[6/6] Input: matrix_keypad - detect change during scan

Commit Message

Markus Burri Oct. 31, 2024, 6:30 a.m. UTC

For a setup where the matrix keypad is connected over a slow interface
(e.g. a gpio-expansion over i2c), the scan can take a longer time to read.

Interrupts need to be disabled during scan. And therefore changes in this
period are not detected.
To improve this situation, scan the matrix again if the row state changed
during interrupts disabled.

Signed-off-by: Markus Burri <[e-mail]>
Reviewed-by: Manuel Traut <[e-mail]>
Tested-by: HeDong Zhao <[e-mail]>
---
 drivers/input/keyboard/matrix_keypad.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Patch

diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index f0d3004..428b36e 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -126,6 +126,10 @@  static void matrix_keypad_scan(struct work_struct *work)
 	const unsigned short *keycodes = input_dev->keycode;
 	uint32_t new_state[MATRIX_MAX_COLS];
 	int row, col, code;
+	u32 init_row_state, new_row_state;
+
+	/* read initial row state to detect changes between scan */
+	init_row_state = read_row_state(keypad);
 
 	/* de-activate all columns for scanning */
 	activate_all_cols(keypad, false);
@@ -171,6 +175,19 @@  static void matrix_keypad_scan(struct work_struct *work)
 	keypad->scan_pending = false;
 	enable_row_irqs(keypad);
 	spin_unlock_irq(&keypad->lock);
+
+	/* read new row state and detect if value has changed */
+	new_row_state = read_row_state(keypad);
+	if (init_row_state != new_row_state) {
+		spin_lock_irq(&keypad->lock);
+		if (likely(!keypad->scan_pending && !keypad->stopped)) {
+			disable_row_irqs(keypad);
+			keypad->scan_pending = true;
+			schedule_delayed_work(&keypad->work,
+					      msecs_to_jiffies(keypad->debounce_ms));
+		}
+		spin_unlock_irq(&keypad->lock);
+	}
 }
 
 static irqreturn_t matrix_keypad_interrupt(int irq, void *id)