} + +static int hexlin_send_unconditional(struct hexlin_priv_data *priv, + const struct hexlin_frame *hxf) +{ + struct hexlin_unconditional_req req; + int ret; + + if (hxf->lin_id > LIN_ID_MASK) + return -EINVAL; + + req.cmd = HEXLIN_SEND_UNCONDITIONAL_FRAME; + memcpy(&req.frm, hxf, sizeof(struct hexlin_frame)); + + ret = hexlin_tx_req_status(priv, &req, + sizeof(struct hexlin_unconditional_req)); + + if (ret) + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); + + return ret; +} + +static int hexlin_set_baudrate(struct hexlin_priv_data *priv, u16 baudrate) +{ + struct hexlin_baudrate_req req; + int ret; + + if (baudrate < LIN_MIN_BAUDRATE || baudrate > LIN_MAX_BAUDRATE) + return -EINVAL; + + req.cmd = HEXLIN_SET_BAUDRATE; + req.baudrate = cpu_to_le16(baudrate); + + ret = hexlin_tx_req_status(priv, &req, + sizeof(struct hexlin_baudrate_req)); + if (ret) + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); + + return ret; +} + +static int hexlin_get_responder_answer_id(struct hexlin_priv_data *priv, u8 id, + struct hexlin_responder_answer_req *rar) +{ + u8 req[2] = { HEXLIN_GET_RESPONDER_ANSWER_ID, id }; + int ret; + + if (id > LIN_ID_MASK) + return -EINVAL; + + ret = hexlin_tx_req_status(priv, &req, sizeof(req)); + if (ret) { + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); + return ret; + } + + memcpy(rar, &priv->rar, sizeof(struct hexlin_responder_answer_req)); + + return 0; +} + +static int hexlin_set_responder_answer_id(struct hexlin_priv_data *priv, + const struct lin_responder_answer *answ) +{ + struct hexlin_responder_answer_req rar; + int ret; + + if (answ->lf.lin_id > LIN_ID_MASK || + answ->event_associated_id > LIN_ID_MASK) + return -EINVAL; + + rar.cmd = HEXLIN_SET_RESPONDER_ANSWER_ID; + rar.answ.is_active = answ->is_active; + rar.answ.is_event_frame = answ->is_event_frame; + rar.answ.event_associated_id = answ->event_associated_id; + rar.answ.frm.len = answ->lf.len; + rar.answ.frm.lin_id = answ->lf.lin_id; + memcpy(rar.answ.frm.data, answ->lf.data, LIN_MAX_DLEN); + rar.answ.frm.checksum = answ->lf.checksum; + rar.answ.frm.checksum_mode = answ->lf.checksum_mode; + + ret = hexlin_tx_req_status(priv, &rar, + sizeof(struct hexlin_responder_answer_req)); + if (ret) + hid_err(priv->hid_dev, "%s failed with %d\n", __func__, ret); + + return ret; +} + +static int hexlin_open(struct lin_device *ldev) +{ + struct hid_device *hdev = to_hid_device(ldev->dev); + + return hid_hw_open(hdev); +} + +static int hexlin_stop(struct lin_device *ldev) +{ + struct hid_device *hdev = to_hid_device(ldev->dev); + struct hexlin_priv_data *priv = hid_get_drvdata(hdev); + + hid_hw_close(hdev); + + priv->is_error = true; + complete(&priv->wait_in_report); + + return 0; +} + +static int hexlin_ldo_tx(struct lin_device *ldev, + const struct lin_frame *lf) +{ + struct hid_device *hdev = to_hid_device(ldev->dev); + struct hexlin_priv_data *priv = hid_get_drvdata(hdev); + int ret = -EINVAL; + + hid_dbg(hdev, "id:%02x, len:%u, data:%*ph, checksum:%02x (%s)\n", + lf->lin_id, lf->len, lf->len, lf->data, lf->checksum, + lf->checksum_mode ? "enhanced" : "classic"); + + if (lf->lin_id && lf->len == 0) { + ret = hexlin_send_break(priv, lf->lin_id); + } else if (lf->len <= LIN_MAX_DLEN) { + struct hexlin_frame hxf; + + hxf.len = lf->len; + hxf.lin_id = lf->lin_id; + memcpy(&hxf.data, lf->data, LIN_MAX_DLEN); + hxf.checksum = lf->checksum; + hxf.checksum_mode = lf->checksum_mode; + ret = hexlin_send_unconditional(priv, &hxf); + } else { + hid_err(hdev, "unknown format\n"); + } + + return ret; +} + +static int hexlin_update_bitrate(struct lin_device *ldev, u16 bitrate) +{ + struct hid_device *hdev = to_hid_device(ldev->dev); + struct hexlin_priv_data *priv = hid_get_drvdata(hdev); + int ret; + + hid_dbg(hdev, "update bitrate to: %u\n", bitrate); + + ret = hexlin_open(ldev); + if (ret) + return ret; + + ret = hexlin_set_baudrate(priv, bitrate); + if (ret) + return ret; + + ret = hexlin_get_baudrate(priv); + if (ret) + return ret; + + if (priv->baudrate != bitrate) { + hid_err(hdev, "update bitrate failed\n"); + return -EINVAL; + } + + return ret; +} + +static int hexlin_get_responder_answer(struct lin_device *ldev, u8 id, + struct lin_responder_answer *answ) +{ + struct hid_device *hdev = to_hid_device(ldev->dev); + struct hexlin_priv_data *priv = hid_get_drvdata(hdev); + struct hexlin_responder_answer_req rar; + int ret; + + if (answ == NULL) + return -EINVAL; + + ret = hexlin_get_responder_answer_id(priv, id, &rar); + if (ret) + return ret; + + answ->is_active = rar.answ.is_active; + answ->is_event_frame = rar.answ.is_event_frame; + answ->event_associated_id = rar.answ.event_associated_id; + answ->lf.len = rar.answ.frm.len; + answ->lf.lin_id = rar.answ.frm.lin_id; + memcpy(answ->lf.data, rar.answ.frm.data, LIN_MAX_DLEN); + answ->lf.checksum = rar.answ.frm.checksum; + answ->lf.checksum_mode = rar.answ.frm.checksum_mode; + + return 0; +} + +static int hexlin_update_resp_answer(struct lin_device *ldev, + const struct lin_responder_answer *answ) +{ + struct hid_device *hdev = to_hid_device(ldev->dev); + struct hexlin_priv_data *priv = hid_get_drvdata(hdev); + + if (answ == NULL) + return -EINVAL; + + return hexlin_set_responder_answer_id(priv, answ); +} + +static const struct lin_device_ops hexlin_ldo = { + .ldo_open = hexlin_open, + .ldo_stop = hexlin_stop, + .ldo_tx = hexlin_ldo_tx, + .update_bitrate = hexlin_update_bitrate, + .get_responder_answer = hexlin_get_responder_answer, + .update_responder_answer = hexlin_update_resp_answer, +}; + +static int hexlin_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *data, int sz) +{ + struct hexlin_priv_data *priv; + int ret; + + if (sz < 1 || sz > HEXLIN_PKGLEN_MAX_SZ) + return -EREMOTEIO; + + priv = hid_get_drvdata(hdev); + + hid_dbg(hdev, "%s, size:%i, data[0]: 0x%02x\n", __func__, sz, data[0]); + + priv->is_error = false; + + switch (data[0]) { + case HEXLIN_SUCCESS: + if (sz != HEXLIN_SUCCESS_SZ) + return -EREMOTEIO; + hid_dbg(hdev, "HEXLIN_SUCCESS: 0x%02x\n", data[0]); + complete(&priv->wait_in_report); + break; + case HEXLIN_FAIL: + if (sz != HEXLIN_FAIL_SZ) + return -EREMOTEIO; + hid_err(hdev, "HEXLIN_FAIL: 0x%02x\n", data[0]); + priv->is_error = true; + complete(&priv->wait_in_report); + break; + case HEXLIN_GET_VERSION: + if (sz != HEXLIN_GET_VERSION_SZ) + return -EREMOTEIO; + priv->fw_version = data[1]; + complete(&priv->wait_in_report); + break; + case HEXLIN_GET_RESPONDER_ANSWER_ID: + if (sz != HEXLIN_GET_RESPONDER_ANSWER_ID_SZ) + return -EREMOTEIO; + BUILD_BUG_ON(sizeof(priv->rar) != + HEXLIN_GET_RESPONDER_ANSWER_ID_SZ); + memcpy(&priv->rar, data, sizeof(priv->rar)); + complete(&priv->wait_in_report); + break; + case HEXLIN_GET_BAUDRATE: + if (sz != HEXLIN_GET_BAUDRATE_SZ) + return -EREMOTEIO; + BUILD_BUG_ON(sizeof(priv->baudrate) != HEXLIN_BAUDRATE_SZ); + memcpy(&priv->baudrate, &data[1], sizeof(priv->baudrate)); + le16_to_cpus(priv->baudrate); + complete(&priv->wait_in_report); + break; + /* following cases not initiated by us, so no complete() */ + case HEXLIN_FRAME: + if (sz != HEXLIN_FRAME_SZ) { + hid_err_once(hdev, "frame size mismatch: %i\n", sz); + return -EREMOTEIO; + } + ret = hexlin_queue_frames_insert(priv, &data[1], sz-1); + if (ret) { + hid_err(hdev, "failed to add frame: %i\n", ret); + return ret; + } + break; + case HEXLIN_ERROR: + hid_err(hdev, "error from adapter\n"); + break; + default: + hid_err(hdev, "unknown event: 0x%02x\n", data[0]); + } + + return 0; +} + +static int init_hw(struct hexlin_priv_data *priv) +{ + int ret; + + ret = hexlin_reset_dev(priv); + if (ret) { + /* if first reset fails, try one more time */ + ret = hexlin_reset_dev(priv); + if (ret) + return ret; + } + + ret = hexlin_get_version(priv); + if (ret) + return ret; + + priv->baudrate = LIN_DEFAULT_BAUDRATE; + ret = hexlin_set_baudrate(priv, priv->baudrate); + if (ret) + return ret; + + return 0; +} + +static int hexlin_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + struct hexlin_priv_data *priv; + int ret; + + priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->hid_dev = hdev; + hid_set_drvdata(hdev, priv); + + mutex_init(&priv->tx_lock); + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "hid parse failed with %d\n", ret); + goto fail_and_free; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DRIVER); + if (ret) { + hid_err(hdev, "hid hw start failed with %d\n", ret); + goto fail_and_stop; + } + + ret = hid_hw_open(hdev); + if (ret) { + hid_err(hdev, "hid hw open failed with %d\n", ret); + goto fail_and_close; + } + + init_completion(&priv->wait_in_report); + + hid_device_io_start(hdev); + + ret = init_hw(priv); + if (ret) + goto fail_and_close; + + priv->ldev = register_lin(&hdev->dev, &hexlin_ldo); + if (IS_ERR_OR_NULL(priv->ldev)) { + ret = PTR_ERR(priv->ldev); + goto fail_and_close; + } + + hid_hw_close(hdev); + + hid_info(hdev, "hexLIN (fw-version: %u) probed\n", priv->fw_version); + + return 0; + +fail_and_close: + hid_hw_close(hdev); +fail_and_stop: + hid_hw_stop(hdev); +fail_and_free: + mutex_destroy(&priv->tx_lock); + return ret; +} + +static void hexlin_remove(struct hid_device *hdev) +{ + struct hexlin_priv_data *priv = hid_get_drvdata(hdev); + + unregister_lin(priv->ldev); + hid_hw_stop(hdev); +} + +static const struct hid_device_id hexlin_table[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_HEXDEV_HEXLIN) }, + { } +}; + +MODULE_DEVICE_TABLE(hid, hexlin_table); + +static struct hid_driver hexlin_driver = { + .name = "hexLIN", + .id_table = hexlin_table, + .probe = hexlin_probe, + .remove = hexlin_remove, + .raw_event = hexlin_raw_event, +}; + +module_hid_driver(hexlin_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christoph Fritz <christoph.fritz@hexdev.de>"); +MODULE_DESCRIPTION("LIN bus driver for hexLIN USB adapter"); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 64164423b592b..8f46d37c2b499 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -907,6 +907,7 @@ #define USB_VENDOR_ID_MCS 0x16d0 #define USB_DEVICE_ID_MCS_GAMEPADBLOCK 0x0bcc +#define USB_DEVICE_ID_MCS_HEXDEV_HEXLIN 0x0648 #define USB_VENDOR_MEGAWORLD 0x07b5 #define USB_DEVICE_ID_MEGAWORLD_GAMEPAD 0x0312 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 1d1949d62dfaf..a514449c50047 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -438,6 +438,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) }, #endif +#if IS_ENABLED(CONFIG_HID_MCS_HEXDEV) + { HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_HEXDEV_HEXLIN) }, +#endif #if IS_ENABLED(CONFIG_HID_HOLTEK) { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) },