@@ -791,10 +791,10 @@ config INPUT_IQS626A
module will be called iqs626a.
config INPUT_IQS7222
- tristate "Azoteq IQS7222A/B/C capacitive touch controller"
+ tristate "Azoteq IQS7222A/B/C/D capacitive touch controller"
depends on I2C
help
- Say Y to enable support for the Azoteq IQS7222A/B/C family
+ Say Y to enable support for the Azoteq IQS7222A/B/C/D family
of capacitive touch controllers.
To compile this driver as a module, choose M here: the
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Azoteq IQS7222A/B/C Capacitive Touch Controller
+ * Azoteq IQS7222A/B/C/D Capacitive Touch Controller
*
* Copyright (C) 2022 Jeff LaBundy <jeff@labundy.com>
*/
@@ -12,6 +12,7 @@
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/input.h>
+#include <linux/input/touchscreen.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
@@ -25,6 +26,7 @@
#define IQS7222_PROD_NUM_A 840
#define IQS7222_PROD_NUM_B 698
#define IQS7222_PROD_NUM_C 863
+#define IQS7222_PROD_NUM_D 1046
#define IQS7222_SYS_STATUS 0x10
#define IQS7222_SYS_STATUS_RESET BIT(3)
@@ -54,6 +56,7 @@
#define IQS7222_EVENT_MASK_ATI BIT(12)
#define IQS7222_EVENT_MASK_SLDR BIT(10)
+#define IQS7222_EVENT_MASK_TPAD IQS7222_EVENT_MASK_SLDR
#define IQS7222_EVENT_MASK_TOUCH BIT(1)
#define IQS7222_EVENT_MASK_PROX BIT(0)
@@ -71,6 +74,7 @@
#define IQS7222_MAX_COLS_CHAN 6
#define IQS7222_MAX_COLS_FILT 2
#define IQS7222_MAX_COLS_SLDR 11
+#define IQS7222_MAX_COLS_TPAD 24
#define IQS7222_MAX_COLS_GPIO 3
#define IQS7222_MAX_COLS_SYS 13
@@ -102,16 +106,18 @@ enum iqs7222_reg_grp_id {
IQS7222_REG_GRP_BTN,
IQS7222_REG_GRP_CHAN,
IQS7222_REG_GRP_SLDR,
+ IQS7222_REG_GRP_TPAD,
IQS7222_REG_GRP_GPIO,
IQS7222_REG_GRP_SYS,
IQS7222_NUM_REG_GRPS
};
static const char * const iqs7222_reg_grp_names[IQS7222_NUM_REG_GRPS] = {
- [IQS7222_REG_GRP_CYCLE] = "cycle",
- [IQS7222_REG_GRP_CHAN] = "channel",
- [IQS7222_REG_GRP_SLDR] = "slider",
- [IQS7222_REG_GRP_GPIO] = "gpio",
+ [IQS7222_REG_GRP_CYCLE] = "cycle-%d",
+ [IQS7222_REG_GRP_CHAN] = "channel-%d",
+ [IQS7222_REG_GRP_SLDR] = "slider-%d",
+ [IQS7222_REG_GRP_TPAD] = "trackpad",
+ [IQS7222_REG_GRP_GPIO] = "gpio-%d",
};
static const unsigned int iqs7222_max_cols[IQS7222_NUM_REG_GRPS] = {
@@ -122,6 +128,7 @@ static const unsigned int iqs7222_max_cols[IQS7222_NUM_REG_GRPS] = {
[IQS7222_REG_GRP_CHAN] = IQS7222_MAX_COLS_CHAN,
[IQS7222_REG_GRP_FILT] = IQS7222_MAX_COLS_FILT,
[IQS7222_REG_GRP_SLDR] = IQS7222_MAX_COLS_SLDR,
+ [IQS7222_REG_GRP_TPAD] = IQS7222_MAX_COLS_TPAD,
[IQS7222_REG_GRP_GPIO] = IQS7222_MAX_COLS_GPIO,
[IQS7222_REG_GRP_SYS] = IQS7222_MAX_COLS_SYS,
};
@@ -130,8 +137,10 @@ static const unsigned int iqs7222_gpio_links[] = { 2, 5, 6, };
struct iqs7222_event_desc {
const char *name;
+ u16 link;
u16 mask;
u16 val;
+ u16 strict;
u16 enable;
enum iqs7222_reg_key_id reg_key;
};
@@ -188,6 +197,93 @@ static const struct iqs7222_event_desc iqs7222_sl_events[] = {
},
};
+static const struct iqs7222_event_desc iqs7222_tp_events[] = {
+ {
+ .name = "event-press",
+ .link = BIT(7),
+ },
+ {
+ .name = "event-tap",
+ .link = BIT(0),
+ .mask = BIT(0),
+ .val = BIT(0),
+ .enable = BIT(0),
+ .reg_key = IQS7222_REG_KEY_TAP,
+ },
+ {
+ .name = "event-swipe-x-pos",
+ .link = BIT(2),
+ .mask = BIT(2) | BIT(1),
+ .val = BIT(2),
+ .strict = BIT(4),
+ .enable = BIT(1),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-swipe-y-pos",
+ .link = BIT(3),
+ .mask = BIT(3) | BIT(1),
+ .val = BIT(3),
+ .strict = BIT(3),
+ .enable = BIT(1),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-swipe-x-neg",
+ .link = BIT(4),
+ .mask = BIT(4) | BIT(1),
+ .val = BIT(4),
+ .strict = BIT(4),
+ .enable = BIT(1),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-swipe-y-neg",
+ .link = BIT(5),
+ .mask = BIT(5) | BIT(1),
+ .val = BIT(5),
+ .strict = BIT(3),
+ .enable = BIT(1),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-flick-x-pos",
+ .link = BIT(2),
+ .mask = BIT(2) | BIT(1),
+ .val = BIT(2) | BIT(1),
+ .strict = BIT(4),
+ .enable = BIT(2),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-flick-y-pos",
+ .link = BIT(3),
+ .mask = BIT(3) | BIT(1),
+ .val = BIT(3) | BIT(1),
+ .strict = BIT(3),
+ .enable = BIT(2),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-flick-x-neg",
+ .link = BIT(4),
+ .mask = BIT(4) | BIT(1),
+ .val = BIT(4) | BIT(1),
+ .strict = BIT(4),
+ .enable = BIT(2),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-flick-y-neg",
+ .link = BIT(5),
+ .mask = BIT(5) | BIT(1),
+ .val = BIT(5) | BIT(1),
+ .strict = BIT(3),
+ .enable = BIT(2),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+};
+
struct iqs7222_reg_grp_desc {
u16 base;
int num_row;
@@ -524,6 +620,62 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = {
},
},
},
+ {
+ .prod_num = IQS7222_PROD_NUM_D,
+ .fw_major = 0,
+ .fw_minor = 37,
+ .touch_link = 1770,
+ .allow_offset = 9,
+ .event_offset = 10,
+ .comms_offset = 11,
+ .reg_grps = {
+ [IQS7222_REG_GRP_STAT] = {
+ .base = IQS7222_SYS_STATUS,
+ .num_row = 1,
+ .num_col = 7,
+ },
+ [IQS7222_REG_GRP_CYCLE] = {
+ .base = 0x8000,
+ .num_row = 7,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_GLBL] = {
+ .base = 0x8700,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_BTN] = {
+ .base = 0x9000,
+ .num_row = 14,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_CHAN] = {
+ .base = 0xA000,
+ .num_row = 14,
+ .num_col = 4,
+ },
+ [IQS7222_REG_GRP_FILT] = {
+ .base = 0xAE00,
+ .num_row = 1,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_TPAD] = {
+ .base = 0xB000,
+ .num_row = 1,
+ .num_col = 24,
+ },
+ [IQS7222_REG_GRP_GPIO] = {
+ .base = 0xC000,
+ .num_row = 3,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_SYS] = {
+ .base = IQS7222_SYS_SETUP,
+ .num_row = 1,
+ .num_col = 12,
+ },
+ },
+ },
};
struct iqs7222_prop_desc {
@@ -1008,6 +1160,123 @@ static const struct iqs7222_prop_desc iqs7222_props[] = {
.val_pitch = 4,
.label = "maximum gesture time",
},
+ {
+ .name = "azoteq,num-rows",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_offset = 0,
+ .reg_shift = 4,
+ .reg_width = 4,
+ .val_min = 1,
+ .val_max = 12,
+ .label = "number of rows",
+ },
+ {
+ .name = "azoteq,num-cols",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_offset = 0,
+ .reg_shift = 0,
+ .reg_width = 4,
+ .val_min = 1,
+ .val_max = 12,
+ .label = "number of columns",
+ },
+ {
+ .name = "azoteq,lower-cal-y",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_offset = 1,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .label = "lower vertical calibration",
+ },
+ {
+ .name = "azoteq,lower-cal-x",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_offset = 1,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .label = "lower horizontal calibration",
+ },
+ {
+ .name = "azoteq,upper-cal-y",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_offset = 2,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .label = "upper vertical calibration",
+ },
+ {
+ .name = "azoteq,upper-cal-x",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_offset = 2,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .label = "upper horizontal calibration",
+ },
+ {
+ .name = "azoteq,top-speed",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_offset = 3,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 4,
+ .label = "top speed",
+ },
+ {
+ .name = "azoteq,bottom-speed",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_offset = 3,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .label = "bottom speed",
+ },
+ {
+ .name = "azoteq,gesture-min-ms",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_key = IQS7222_REG_KEY_TAP,
+ .reg_offset = 20,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 16,
+ .label = "minimum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-max-ms",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ .reg_offset = 21,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 16,
+ .label = "maximum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-max-ms",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_key = IQS7222_REG_KEY_TAP,
+ .reg_offset = 21,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .val_pitch = 16,
+ .label = "maximum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-dist",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_key = IQS7222_REG_KEY_TAP,
+ .reg_offset = 22,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .label = "gesture distance",
+ },
+ {
+ .name = "azoteq,gesture-dist",
+ .reg_grp = IQS7222_REG_GRP_TPAD,
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ .reg_offset = 23,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .label = "gesture distance",
+ },
{
.name = "drive-open-drain",
.reg_grp = IQS7222_REG_GRP_GPIO,
@@ -1091,16 +1360,19 @@ struct iqs7222_private {
struct gpio_desc *irq_gpio;
struct i2c_client *client;
struct input_dev *keypad;
+ struct touchscreen_properties prop;
unsigned int kp_type[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)];
unsigned int kp_code[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)];
unsigned int sl_code[IQS7222_MAX_SLDR][ARRAY_SIZE(iqs7222_sl_events)];
unsigned int sl_axis[IQS7222_MAX_SLDR];
+ unsigned int tp_code[ARRAY_SIZE(iqs7222_tp_events)];
u16 cycle_setup[IQS7222_MAX_CHAN / 2][IQS7222_MAX_COLS_CYCLE];
u16 glbl_setup[IQS7222_MAX_COLS_GLBL];
u16 btn_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_BTN];
u16 chan_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_CHAN];
u16 filt_setup[IQS7222_MAX_COLS_FILT];
u16 sldr_setup[IQS7222_MAX_SLDR][IQS7222_MAX_COLS_SLDR];
+ u16 tpad_setup[IQS7222_MAX_COLS_TPAD];
u16 gpio_setup[ARRAY_SIZE(iqs7222_gpio_links)][IQS7222_MAX_COLS_GPIO];
u16 sys_setup[IQS7222_MAX_COLS_SYS];
};
@@ -1127,6 +1399,9 @@ static u16 *iqs7222_setup(struct iqs7222_private *iqs7222,
case IQS7222_REG_GRP_SLDR:
return iqs7222->sldr_setup[row];
+ case IQS7222_REG_GRP_TPAD:
+ return iqs7222->tpad_setup;
+
case IQS7222_REG_GRP_GPIO:
return iqs7222->gpio_setup[row];
@@ -1936,6 +2211,14 @@ static int iqs7222_parse_chan(struct iqs7222_private *iqs7222,
ref_setup[4] = dev_desc->touch_link;
if (fwnode_property_present(chan_node, "azoteq,use-prox"))
ref_setup[4] -= 2;
+ } else if (dev_desc->reg_grps[IQS7222_REG_GRP_TPAD].num_row &&
+ fwnode_property_present(chan_node,
+ "azoteq,counts-filt-enable")) {
+ /*
+ * In the case of IQS7222D, however, the reference mode field
+ * is partially repurposed as a counts filter enable control.
+ */
+ chan_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_REF;
}
if (fwnode_property_present(chan_node, "azoteq,rx-enable")) {
@@ -2278,6 +2561,136 @@ static int iqs7222_parse_sldr(struct iqs7222_private *iqs7222,
IQS7222_REG_KEY_NO_WHEEL);
}
+static int iqs7222_parse_tpad(struct iqs7222_private *iqs7222,
+ struct fwnode_handle *tpad_node, int tpad_index)
+{
+ const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
+ struct touchscreen_properties *prop = &iqs7222->prop;
+ struct i2c_client *client = iqs7222->client;
+ int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row;
+ int count, error, i;
+ u16 *event_mask = &iqs7222->sys_setup[dev_desc->event_offset];
+ u16 *tpad_setup = iqs7222->tpad_setup;
+ unsigned int chan_sel[12], val;
+
+ error = iqs7222_parse_props(iqs7222, tpad_node, tpad_index,
+ IQS7222_REG_GRP_TPAD,
+ IQS7222_REG_KEY_NONE);
+ if (error)
+ return error;
+
+ count = fwnode_property_count_u32(tpad_node, "azoteq,channel-select");
+ if (count < 0) {
+ dev_err(&client->dev, "Failed to count %s channels: %d\n",
+ fwnode_get_name(tpad_node), count);
+ return count;
+ } else if (!count || count > ARRAY_SIZE(chan_sel)) {
+ dev_err(&client->dev, "Invalid number of %s channels\n",
+ fwnode_get_name(tpad_node));
+ return -EINVAL;
+ }
+
+ error = fwnode_property_read_u32_array(tpad_node,
+ "azoteq,channel-select",
+ chan_sel, count);
+ if (error) {
+ dev_err(&client->dev, "Failed to read %s channels: %d\n",
+ fwnode_get_name(tpad_node), error);
+ return error;
+ }
+
+ tpad_setup[6] &= ~GENMASK(num_chan - 1, 0);
+
+ for (i = 0; i < ARRAY_SIZE(chan_sel); i++) {
+ tpad_setup[8 + i] = 0;
+ if (i >= count || chan_sel[i] == U8_MAX)
+ continue;
+
+ if (chan_sel[i] >= num_chan) {
+ dev_err(&client->dev, "Invalid %s channel: %u\n",
+ fwnode_get_name(tpad_node), chan_sel[i]);
+ return -EINVAL;
+ }
+
+ /*
+ * The following fields indicate which channels participate in
+ * the trackpad, as well as each channel's relative placement.
+ */
+ tpad_setup[6] |= BIT(chan_sel[i]);
+ tpad_setup[8 + i] = chan_sel[i] * 34 + 1072;
+ }
+
+ tpad_setup[7] = dev_desc->touch_link;
+ if (fwnode_property_present(tpad_node, "azoteq,use-prox"))
+ tpad_setup[7] -= 2;
+
+ for (i = 0; i < ARRAY_SIZE(iqs7222_tp_events); i++)
+ tpad_setup[20] &= ~(iqs7222_tp_events[i].strict |
+ iqs7222_tp_events[i].enable);
+
+ for (i = 0; i < ARRAY_SIZE(iqs7222_tp_events); i++) {
+ const char *event_name = iqs7222_tp_events[i].name;
+ struct fwnode_handle *event_node;
+
+ event_node = fwnode_get_named_child_node(tpad_node, event_name);
+ if (!event_node)
+ continue;
+
+ if (fwnode_property_present(event_node,
+ "azoteq,gesture-angle-tighten"))
+ tpad_setup[20] |= iqs7222_tp_events[i].strict;
+
+ tpad_setup[20] |= iqs7222_tp_events[i].enable;
+
+ error = iqs7222_parse_event(iqs7222, event_node, tpad_index,
+ IQS7222_REG_GRP_TPAD,
+ iqs7222_tp_events[i].reg_key,
+ iqs7222_tp_events[i].link, 1566,
+ NULL,
+ &iqs7222->tp_code[i]);
+ fwnode_handle_put(event_node);
+ if (error)
+ return error;
+
+ if (!dev_desc->event_offset)
+ continue;
+
+ /*
+ * The press/release event is determined based on whether the
+ * coordinate fields report 0xFFFF and solely relies on touch
+ * or proximity interrupts to be unmasked.
+ */
+ if (i)
+ *event_mask |= IQS7222_EVENT_MASK_TPAD;
+ else if (tpad_setup[7] == dev_desc->touch_link)
+ *event_mask |= IQS7222_EVENT_MASK_TOUCH;
+ else
+ *event_mask |= IQS7222_EVENT_MASK_PROX;
+ }
+
+ if (!iqs7222->tp_code[0])
+ return 0;
+
+ input_set_abs_params(iqs7222->keypad, ABS_X,
+ 0, (tpad_setup[4] ? : 1) - 1, 0, 0);
+
+ input_set_abs_params(iqs7222->keypad, ABS_Y,
+ 0, (tpad_setup[5] ? : 1) - 1, 0, 0);
+
+ touchscreen_parse_properties(iqs7222->keypad, false, prop);
+
+ if (prop->max_x >= U16_MAX || prop->max_y >= U16_MAX) {
+ dev_err(&client->dev, "Invalid trackpad size: %u*%u\n",
+ prop->max_x, prop->max_y);
+ return -EINVAL;
+ }
+
+ tpad_setup[4] = prop->max_x + 1;
+ tpad_setup[5] = prop->max_y + 1;
+
+ return 0;
+}
+
static int (*iqs7222_parse_extra[IQS7222_NUM_REG_GRPS])
(struct iqs7222_private *iqs7222,
struct fwnode_handle *reg_grp_node,
@@ -2285,6 +2698,7 @@ static int (*iqs7222_parse_extra[IQS7222_NUM_REG_GRPS])
[IQS7222_REG_GRP_CYCLE] = iqs7222_parse_cycle,
[IQS7222_REG_GRP_CHAN] = iqs7222_parse_chan,
[IQS7222_REG_GRP_SLDR] = iqs7222_parse_sldr,
+ [IQS7222_REG_GRP_TPAD] = iqs7222_parse_tpad,
};
static int iqs7222_parse_reg_grp(struct iqs7222_private *iqs7222,
@@ -2298,7 +2712,7 @@ static int iqs7222_parse_reg_grp(struct iqs7222_private *iqs7222,
if (iqs7222_reg_grp_names[reg_grp]) {
char reg_grp_name[16];
- snprintf(reg_grp_name, sizeof(reg_grp_name), "%s-%d",
+ snprintf(reg_grp_name, sizeof(reg_grp_name),
iqs7222_reg_grp_names[reg_grp], reg_grp_index);
reg_grp_node = device_get_named_child_node(&client->dev,
@@ -2346,8 +2760,8 @@ static int iqs7222_parse_all(struct iqs7222_private *iqs7222)
continue;
/*
- * The IQS7222C exposes multiple GPIO and must be informed
- * as to which GPIO this group represents.
+ * The IQS7222C and IQS7222D expose multiple GPIO and must be
+ * informed as to which GPIO this group represents.
*/
for (j = 0; j < ARRAY_SIZE(iqs7222_gpio_links); j++)
gpio_setup[0] &= ~BIT(iqs7222_gpio_links[j]);
@@ -2480,6 +2894,41 @@ static int iqs7222_report(struct iqs7222_private *iqs7222)
iqs7222->sl_code[i][j], 0);
}
+ for (i = 0; i < dev_desc->reg_grps[IQS7222_REG_GRP_TPAD].num_row; i++) {
+ u16 tpad_pos_x = le16_to_cpu(status[4]);
+ u16 tpad_pos_y = le16_to_cpu(status[5]);
+ u16 state = le16_to_cpu(status[6]);
+
+ input_report_key(iqs7222->keypad, iqs7222->tp_code[0],
+ tpad_pos_x < U16_MAX);
+
+ if (tpad_pos_x < U16_MAX)
+ touchscreen_report_pos(iqs7222->keypad, &iqs7222->prop,
+ tpad_pos_x, tpad_pos_y, false);
+
+ if (!(le16_to_cpu(status[1]) & IQS7222_EVENT_MASK_TPAD))
+ continue;
+
+ /*
+ * Skip the press/release event, as it does not have separate
+ * status fields and is handled separately.
+ */
+ for (j = 1; j < ARRAY_SIZE(iqs7222_tp_events); j++) {
+ u16 mask = iqs7222_tp_events[j].mask;
+ u16 val = iqs7222_tp_events[j].val;
+
+ input_report_key(iqs7222->keypad,
+ iqs7222->tp_code[j],
+ (state & mask) == val);
+ }
+
+ input_sync(iqs7222->keypad);
+
+ for (j = 1; j < ARRAY_SIZE(iqs7222_tp_events); j++)
+ input_report_key(iqs7222->keypad,
+ iqs7222->tp_code[j], 0);
+ }
+
input_sync(iqs7222->keypad);
return 0;
@@ -2584,6 +3033,7 @@ static const struct of_device_id iqs7222_of_match[] = {
{ .compatible = "azoteq,iqs7222a" },
{ .compatible = "azoteq,iqs7222b" },
{ .compatible = "azoteq,iqs7222c" },
+ { .compatible = "azoteq,iqs7222d" },
{ }
};
MODULE_DEVICE_TABLE(of, iqs7222_of_match);
@@ -2598,5 +3048,5 @@ static struct i2c_driver iqs7222_i2c_driver = {
module_i2c_driver(iqs7222_i2c_driver);
MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
-MODULE_DESCRIPTION("Azoteq IQS7222A/B/C Capacitive Touch Controller");
+MODULE_DESCRIPTION("Azoteq IQS7222A/B/C/D Capacitive Touch Controller");
MODULE_LICENSE("GPL");
The vendor has introduced a new variant of silicon which is highly similar to the existing IQS7222A, but with its independent sliders essentially replaced with a single-contact trackpad. Update the common driver to support this new device's register map and report trackpad events. As with the IQS7222A, the new IQS7222D can report both raw coordinates as well as gestures. Signed-off-by: Jeff LaBundy <jeff@labundy.com> --- drivers/input/misc/Kconfig | 4 +- drivers/input/misc/iqs7222.c | 468 ++++++++++++++++++++++++++++++++++- 2 files changed, 461 insertions(+), 11 deletions(-)