diff mbox series

docs: hid: Fix typo in intel-thc-hid.rst

Message ID 20250330084518.20916-1-noralin249@gmail.com (mailing list archive)
State New
Headers show
Series docs: hid: Fix typo in intel-thc-hid.rst | expand

Commit Message

Chih Yun Lin March 30, 2025, 8:45 a.m. UTC 
Corrected the spelling of "triggerred" to "triggered" and "flexiblity"
to "flexibility".

Signed-off-by: Chih Yun Lin <noralin249@gmail.com>
---
 Documentation/hid/intel-thc-hid.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/hid/intel-thc-hid.rst b/Documentation/hid/intel-thc-hid.rst
index 6c417205ac6a..dc9250787fc5 100644
--- a/Documentation/hid/intel-thc-hid.rst
+++ b/Documentation/hid/intel-thc-hid.rst
@@ -182,7 +182,7 @@  value and use PIO write (by setting SubIP write opcode) to do a write operation.
 
 THC also includes two GPIO pins, one for interrupt and the other for device reset control.
 
-Interrupt line can be configured to either level triggerred or edge triggerred by setting MMIO
+Interrupt line can be configured to either level triggered or edge triggered by setting MMIO
 Control register.
 
 Reset line is controlled by BIOS (or EFI) through ACPI _RST method, driver needs to call this
@@ -302,10 +302,10 @@  waiting for interrupt ready then read out the data from system memory.
 3.3.2 Software DMA channel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-THC supports a software triggerred RxDMA mode to read the touch data from touch IC. This SW RxDMA
+THC supports a software triggered RxDMA mode to read the touch data from touch IC. This SW RxDMA
 is the 3rd THC RxDMA engine with the similar functionalities as the existing two RxDMAs, the only
-difference is this SW RxDMA is triggerred by software, and RxDMA2 is triggerred by external Touch IC
-interrupt. It gives a flexiblity to software driver to use RxDMA read Touch IC data in any time.
+difference is this SW RxDMA is triggered by software, and RxDMA2 is triggered by external Touch IC
+interrupt. It gives a flexibility to software driver to use RxDMA read Touch IC data in any time.
 
 Before software starts a SW RxDMA, it shall stop the 1st and 2nd RxDMA, clear PRD read/write pointer
 and quiesce the device interrupt (THC_DEVINT_QUIESCE_HW_STS = 1), other operations are the same with