diff mbox

[6/6] elantech: remove support for proprietary X driver

Message ID 4DCE263F.80905@tudelft.nl (mailing list archive)
State Accepted
Commit 9cb6cfae4e792d9f92612dd57ee1e3ff218f17a6
Headers show

Commit Message

Éric Piel May 14, 2011, 6:50 a.m. UTC
Apparently somewhere someone had a proprietary X driver. To get the
multitouch info, it uses some hack on the normal API instead of using
the multitouch protocol. Now that the multitouch info is transmitted
correctly it makes not much sense to keep it. Especially because it's
impossible to find this proprietary X driver anywhere, so the number of
users must be very low.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
---
 drivers/input/mouse/elantech.c |   12 ------------
 1 files changed, 0 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index a05d092..5bfe508 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -327,14 +327,6 @@  static void elantech_report_absolute_v2(struct psmouse *psmouse)
 		 */
 		input_report_abs(dev, ABS_X, x1 << 2);
 		input_report_abs(dev, ABS_Y, y1 << 2);
-		/*
-		 * For compatibility with the proprietary X Elantech driver
-		 * report both coordinates as hat coordinates
-		 */
-		input_report_abs(dev, ABS_HAT0X, x1);
-		input_report_abs(dev, ABS_HAT0Y, y1);
-		input_report_abs(dev, ABS_HAT1X, x2);
-		input_report_abs(dev, ABS_HAT1Y, y2);
 
 		/* Unknown so just report sensible values */
 		pres = 127;
@@ -574,10 +566,6 @@  static void elantech_set_input_params(struct psmouse *psmouse)
 		input_mt_init_slots(dev, 2);
 		input_set_abs_params(dev, ABS_MT_POSITION_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
 		input_set_abs_params(dev, ABS_MT_POSITION_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
-		input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);
-		input_set_abs_params(dev, ABS_HAT0Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0);
-		input_set_abs_params(dev, ABS_HAT1X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);
-		input_set_abs_params(dev, ABS_HAT1Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0);
 		break;
 	}
 }