@@ -136,7 +136,6 @@ static void tsc200x_update_pen_state(struct tsc200x *ts,
static irqreturn_t tsc200x_irq_thread(int irq, void *_ts)
{
struct tsc200x *ts = _ts;
- unsigned long flags;
unsigned int pressure;
struct tsc200x_data tsdata;
int error;
@@ -182,13 +181,11 @@ static irqreturn_t tsc200x_irq_thread(int irq, void *_ts)
if (unlikely(pressure > MAX_12BIT))
goto out;
- spin_lock_irqsave(&ts->lock, flags);
-
- tsc200x_update_pen_state(ts, tsdata.x, tsdata.y, pressure);
- mod_timer(&ts->penup_timer,
- jiffies + msecs_to_jiffies(TSC200X_PENUP_TIME_MS));
-
- spin_unlock_irqrestore(&ts->lock, flags);
+ scoped_guard(spinlock_irqsave, &ts->lock) {
+ tsc200x_update_pen_state(ts, tsdata.x, tsdata.y, pressure);
+ mod_timer(&ts->penup_timer,
+ jiffies + msecs_to_jiffies(TSC200X_PENUP_TIME_MS));
+ }
ts->last_valid_interrupt = jiffies;
out:
@@ -198,11 +195,9 @@ static irqreturn_t tsc200x_irq_thread(int irq, void *_ts)
static void tsc200x_penup_timer(struct timer_list *t)
{
struct tsc200x *ts = from_timer(ts, t, penup_timer);
- unsigned long flags;
- spin_lock_irqsave(&ts->lock, flags);
+ guard(spinlock_irqsave)(&ts->lock);
tsc200x_update_pen_state(ts, 0, 0, 0);
- spin_unlock_irqrestore(&ts->lock, flags);
}
static void tsc200x_start_scan(struct tsc200x *ts)
@@ -232,12 +227,10 @@ static void __tsc200x_disable(struct tsc200x *ts)
{
tsc200x_stop_scan(ts);
- disable_irq(ts->irq);
- del_timer_sync(&ts->penup_timer);
+ guard(disable_irq)(&ts->irq);
+ del_timer_sync(&ts->penup_timer);
cancel_delayed_work_sync(&ts->esd_work);
-
- enable_irq(ts->irq);
}
/* must be called with ts->mutex held */
@@ -253,80 +246,79 @@ static void __tsc200x_enable(struct tsc200x *ts)
}
}
-static ssize_t tsc200x_selftest_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+/*
+ * Test TSC200X communications via temp high register.
+ */
+static int tsc200x_do_selftest(struct tsc200x *ts)
{
- struct tsc200x *ts = dev_get_drvdata(dev);
- unsigned int temp_high;
unsigned int temp_high_orig;
unsigned int temp_high_test;
- bool success = true;
+ unsigned int temp_high;
int error;
- mutex_lock(&ts->mutex);
-
- /*
- * Test TSC200X communications via temp high register.
- */
- __tsc200x_disable(ts);
-
error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high_orig);
if (error) {
- dev_warn(dev, "selftest failed: read error %d\n", error);
- success = false;
- goto out;
+ dev_warn(ts->dev, "selftest failed: read error %d\n", error);
+ return error;
}
temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
error = regmap_write(ts->regmap, TSC200X_REG_TEMP_HIGH, temp_high_test);
if (error) {
- dev_warn(dev, "selftest failed: write error %d\n", error);
- success = false;
- goto out;
+ dev_warn(ts->dev, "selftest failed: write error %d\n", error);
+ return error;
}
error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high);
if (error) {
- dev_warn(dev, "selftest failed: read error %d after write\n",
- error);
- success = false;
- goto out;
- }
-
- if (temp_high != temp_high_test) {
- dev_warn(dev, "selftest failed: %d != %d\n",
- temp_high, temp_high_test);
- success = false;
+ dev_warn(ts->dev,
+ "selftest failed: read error %d after write\n", error);
+ return error;
}
/* hardware reset */
tsc200x_reset(ts);
- if (!success)
- goto out;
+ if (temp_high != temp_high_test) {
+ dev_warn(ts->dev, "selftest failed: %d != %d\n",
+ temp_high, temp_high_test);
+ return -EINVAL;
+ }
/* test that the reset really happened */
error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high);
if (error) {
- dev_warn(dev, "selftest failed: read error %d after reset\n",
- error);
- success = false;
- goto out;
+ dev_warn(ts->dev,
+ "selftest failed: read error %d after reset\n", error);
+ return error;
}
if (temp_high != temp_high_orig) {
- dev_warn(dev, "selftest failed after reset: %d != %d\n",
+ dev_warn(ts->dev, "selftest failed after reset: %d != %d\n",
temp_high, temp_high_orig);
- success = false;
+ return -EINVAL;
}
-out:
- __tsc200x_enable(ts);
- mutex_unlock(&ts->mutex);
+ return 0;
+}
- return sprintf(buf, "%d\n", success);
+static ssize_t tsc200x_selftest_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct tsc200x *ts = dev_get_drvdata(dev);
+ int error;
+
+ scoped_guard(mutex, &ts->mutex) {
+ __tsc200x_disable(ts);
+
+ error = tsc200x_do_selftest(ts);
+
+ __tsc200x_enable(ts);
+ }
+
+ return sprintf(buf, "%d\n", !error);
}
static DEVICE_ATTR(selftest, S_IRUGO, tsc200x_selftest_show, NULL);
@@ -368,46 +360,42 @@ static void tsc200x_esd_work(struct work_struct *work)
int error;
unsigned int r;
- if (!mutex_trylock(&ts->mutex)) {
- /*
- * If the mutex is taken, it means that disable or enable is in
- * progress. In that case just reschedule the work. If the work
- * is not needed, it will be canceled by disable.
- */
- goto reschedule;
- }
-
- if (time_is_after_jiffies(ts->last_valid_interrupt +
- msecs_to_jiffies(ts->esd_timeout)))
- goto out;
-
- /* We should be able to read register without disabling interrupts. */
- error = regmap_read(ts->regmap, TSC200X_REG_CFR0, &r);
- if (!error &&
- !((r ^ TSC200X_CFR0_INITVALUE) & TSC200X_CFR0_RW_MASK)) {
- goto out;
- }
-
/*
- * If we could not read our known value from configuration register 0
- * then we should reset the controller as if from power-up and start
- * scanning again.
+ * If the mutex is taken, it means that disable or enable is in
+ * progress. In that case just reschedule the work. If the work
+ * is not needed, it will be canceled by disable.
*/
- dev_info(ts->dev, "TSC200X not responding - resetting\n");
+ scoped_guard(mutex_try, &ts->mutex) {
+ if (time_is_after_jiffies(ts->last_valid_interrupt +
+ msecs_to_jiffies(ts->esd_timeout)))
+ break;
- disable_irq(ts->irq);
- del_timer_sync(&ts->penup_timer);
+ /*
+ * We should be able to read register without disabling
+ * interrupts.
+ */
+ error = regmap_read(ts->regmap, TSC200X_REG_CFR0, &r);
+ if (!error &&
+ !((r ^ TSC200X_CFR0_INITVALUE) & TSC200X_CFR0_RW_MASK)) {
+ break;
+ }
- tsc200x_update_pen_state(ts, 0, 0, 0);
+ /*
+ * If we could not read our known value from configuration
+ * register 0 then we should reset the controller as if from
+ * power-up and start scanning again.
+ */
+ dev_info(ts->dev, "TSC200X not responding - resetting\n");
- tsc200x_reset(ts);
+ scoped_guard(disable_irq, &ts->irq) {
+ del_timer_sync(&ts->penup_timer);
+ tsc200x_update_pen_state(ts, 0, 0, 0);
+ tsc200x_reset(ts);
+ }
- enable_irq(ts->irq);
- tsc200x_start_scan(ts);
+ tsc200x_start_scan(ts);
+ }
-out:
- mutex_unlock(&ts->mutex);
-reschedule:
/* re-arm the watchdog */
schedule_delayed_work(&ts->esd_work,
round_jiffies_relative(
@@ -418,15 +406,13 @@ static int tsc200x_open(struct input_dev *input)
{
struct tsc200x *ts = input_get_drvdata(input);
- mutex_lock(&ts->mutex);
+ guard(mutex)(&ts->mutex);
if (!ts->suspended)
__tsc200x_enable(ts);
ts->opened = true;
- mutex_unlock(&ts->mutex);
-
return 0;
}
@@ -434,14 +420,12 @@ static void tsc200x_close(struct input_dev *input)
{
struct tsc200x *ts = input_get_drvdata(input);
- mutex_lock(&ts->mutex);
+ guard(mutex)(&ts->mutex);
if (!ts->suspended)
__tsc200x_disable(ts);
ts->opened = false;
-
- mutex_unlock(&ts->mutex);
}
int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
@@ -573,7 +557,7 @@ static int tsc200x_suspend(struct device *dev)
{
struct tsc200x *ts = dev_get_drvdata(dev);
- mutex_lock(&ts->mutex);
+ guard(mutex)(&ts->mutex);
if (!ts->suspended && ts->opened)
__tsc200x_disable(ts);
@@ -583,8 +567,6 @@ static int tsc200x_suspend(struct device *dev)
if (device_may_wakeup(dev))
ts->wake_irq_enabled = enable_irq_wake(ts->irq) == 0;
- mutex_unlock(&ts->mutex);
-
return 0;
}
@@ -592,7 +574,7 @@ static int tsc200x_resume(struct device *dev)
{
struct tsc200x *ts = dev_get_drvdata(dev);
- mutex_lock(&ts->mutex);
+ guard(mutex)(&ts->mutex);
if (ts->wake_irq_enabled) {
disable_irq_wake(ts->irq);
@@ -604,8 +586,6 @@ static int tsc200x_resume(struct device *dev)
ts->suspended = false;
- mutex_unlock(&ts->mutex);
-
return 0;
}
This makes the code more compact and error handling more robust. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/input/touchscreen/tsc200x-core.c | 182 ++++++++++------------- 1 file changed, 81 insertions(+), 101 deletions(-)