@@ -118,9 +118,14 @@ config SND_SOC_QDSP6_PRM
tristate
select SND_SOC_QDSP6_PRM_LPASS_CLOCKS
+config SND_SOC_QCOM_OFFLOAD_UTILS
+ tristate
+
config SND_SOC_QDSP6_USB
tristate "SoC ALSA USB offloading backing for QDSP6"
depends on SND_SOC_USB
+ select SND_SOC_QCOM_OFFLOAD_UTILS
+
help
Adds support for USB offloading for QDSP6 ASoC
based platform sound cards. This will enable the
@@ -30,6 +30,7 @@ snd-soc-sc8280xp-y := sc8280xp.o
snd-soc-qcom-common-y := common.o
snd-soc-qcom-sdw-y := sdw.o
snd-soc-x1e80100-y := x1e80100.o
+snd-soc-qcom-offload-utils-objs := usb_offload_utils.o
obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
obj-$(CONFIG_SND_SOC_QCOM_SDW) += snd-soc-qcom-sdw.o
obj-$(CONFIG_SND_SOC_X1E80100) += snd-soc-x1e80100.o
+obj-$(CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS) += snd-soc-qcom-offload-utils.o
#DSP lib
obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <sound/asound.h>
+#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/q6usboffload.h>
@@ -30,6 +31,7 @@
struct q6usb_port_data {
struct q6afe_usb_cfg usb_cfg;
struct snd_soc_usb *usb;
+ struct snd_soc_jack *hs_jack;
struct q6usb_offload priv;
/* Protects against operations between SOC USB and ASoC */
@@ -142,16 +144,54 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
mutex_lock(&data->mutex);
if (connected) {
+ if (data->hs_jack)
+ snd_jack_report(data->hs_jack->jack, SND_JACK_USB);
+
/* Selects the latest USB headset plugged in for offloading */
list_add_tail(&sdev->list, &data->devices);
} else {
list_del(&sdev->list);
+
+ if (data->hs_jack)
+ snd_jack_report(data->hs_jack->jack, 0);
}
mutex_unlock(&data->mutex);
return 0;
}
+static void q6usb_component_disable_jack(struct q6usb_port_data *data)
+{
+ /* Offload jack has already been disabled */
+ if (!data->hs_jack)
+ return;
+
+ snd_jack_report(data->hs_jack->jack, 0);
+ data->hs_jack = NULL;
+}
+
+static void q6usb_component_enable_jack(struct q6usb_port_data *data,
+ struct snd_soc_jack *jack)
+{
+ snd_jack_report(jack->jack, !list_empty(&data->devices) ? SND_JACK_USB : 0);
+ data->hs_jack = jack;
+}
+
+static int q6usb_component_set_jack(struct snd_soc_component *component,
+ struct snd_soc_jack *jack, void *priv)
+{
+ struct q6usb_port_data *data = dev_get_drvdata(component->dev);
+
+ mutex_lock(&data->mutex);
+ if (jack)
+ q6usb_component_enable_jack(data, jack);
+ else
+ q6usb_component_disable_jack(data);
+ mutex_unlock(&data->mutex);
+
+ return 0;
+}
+
static int q6usb_component_probe(struct snd_soc_component *component)
{
struct q6usb_port_data *data = dev_get_drvdata(component->dev);
@@ -179,6 +219,7 @@ static void q6usb_component_remove(struct snd_soc_component *component)
static const struct snd_soc_component_driver q6usb_dai_component = {
.probe = q6usb_component_probe,
+ .set_jack = q6usb_component_set_jack,
.remove = q6usb_component_remove,
.name = "q6usb-dai-component",
.dapm_widgets = q6usb_dai_widgets,
@@ -12,6 +12,7 @@
#include <linux/input-event-codes.h>
#include "qdsp6/q6afe.h"
#include "common.h"
+#include "usb_offload_utils.h"
#include "sdw.h"
#define DRIVER_NAME "sm8250"
@@ -22,14 +23,34 @@ struct sm8250_snd_data {
struct snd_soc_card *card;
struct sdw_stream_runtime *sruntime[AFE_PORT_MAX];
struct snd_soc_jack jack;
+ struct snd_soc_jack usb_offload_jack;
+ bool usb_offload_jack_setup;
bool jack_setup;
};
static int sm8250_snd_init(struct snd_soc_pcm_runtime *rtd)
{
struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+ int ret;
+
+ if (cpu_dai->id == USB_RX)
+ ret = qcom_snd_usb_offload_jack_setup(rtd, &data->usb_offload_jack,
+ &data->usb_offload_jack_setup);
+ else
+ ret = qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
+ return ret;
+}
+
+static void sm8250_snd_exit(struct snd_soc_pcm_runtime *rtd)
+{
+ struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+
+ if (cpu_dai->id == USB_RX)
+ qcom_snd_usb_offload_jack_remove(rtd,
+ &data->usb_offload_jack_setup);
- return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
}
static int sm8250_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
@@ -129,6 +150,7 @@ static void sm8250_add_be_ops(struct snd_soc_card *card)
for_each_card_prelinks(card, i, link) {
if (link->no_pcm == 1) {
link->init = sm8250_snd_init;
+ link->exit = sm8250_snd_exit;
link->be_hw_params_fixup = sm8250_be_hw_params_fixup;
link->ops = &sm8250_be_ops;
}
new file mode 100644
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <linux/module.h>
+#include <sound/jack.h>
+#include <sound/soc-usb.h>
+
+#include "usb_offload_utils.h"
+
+int qcom_snd_usb_offload_jack_setup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_jack *jack, bool *jack_setup)
+{
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
+ int ret = 0;
+
+ if (cpu_dai->id != USB_RX)
+ return -EINVAL;
+
+ if (!*jack_setup) {
+ ret = snd_soc_usb_setup_offload_jack(codec_dai->component, jack);
+ if (ret)
+ return ret;
+ }
+
+ *jack_setup = true;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_snd_usb_offload_jack_setup);
+
+int qcom_snd_usb_offload_jack_remove(struct snd_soc_pcm_runtime *rtd,
+ bool *jack_setup)
+{
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
+ int ret = 0;
+
+ if (cpu_dai->id != USB_RX)
+ return -EINVAL;
+
+ if (*jack_setup) {
+ ret = snd_soc_usb_disable_offload_jack(codec_dai->component);
+ if (ret)
+ return ret;
+ }
+
+ *jack_setup = false;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_snd_usb_offload_jack_remove);
+MODULE_DESCRIPTION("ASoC Q6 USB offload controls");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#ifndef __QCOM_SND_USB_OFFLOAD_UTILS_H__
+#define __QCOM_SND_USB_OFFLOAD_UTILS_H__
+
+#include <sound/soc.h>
+
+#if IS_ENABLED(CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS)
+int qcom_snd_usb_offload_jack_setup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_jack *jack, bool *jack_setup);
+
+int qcom_snd_usb_offload_jack_remove(struct snd_soc_pcm_runtime *rtd,
+ bool *jack_setup);
+#else
+static inline int qcom_snd_usb_offload_jack_setup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_jack *jack,
+ bool *jack_setup)
+{
+ return -ENODEV;
+}
+
+static inline int qcom_snd_usb_offload_jack_remove(struct snd_soc_pcm_runtime *rtd,
+ bool *jack_setup)
+{
+ return -ENODEV;
+}
+#endif /* IS_ENABLED(CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS) */
+#endif /* __QCOM_SND_USB_OFFLOAD_UTILS_H__ */
The headphone jack framework has a well defined infrastructure for notifying userspace entities through input devices. Expose a jack device that carries information about if an offload capable device is connected. Applications can further identify specific offloading information through other SND kcontrols. Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> --- sound/soc/qcom/Kconfig | 5 +++ sound/soc/qcom/Makefile | 2 ++ sound/soc/qcom/qdsp6/q6usb.c | 41 ++++++++++++++++++++++ sound/soc/qcom/sm8250.c | 24 ++++++++++++- sound/soc/qcom/usb_offload_utils.c | 56 ++++++++++++++++++++++++++++++ sound/soc/qcom/usb_offload_utils.h | 30 ++++++++++++++++ 6 files changed, 157 insertions(+), 1 deletion(-) create mode 100644 sound/soc/qcom/usb_offload_utils.c create mode 100644 sound/soc/qcom/usb_offload_utils.h