From patchwork Thu Nov 28 22:29:18 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sasha Finkelstein via B4 Relay X-Patchwork-Id: 13888349 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1ECE31C3045; Thu, 28 Nov 2024 22:29:22 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732832963; cv=none; b=pEpP+6vMqn8k/7+Gl5Ggb0b3ILHyJCIXWBJoGRWGfDx9gPCnUBAlOU/C7QrCTJciQaoDPtsg5qyiep2hCNl5x+2hS98P7BUj8CBHUx+/Z4wG0fv1lRJ/vEnetDJjgQD/x714hDBpWh1Ordnnb892tfqYHsjKu0lz8btWDktGbRA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732832963; c=relaxed/simple; bh=nFKy5PWFnllh2Nvg/Zxy7+7J22v4t/Ihd7HtCcKxeuk=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=J4jvvlfbgQoVoxjuuxWw/85giDBuZzkCzaGsQqC9NW/QbOlcci+mJ4yCLj9g/EmzWo1ejmf/e2e5dS5g89ARsfGE6XN2P7+xzCKFptuxw2Dn9fUiKHou25YFO26jgMpQFb2i4fOAijp6rDdJVxZ39uEtu4fzO7o6TXgEcpJu77Q= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=iqF4Ay0a; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="iqF4Ay0a" Received: by smtp.kernel.org (Postfix) with ESMTPS id CADC0C4CED8; Thu, 28 Nov 2024 22:29:22 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1732832962; bh=nFKy5PWFnllh2Nvg/Zxy7+7J22v4t/Ihd7HtCcKxeuk=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=iqF4Ay0aBQzIdjUO+NwRpKomDryWTeCzc6uHsTgZo26PBaT9s707tWDSrMgrSAVo6 XnX7s6X5USkF1X40Zzr9pUMrWR7SA2K0qScgxwuR/ylcYCg7TdnA9OuOzepN2NITIE ATYzB4xlIn5C0sJ3i1I1ObmC0q7n9dwHQMtLDJxGiFmgfSIwjwzBvgknWcZaGYMFFS dy5/LLOodJpoSL7v7ogyZ9VAAUFm1MOyOBNb8dlS01gWrZAt3AiVk44UdMKF98F7HG QigYpSVrigAgXZcEr0sM4wqR3qf13a0VGA2Ao+L7thNpbhjJ62qbGEOq41Gw0WJ1ow hxq/8K2+48wyw== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id C123AD70DF8; Thu, 28 Nov 2024 22:29:22 +0000 (UTC) From: Sasha Finkelstein via B4 Relay Date: Thu, 28 Nov 2024 23:29:18 +0100 Subject: [PATCH v2 3/4] arm64: dts: apple: Add touchbar digitizer nodes Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241128-z2-v2-3-76cc59bbf117@gmail.com> References: <20241128-z2-v2-0-76cc59bbf117@gmail.com> In-Reply-To: <20241128-z2-v2-0-76cc59bbf117@gmail.com> To: Hector Martin , Sven Peter , Alyssa Rosenzweig , Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Henrik Rydberg Cc: asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sasha Finkelstein , Janne Grunau X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1732832961; l=5133; i=fnkl.kernel@gmail.com; s=20241124; h=from:subject:message-id; bh=z8oLT47i5sni374Wote7Xm731uRJeSKzgjn2mB31bRE=; b=vkJJjk22h7t1ShUWWM4Oss5KomULzwLuU5dhYO5PgeBhnlYdClzxU1IaLAMiQ9RRdtmjCOr0I ePGH4/TVvUDDvQWYMa32B7AXx6wmmmOdIr8t9wcZJus4tFfddPMFSfN X-Developer-Key: i=fnkl.kernel@gmail.com; a=ed25519; pk=aSkp1PdZ+eF4jpMO6oLvz/YfT5XkBUneWwyhQrOgmsU= X-Endpoint-Received: by B4 Relay for fnkl.kernel@gmail.com/20241124 with auth_id=283 X-Original-From: Sasha Finkelstein Reply-To: fnkl.kernel@gmail.com From: Sasha Finkelstein Adds device tree entries for the touchbar digitizer Co-developed-by: Janne Grunau Signed-off-by: Janne Grunau Signed-off-by: Sasha Finkelstein --- arch/arm64/boot/dts/apple/t8103-j293.dts | 26 ++++++++++++++++++++++++++ arch/arm64/boot/dts/apple/t8103.dtsi | 20 ++++++++++++++++++++ arch/arm64/boot/dts/apple/t8112-j493.dts | 24 ++++++++++++++++++++++++ arch/arm64/boot/dts/apple/t8112.dtsi | 14 ++++++++++++++ 4 files changed, 84 insertions(+) diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts index 56b0c67bfcda321b60c621de092643017693ff91..c31eb3f6f54268cafc9197a9244a5954fbb42802 100644 --- a/arch/arm64/boot/dts/apple/t8103-j293.dts +++ b/arch/arm64/boot/dts/apple/t8103-j293.dts @@ -17,6 +17,14 @@ / { compatible = "apple,j293", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M1, 2020)"; + /* + * All of those are used by the bootloader to pass calibration + * blobs and other device-specific properties + */ + aliases { + touchbar0 = &touchbar0; + }; + led-controller { compatible = "pwm-leds"; led-0 { @@ -49,3 +57,21 @@ &i2c4 { &fpwm1 { status = "okay"; }; + +&spi0 { + status = "okay"; + + touchbar0: touchbar@0 { + compatible = "apple,j293-touchbar"; + reg = <0>; + spi-max-frequency = <11500000>; + spi-cs-setup-delay-ns = <2000>; + spi-cs-hold-delay-ns = <2000>; + reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j293.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + touchscreen-inverted-y; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi index 9b0dad6b618444ac6b1c9735c50cccfc3965f947..9b83341a799d9a37578e5461e6b184f81ee7435c 100644 --- a/arch/arm64/boot/dts/apple/t8103.dtsi +++ b/arch/arm64/boot/dts/apple/t8103.dtsi @@ -326,6 +326,13 @@ clkref: clock-ref { clock-output-names = "clkref"; }; + clk_200m: clock-200m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "clk_200m"; + }; + /* * This is a fabulated representation of the input clock * to NCO since we don't know the true clock tree. @@ -441,6 +448,19 @@ fpwm1: pwm@235044000 { status = "disabled"; }; + spi0: spi@235100000 { + compatible = "apple,t8103-spi", "apple,spi"; + reg = <0x2 0x35100000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = ; + cs-gpios = <&pinctrl_ap 109 GPIO_ACTIVE_LOW>; + clocks = <&clk_200m>; + power-domains = <&ps_spi0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; /* only used in J293 */ + }; + serial0: serial@235200000 { compatible = "apple,s5l-uart"; reg = <0x2 0x35200000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts index 0ad908349f55406783942735a2e9dad54cda00ec..3332cc87cdf1a418c4c2247639baf5d2a42ed3c2 100644 --- a/arch/arm64/boot/dts/apple/t8112-j493.dts +++ b/arch/arm64/boot/dts/apple/t8112-j493.dts @@ -17,8 +17,13 @@ / { compatible = "apple,j493", "apple,t8112", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M2, 2022)"; + /* + * All of those are used by the bootloader to pass calibration + * blobs and other device-specific properties + */ aliases { bluetooth0 = &bluetooth0; + touchbar0 = &touchbar0; wifi0 = &wifi0; }; @@ -67,3 +72,22 @@ &i2c4 { &fpwm1 { status = "okay"; }; + +&spi3 { + status = "okay"; + + touchbar0: touchbar@0 { + compatible = "apple,j493-touchbar"; + reg = <0>; + spi-max-frequency = <8000000>; + spi-cs-setup-delay-ns = <2000>; + spi-cs-hold-delay-ns = <2000>; + + reset-gpios = <&pinctrl_ap 170 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 174 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j493.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + touchscreen-inverted-y; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi index 1666e6ab250bc0be9b8318e3c8fc903ccd3f3760..977c1ca5e8c1b566bb3876b6619ea8812b98e072 100644 --- a/arch/arm64/boot/dts/apple/t8112.dtsi +++ b/arch/arm64/boot/dts/apple/t8112.dtsi @@ -467,6 +467,20 @@ fpwm1: pwm@235044000 { status = "disabled"; }; + spi3: spi@23510c000 { + compatible = "apple,t8112-spi", "apple,spi"; + reg = <0x2 0x3510c000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = ; + clocks = <&clkref>; + pinctrl-0 = <&spi3_pins>; + pinctrl-names = "default"; + power-domains = <&ps_spi3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + serial0: serial@235200000 { compatible = "apple,s5l-uart"; reg = <0x2 0x35200000 0x0 0x1000>;