diff -durpN linux-4.2.6/drivers/input/touchscreen/egalax.c linux-4.2.6.egalax-serio/drivers/input/touchscreen/egalax.c
--- linux-4.2.6/drivers/input/touchscreen/egalax.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-4.2.6.egalax-serio/drivers/input/touchscreen/egalax.c	2015-12-14 09:56:28.456074915 +0100
@@ -0,0 +1,210 @@
+/*
+ * EETI Egalax serial touchscreen driver
+ *
+ * Copyright (c) 2015 Zoltán Böszörményi <zboszor@pr.hu>
+ *
+ * based on the
+ *
+ * Hampshire serial touchscreen driver (Copyright (c) 2010 Adam Bennett)
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"EETI Egalax serial touchscreen driver"
+
+MODULE_AUTHOR("Zoltán Böszörményi <zboszor@pr.hu>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define EGALAX_FORMAT_MAX_LENGTH 6
+#define EGALAX_RESPONSE_BEGIN_BYTE 0x80
+#define EGALAX_FORMAT_PRESSURE_BIT 0x40
+#define EGALAX_FORMAT_TOUCH_BIT 0x01
+#define EGALAX_FORMAT_RESOLUTION 0x06
+
+#define EGALAX_MIN_XC 0
+#define EGALAX_MAX_XC 0x4000
+#define EGALAX_MIN_YC 0
+#define EGALAX_MAX_YC 0x4000
+
+#define EGALAX_GET_XC(data, resbits, shift) ((((data[1] & (resbits)) << 7) | (data[2] & 0x7f)) << shift)
+#define EGALAX_GET_YC(data, resbits, shift) ((((data[3] & (resbits)) << 7) | (data[4] & 0x7f)) << shift)
+#define EGALAX_GET_TOUCHED(data) (EGALAX_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct egalax {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	int bytes;
+	int resbits;
+	int shift;
+	unsigned char data[EGALAX_FORMAT_MAX_LENGTH];
+	char phys[32];
+};
+
+static void egalax_process_data(struct egalax *pegalax)
+{
+	struct input_dev *dev = pegalax->dev;
+
+	if (++pegalax->idx == pegalax->bytes) {
+		input_report_abs(dev, ABS_X, EGALAX_GET_XC(pegalax->data, pegalax->resbits, pegalax->shift));
+		input_report_abs(dev, ABS_Y, EGALAX_GET_YC(pegalax->data, pegalax->resbits, pegalax->shift));
+		input_report_key(dev, BTN_TOUCH, EGALAX_GET_TOUCHED(pegalax->data));
+		input_sync(dev);
+
+		pegalax->idx = 0;
+	}
+}
+
+static irqreturn_t egalax_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct egalax *pegalax = serio_get_drvdata(serio);
+
+	pegalax->data[pegalax->idx] = data;
+
+	if (EGALAX_RESPONSE_BEGIN_BYTE & pegalax->data[0]) {
+		pegalax->bytes = (EGALAX_FORMAT_PRESSURE_BIT & pegalax->data[0] ? 6 : 5);
+		switch ((EGALAX_FORMAT_RESOLUTION & pegalax->data[0]) >> 1) {
+		case 0:
+			pegalax->resbits = 0x0f;
+			pegalax->shift = 3;
+			break;
+		case 1:
+			pegalax->resbits = 0x1f;
+			pegalax->shift = 2;
+			break;
+		case 2:
+			pegalax->resbits = 0x3f;
+			pegalax->shift = 1;
+			break;
+		default:
+			pegalax->resbits = 0x7f;
+			pegalax->shift = 0;
+			break;
+		}
+		egalax_process_data(pegalax);
+	}
+	else
+		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+			pegalax->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+static void egalax_disconnect(struct serio *serio)
+{
+	struct egalax *pegalax = serio_get_drvdata(serio);
+
+	input_get_device(pegalax->dev);
+	input_unregister_device(pegalax->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(pegalax->dev);
+	kfree(pegalax);
+}
+
+/*
+ * egalax_connect() is the routine that is called when someone adds a
+ * new serio device that supports egalax protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int egalax_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct egalax *pegalax;
+	struct input_dev *input_dev;
+	int err;
+
+	pegalax = kzalloc(sizeof(struct egalax), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pegalax || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	pegalax->serio = serio;
+	pegalax->dev = input_dev;
+	snprintf(pegalax->phys, sizeof(pegalax->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "EETI eGalaxTouch Serial TouchScreen";
+	input_dev->phys = pegalax->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_EGALAX;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(pegalax->dev, ABS_X,
+			     EGALAX_MIN_XC, EGALAX_MAX_XC, 0, 0);
+	input_set_abs_params(pegalax->dev, ABS_Y,
+			     EGALAX_MIN_YC, EGALAX_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, pegalax);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(pegalax->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(pegalax);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id egalax_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_EGALAX,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, egalax_serio_ids);
+
+static struct serio_driver egalax_drv = {
+	.driver		= {
+		.name	= "egalax",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= egalax_serio_ids,
+	.interrupt	= egalax_interrupt,
+	.connect	= egalax_connect,
+	.disconnect	= egalax_disconnect,
+};
+
+module_serio_driver(egalax_drv);
diff -durpN linux-4.2.6/drivers/input/touchscreen/Kconfig linux-4.2.6.egalax-serio/drivers/input/touchscreen/Kconfig
--- linux-4.2.6/drivers/input/touchscreen/Kconfig	2015-11-09 23:37:56.000000000 +0100
+++ linux-4.2.6.egalax-serio/drivers/input/touchscreen/Kconfig	2015-12-14 09:58:46.363311141 +0100
@@ -295,6 +295,16 @@ config TOUCHSCREEN_EGALAX
 	  To compile this driver as a module, choose M here: the
 	  module will be called egalax_ts.
 
+config TOUCHSCREEN_EGALAX_SERIO
+	tristate "EETI eGalax serial touchscreen"
+	select SERIO
+	help
+	  Say Y here to enable support for serial connected EETI
+	  eGalax touch panels.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called egalax.
+
 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
 	select SERIO
diff -durpN linux-4.2.6/drivers/input/touchscreen/Makefile linux-4.2.6.egalax-serio/drivers/input/touchscreen/Makefile
--- linux-4.2.6/drivers/input/touchscreen/Makefile	2015-11-09 23:37:56.000000000 +0100
+++ linux-4.2.6.egalax-serio/drivers/input/touchscreen/Makefile	2015-12-14 09:59:26.113667470 +0100
@@ -35,6 +35,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_
 obj-$(CONFIG_TOUCHSCREEN_ELAN)		+= elants_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_EGALAX)	+= egalax_ts.o
+obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIO)	+= egalax.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
diff -durpN linux-4.2.6/include/uapi/linux/serio.h linux-4.2.6.egalax-serio/include/uapi/linux/serio.h
--- linux-4.2.6/include/uapi/linux/serio.h	2015-11-09 23:37:56.000000000 +0100
+++ linux-4.2.6.egalax-serio/include/uapi/linux/serio.h	2015-12-14 09:21:39.868415166 +0100
@@ -77,5 +77,6 @@
 #define SERIO_PS2MULT	0x3c
 #define SERIO_TSC40	0x3d
 #define SERIO_WACOM_IV	0x3e
+#define SERIO_EGALAX	0x3f
 
 #endif /* _UAPI_SERIO_H */
