@@ -42,11 +42,6 @@ static int tsc2004_probe(struct i2c_client *i2c)
tsc2004_cmd);
}
-static void tsc2004_remove(struct i2c_client *i2c)
-{
- tsc200x_remove(&i2c->dev);
-}
-
static const struct i2c_device_id tsc2004_idtable[] = {
{ "tsc2004" },
{ }
@@ -70,7 +65,6 @@ static struct i2c_driver tsc2004_driver = {
},
.id_table = tsc2004_idtable,
.probe = tsc2004_probe,
- .remove = tsc2004_remove,
};
module_i2c_driver(tsc2004_driver);
@@ -64,11 +64,6 @@ static int tsc2005_probe(struct spi_device *spi)
tsc2005_cmd);
}
-static void tsc2005_remove(struct spi_device *spi)
-{
- tsc200x_remove(&spi->dev);
-}
-
#ifdef CONFIG_OF
static const struct of_device_id tsc2005_of_match[] = {
{ .compatible = "ti,tsc2005" },
@@ -85,7 +80,6 @@ static struct spi_driver tsc2005_driver = {
.pm = pm_sleep_ptr(&tsc200x_pm_ops),
},
.probe = tsc2005_probe,
- .remove = tsc2005_remove,
};
module_spi_driver(tsc2005_driver);
@@ -104,8 +104,6 @@ struct tsc200x {
bool pen_down;
- struct regulator *vio;
-
struct gpio_desc *reset_gpio;
int (*tsc200x_cmd)(struct device *dev, u8 cmd);
int irq;
@@ -495,10 +493,9 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
return error;
}
- ts->vio = devm_regulator_get(dev, "vio");
- if (IS_ERR(ts->vio)) {
- error = PTR_ERR(ts->vio);
- dev_err(dev, "error acquiring vio regulator: %d", error);
+ error = devm_regulator_get_enable(dev, "vio");
+ if (error) {
+ dev_err(dev, "error acquiring vio regulator: %d\n", error);
return error;
}
@@ -554,36 +551,20 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
return error;
}
- error = regulator_enable(ts->vio);
- if (error)
- return error;
-
dev_set_drvdata(dev, ts);
error = input_register_device(ts->idev);
if (error) {
dev_err(dev,
"Failed to register input device, err: %d\n", error);
- goto disable_regulator;
+ return error;
}
irq_set_irq_wake(irq, 1);
return 0;
-
-disable_regulator:
- regulator_disable(ts->vio);
- return error;
}
EXPORT_SYMBOL_GPL(tsc200x_probe);
-void tsc200x_remove(struct device *dev)
-{
- struct tsc200x *ts = dev_get_drvdata(dev);
-
- regulator_disable(ts->vio);
-}
-EXPORT_SYMBOL_GPL(tsc200x_remove);
-
static int tsc200x_suspend(struct device *dev)
{
struct tsc200x *ts = dev_get_drvdata(dev);
@@ -75,6 +75,5 @@ extern const struct attribute_group *tsc200x_groups[];
int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
struct regmap *regmap,
int (*tsc200x_cmd)(struct device *dev, u8 cmd));
-void tsc200x_remove(struct device *dev);
#endif
The chip needs to be powered up before calling tsc200x_stop_scan() which communicates with it; move the call to enable the regulator earlier in tsc200x_probe(). At the same time switch to using devm_regulator_get_enable() to simplify error handling. This also makes sure that regulator is not shut off too early when unbinding the driver. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/input/touchscreen/tsc2004.c | 6 ------ drivers/input/touchscreen/tsc2005.c | 6 ------ drivers/input/touchscreen/tsc200x-core.c | 27 ++++-------------------- drivers/input/touchscreen/tsc200x-core.h | 1 - 4 files changed, 4 insertions(+), 36 deletions(-)