From patchwork Fri Aug 16 18:54:23 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Torokhov X-Patchwork-Id: 13766767 Received: from mail-pj1-f48.google.com (mail-pj1-f48.google.com [209.85.216.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9230D2BB0D; Fri, 16 Aug 2024 18:54:27 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.216.48 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723834469; cv=none; b=g1aL+NlV8y/5LlO/pk7y3x3QKLehckTO/MdvV4Vek/BhTx4f9Dy4kaiyneJSjb2BQ5993Hs6whEE++u4H57A8XB6VxUQWKGDahMaq7qjL8T++iEfPQq2AJlPcqq7B9or20cNMzi7Nn6xJrpq2mE90evL8imvKi7QMdnn6xCMNY4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723834469; c=relaxed/simple; bh=kZyatL8yRSqCZH0qgq8BNv7UAoPCfZ/3QVaOyPjL9TA=; h=Date:From:To:Cc:Subject:Message-ID:MIME-Version:Content-Type: Content-Disposition; b=i+LbNonQfG9QvNOPfBe7jBtvew/RflVe+NfPdn1+6zW6oWmnaoZrtNUYII1xBGzT8O/Zw7ceoWhGyWqlJlCr+iDv2nphBjvH3eEzKgQND8GVFTA50fvO8k+ucKCOjYFNq+1RojlMKb/m+fdFbLbRHw9oZHjKV1py7Ismqa6vnpg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=WqBqk5ej; arc=none smtp.client-ip=209.85.216.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="WqBqk5ej" Received: by mail-pj1-f48.google.com with SMTP id 98e67ed59e1d1-2d3d58d6e08so1326265a91.3; Fri, 16 Aug 2024 11:54:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1723834467; x=1724439267; darn=vger.kernel.org; h=content-disposition:mime-version:message-id:subject:cc:to:from:date :from:to:cc:subject:date:message-id:reply-to; bh=7GhfB6wUTmiKLF/4I01krCBvE0ILroVdKujPJwXsm4o=; b=WqBqk5ejEodsNhjMs7y5hzHEqHZ+koKixjlz2wFbsvlD+wiEge/PtMFk/D68uZ9Xwp MZgkBYzgjZl0xMiH+qzP6PC/Tbe4/EFrGRdG+MHP28cAxRMx57dzY7MuKDChVxIyvfMd GuSeAoSIC5pKjJWW2SSaQezvZKEVkVVPXkkbA4HNBzaw9c/7ilj6vW4g/avpAleqskb/ 3kAZ62eZ0MNvAF2HRTrITTULqVxaz1YRe9OLflt0D7hRMIKwb+CKraZyd/qcV4IYE6Z5 BDNs9cYH0/2iL2pUq62PiKMtMQUXjw/iOJ2xJef6OwCyuWikgOptKW6Aed9JzqTvtZhO obgA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1723834467; x=1724439267; h=content-disposition:mime-version:message-id:subject:cc:to:from:date :x-gm-message-state:from:to:cc:subject:date:message-id:reply-to; bh=7GhfB6wUTmiKLF/4I01krCBvE0ILroVdKujPJwXsm4o=; b=J2z2am3ykvu9lCxUW/+Zstjq6pWKzWvECojoXomMASeIVn2NuWSCo9DHvqe6QPHtVU S6f8wtOBu0m8k4JdpfwY7z47eQwSEfv0s2CmftItJnHJSLaT/OUIUmnACVQRLv3wHeIQ Y+OxwP/G0bSwNGZasA3DZLETrLIA3MqQvP5IK+FZe3Qg3M4byvIhMOuzJBnZeNSfK/eA 35rfW3SkKAQPhmlD6XLwGyPnBg5v0D6h6fb6q9wmagR1i+i4z+VmSij3hc84xGiPsJcv v/DDQUAkwddl2oXhKC8DL8CWjNnZjyqyi0XOY2Kp3KWs3ZUM7Og03KETg8Bl71eXLLWl ltCw== X-Forwarded-Encrypted: i=1; AJvYcCW3wiERJYiO8UyLz+ajBzECV873jBIWlurNQTm028VvWu3LVmY7RAvXc4pf0loAAlliZ744krmd5lPpUH10nqrLVGDURxUTxUVr5dGb X-Gm-Message-State: AOJu0YzCjKOQpqiEQGhL7XUtmI7eZiaNwFHs5Q3j5ANJVIpbjdRGZfub 8A11RpCXCcw79oueWtdAEiyTf1i+Rgy1s3vdwz/mxKplvnrxWwS8 X-Google-Smtp-Source: AGHT+IEQMT/1W6Sfam74X0mHS3gvJDrDrON+q1WmXos/35y+V2lH9UOTMZQCYLOlcfTrOA/dQyBYHQ== X-Received: by 2002:a17:90b:4a44:b0:2d1:ba43:1303 with SMTP id 98e67ed59e1d1-2d3dffe297amr4266404a91.21.1723834466395; Fri, 16 Aug 2024 11:54:26 -0700 (PDT) Received: from google.com ([2620:15c:9d:2:f6d5:34f3:964e:7bfc]) by smtp.gmail.com with ESMTPSA id 98e67ed59e1d1-2d3e3c81127sm2243177a91.45.2024.08.16.11.54.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 16 Aug 2024 11:54:25 -0700 (PDT) Date: Fri, 16 Aug 2024 11:54:23 -0700 From: Dmitry Torokhov To: Linus Walleij Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Arnd Bergmann , Lee Jones , linux-arm-kernel@lists.infradead.org Subject: [PATCH] Input: keypad-nomadik-ske - remove the driver Message-ID: Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Disposition: inline The users of this driver were removed in 2013 in commit 28633c54bda6 ("ARM: ux500: Rip out keypad initialisation which is no longer used"). Remove the driver as well. Signed-off-by: Dmitry Torokhov Acked-by: Arnd Bergmann Acked-by: Linus Walleij --- drivers/input/keyboard/Kconfig | 11 - drivers/input/keyboard/Makefile | 1 - drivers/input/keyboard/nomadik-ske-keypad.c | 378 ------------------ .../linux/platform_data/keypad-nomadik-ske.h | 50 --- 4 files changed, 440 deletions(-) diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 72f9552cb571..a5015d6f8bed 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -473,17 +473,6 @@ config KEYBOARD_NEWTON To compile this driver as a module, choose M here: the module will be called newtonkbd. -config KEYBOARD_NOMADIK - tristate "ST-Ericsson Nomadik SKE keyboard" - depends on (ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST) - select INPUT_MATRIXKMAP - help - Say Y here if you want to use a keypad provided on the SKE controller - used on the Ux500 and Nomadik platforms - - To compile this driver as a module, choose M here: the - module will be called nmk-ske-keypad. - config KEYBOARD_NSPIRE tristate "TI-NSPIRE built-in keyboard" depends on ARCH_NSPIRE && OF diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index b8d12a0524e0..3631a9294c6f 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o obj-$(CONFIG_KEYBOARD_MT6779) += mt6779-keypad.o obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o obj-$(CONFIG_KEYBOARD_NSPIRE) += nspire-keypad.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_OMAP4) += omap4-keypad.o diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c deleted file mode 100644 index b3ccc97f61e1..000000000000 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ /dev/null @@ -1,378 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Naveen Kumar G for ST-Ericsson - * Author: Sundar Iyer for ST-Ericsson - * - * Keypad controller driver for the SKE (Scroll Key Encoder) module used in - * the Nomadik 8815 and Ux500 platforms. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* SKE_CR bits */ -#define SKE_KPMLT (0x1 << 6) -#define SKE_KPCN (0x7 << 3) -#define SKE_KPASEN (0x1 << 2) -#define SKE_KPASON (0x1 << 7) - -/* SKE_IMSC bits */ -#define SKE_KPIMA (0x1 << 2) - -/* SKE_ICR bits */ -#define SKE_KPICS (0x1 << 3) -#define SKE_KPICA (0x1 << 2) - -/* SKE_RIS bits */ -#define SKE_KPRISA (0x1 << 2) - -#define SKE_KEYPAD_ROW_SHIFT 3 -#define SKE_KPD_NUM_ROWS 8 -#define SKE_KPD_NUM_COLS 8 - -/* keypad auto scan registers */ -#define SKE_ASR0 0x20 -#define SKE_ASR1 0x24 -#define SKE_ASR2 0x28 -#define SKE_ASR3 0x2C - -#define SKE_NUM_ASRX_REGISTERS (4) -#define KEY_PRESSED_DELAY 10 - -/** - * struct ske_keypad - data structure used by keypad driver - * @irq: irq no - * @reg_base: ske registers base address - * @input: pointer to input device object - * @board: keypad platform device - * @keymap: matrix scan code table for keycodes - * @clk: clock structure pointer - * @pclk: clock structure pointer - * @ske_keypad_lock: spinlock protecting the keypad read/writes - */ -struct ske_keypad { - int irq; - void __iomem *reg_base; - struct input_dev *input; - const struct ske_keypad_platform_data *board; - unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS]; - struct clk *clk; - struct clk *pclk; - spinlock_t ske_keypad_lock; -}; - -static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, - u8 mask, u8 data) -{ - u32 ret; - - spin_lock(&keypad->ske_keypad_lock); - - ret = readl(keypad->reg_base + addr); - ret &= ~mask; - ret |= data; - writel(ret, keypad->reg_base + addr); - - spin_unlock(&keypad->ske_keypad_lock); -} - -/* - * ske_keypad_chip_init: init keypad controller configuration - * - * Enable Multi key press detection, auto scan mode - */ -static int __init ske_keypad_chip_init(struct ske_keypad *keypad) -{ - u32 value; - int timeout = keypad->board->debounce_ms; - - /* check SKE_RIS to be 0 */ - while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--) - cpu_relax(); - - if (timeout == -1) - return -EINVAL; - - /* - * set debounce value - * keypad dbounce is configured in DBCR[15:8] - * dbounce value in steps of 32/32.768 ms - */ - spin_lock(&keypad->ske_keypad_lock); - value = readl(keypad->reg_base + SKE_DBCR); - value = value & 0xff; - value |= ((keypad->board->debounce_ms * 32000)/32768) << 8; - writel(value, keypad->reg_base + SKE_DBCR); - spin_unlock(&keypad->ske_keypad_lock); - - /* enable multi key detection */ - ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT); - - /* - * set up the number of columns - * KPCN[5:3] defines no. of keypad columns to be auto scanned - */ - value = (keypad->board->kcol - 1) << 3; - ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value); - - /* clear keypad interrupt for auto(and pending SW) scans */ - ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS); - - /* un-mask keypad interrupts */ - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - /* enable automatic scan */ - ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN); - - return 0; -} - -static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col) -{ - int row = 0, code, pos; - struct input_dev *input = keypad->input; - u32 ske_ris; - int key_pressed; - int num_of_rows; - - /* find out the row */ - num_of_rows = hweight8(status); - do { - pos = __ffs(status); - row = pos; - status &= ~(1 << pos); - - code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); - ske_ris = readl(keypad->reg_base + SKE_RIS); - key_pressed = ske_ris & SKE_KPRISA; - - input_event(input, EV_MSC, MSC_SCAN, code); - input_report_key(input, keypad->keymap[code], key_pressed); - input_sync(input); - num_of_rows--; - } while (num_of_rows); -} - -static void ske_keypad_read_data(struct ske_keypad *keypad) -{ - u8 status; - int col = 0; - int ske_asr, i; - - /* - * Read the auto scan registers - * - * Each SKE_ASRx (x=0 to x=3) contains two row values. - * lower byte contains row value for column 2*x, - * upper byte contains row value for column 2*x + 1 - */ - for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) { - ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i)); - if (!ske_asr) - continue; - - /* now that ASRx is zero, find out the coloumn x and row y */ - status = ske_asr & 0xff; - if (status) { - col = i * 2; - ske_keypad_report(keypad, status, col); - } - status = (ske_asr & 0xff00) >> 8; - if (status) { - col = (i * 2) + 1; - ske_keypad_report(keypad, status, col); - } - } -} - -static irqreturn_t ske_keypad_irq(int irq, void *dev_id) -{ - struct ske_keypad *keypad = dev_id; - int timeout = keypad->board->debounce_ms; - - /* disable auto scan interrupt; mask the interrupt generated */ - ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); - ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA); - - while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout) - cpu_relax(); - - /* SKEx registers are stable and can be read */ - ske_keypad_read_data(keypad); - - /* wait until raw interrupt is clear */ - while ((readl(keypad->reg_base + SKE_RIS)) && --timeout) - msleep(KEY_PRESSED_DELAY); - - /* enable auto scan interrupts */ - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - return IRQ_HANDLED; -} - -static void ske_keypad_board_exit(void *data) -{ - struct ske_keypad *keypad = data; - - keypad->board->exit(); -} - -static int __init ske_keypad_probe(struct platform_device *pdev) -{ - const struct ske_keypad_platform_data *plat = - dev_get_platdata(&pdev->dev); - struct device *dev = &pdev->dev; - struct ske_keypad *keypad; - struct input_dev *input; - int irq; - int error; - - if (!plat) { - dev_err(&pdev->dev, "invalid keypad platform data\n"); - return -EINVAL; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - keypad = devm_kzalloc(dev, sizeof(struct ske_keypad), - GFP_KERNEL); - input = devm_input_allocate_device(dev); - if (!keypad || !input) { - dev_err(&pdev->dev, "failed to allocate keypad memory\n"); - return -ENOMEM; - } - - keypad->irq = irq; - keypad->board = plat; - keypad->input = input; - spin_lock_init(&keypad->ske_keypad_lock); - - keypad->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(keypad->reg_base)) - return PTR_ERR(keypad->reg_base); - - keypad->pclk = devm_clk_get_enabled(dev, "apb_pclk"); - if (IS_ERR(keypad->pclk)) { - dev_err(&pdev->dev, "failed to get pclk\n"); - return PTR_ERR(keypad->pclk); - } - - keypad->clk = devm_clk_get_enabled(dev, NULL); - if (IS_ERR(keypad->clk)) { - dev_err(&pdev->dev, "failed to get clk\n"); - return PTR_ERR(keypad->clk); - } - - input->id.bustype = BUS_HOST; - input->name = "ux500-ske-keypad"; - input->dev.parent = &pdev->dev; - - error = matrix_keypad_build_keymap(plat->keymap_data, NULL, - SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS, - keypad->keymap, input); - if (error) { - dev_err(&pdev->dev, "Failed to build keymap\n"); - return error; - } - - input_set_capability(input, EV_MSC, MSC_SCAN); - if (!plat->no_autorepeat) - __set_bit(EV_REP, input->evbit); - - /* go through board initialization helpers */ - if (keypad->board->init) - keypad->board->init(); - - if (keypad->board->exit) { - error = devm_add_action_or_reset(dev, ske_keypad_board_exit, - keypad); - if (error) - return error; - } - - error = ske_keypad_chip_init(keypad); - if (error) { - dev_err(&pdev->dev, "unable to init keypad hardware\n"); - return error; - } - - error = devm_request_threaded_irq(dev, keypad->irq, - NULL, ske_keypad_irq, - IRQF_ONESHOT, "ske-keypad", keypad); - if (error) { - dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq); - return error; - } - - error = input_register_device(input); - if (error) { - dev_err(&pdev->dev, - "unable to register input device: %d\n", error); - return error; - } - - if (plat->wakeup_enable) - device_init_wakeup(&pdev->dev, true); - - platform_set_drvdata(pdev, keypad); - - return 0; -} - -static int ske_keypad_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct ske_keypad *keypad = platform_get_drvdata(pdev); - int irq = platform_get_irq(pdev, 0); - - if (device_may_wakeup(dev)) - enable_irq_wake(irq); - else - ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); - - return 0; -} - -static int ske_keypad_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct ske_keypad *keypad = platform_get_drvdata(pdev); - int irq = platform_get_irq(pdev, 0); - - if (device_may_wakeup(dev)) - disable_irq_wake(irq); - else - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - return 0; -} - -static DEFINE_SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops, - ske_keypad_suspend, ske_keypad_resume); - -static struct platform_driver ske_keypad_driver = { - .driver = { - .name = "nmk-ske-keypad", - .pm = pm_sleep_ptr(&ske_keypad_dev_pm_ops), - }, -}; - -module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Naveen Kumar / Sundar Iyer "); -MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver"); -MODULE_ALIAS("platform:nomadik-ske-keypad"); diff --git a/include/linux/platform_data/keypad-nomadik-ske.h b/include/linux/platform_data/keypad-nomadik-ske.h deleted file mode 100644 index 7efabbca1dca..000000000000 --- a/include/linux/platform_data/keypad-nomadik-ske.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Naveen Kumar Gaddipati - * - * ux500 Scroll key and Keypad Encoder (SKE) header - */ - -#ifndef __SKE_H -#define __SKE_H - -#include - -/* register definitions for SKE peripheral */ -#define SKE_CR 0x00 -#define SKE_VAL0 0x04 -#define SKE_VAL1 0x08 -#define SKE_DBCR 0x0C -#define SKE_IMSC 0x10 -#define SKE_RIS 0x14 -#define SKE_MIS 0x18 -#define SKE_ICR 0x1C - -/* - * Keypad module - */ - -/** - * struct keypad_platform_data - structure for platform specific data - * @init: pointer to keypad init function - * @exit: pointer to keypad deinitialisation function - * @keymap_data: matrix scan code table for keycodes - * @krow: maximum number of rows - * @kcol: maximum number of columns - * @debounce_ms: platform specific debounce time - * @no_autorepeat: flag for auto repetition - * @wakeup_enable: allow waking up the system - */ -struct ske_keypad_platform_data { - int (*init)(void); - int (*exit)(void); - const struct matrix_keymap_data *keymap_data; - u8 krow; - u8 kcol; - u8 debounce_ms; - bool no_autorepeat; - bool wakeup_enable; -}; -#endif /*__SKE_KPD_H*/