| Message ID | ZsVKmnjxdnKBLvju@google.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | sh: ecovec24: use static device properties to describe the touchscreen | expand |
Hi Dmitry, On Tue, 2024-08-20 at 19:02 -0700, Dmitry Torokhov wrote: > Convert the board to use static device properties instead of platform > data to describe the touchscreen, so that support for platform data can > be removed from tsc2007 driver (ecovec24 is the last board using this > mechanism of describing tsc2007). > > Device properties do not allow custom board methods, so the method for > getting "pen down" state was removed (the driver is capable of working > without it). If this functionality is needed proper pin control/gpio > support needs to be implemented so that the same pin can serve as an > input GPIO and an interrupt. > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > arch/sh/boards/mach-ecovec24/setup.c | 38 ++++++++-------------------- > 1 file changed, 11 insertions(+), 27 deletions(-) > > diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c > index 6f13557eecd6..4833bec0c3c5 100644 > --- a/arch/sh/boards/mach-ecovec24/setup.c > +++ b/arch/sh/boards/mach-ecovec24/setup.c > @@ -26,6 +26,7 @@ > #include <linux/platform_data/tmio.h> > #include <linux/platform_data/tsc2007.h> > #include <linux/platform_device.h> > +#include <linux/property.h> > #include <linux/regulator/fixed.h> > #include <linux/regulator/machine.h> > #include <linux/sh_eth.h> > @@ -589,39 +590,21 @@ static struct platform_device keysc_device = { > /* TouchScreen */ > #define IRQ0 evt2irq(0x600) > > -static int ts_get_pendown_state(struct device *dev) > -{ > - int val = 0; > - gpio_free(GPIO_FN_INTC_IRQ0); > - gpio_request(GPIO_PTZ0, NULL); > - gpio_direction_input(GPIO_PTZ0); > - > - val = gpio_get_value(GPIO_PTZ0); > - > - gpio_free(GPIO_PTZ0); > - gpio_request(GPIO_FN_INTC_IRQ0, NULL); > - > - return val ? 0 : 1; > -} > - > -static int ts_init(void) > -{ > - gpio_request(GPIO_FN_INTC_IRQ0, NULL); > - return 0; > -} > +static const struct property_entry tsc2007_properties[] = { > + PROPERTY_ENTRY_U32("ti,x-plate-ohms", 180), > + { } > +}; > > -static struct tsc2007_platform_data tsc2007_info = { > - .model = 2007, > - .x_plate_ohms = 180, > - .get_pendown_state = ts_get_pendown_state, > - .init_platform_hw = ts_init, > +static const struct software_node tsc2007_swnode = { > + .name = "tsc2007", > + .properties = tsc2007_properties, > }; > > static struct i2c_board_info ts_i2c_clients = { > I2C_BOARD_INFO("tsc2007", 0x48), > .type = "tsc2007", > - .platform_data = &tsc2007_info, > .irq = IRQ0, > + .swnode = &tsc2007_swnode, > }; > > static struct regulator_consumer_supply cn12_power_consumers[] = > @@ -1241,8 +1224,9 @@ static int __init arch_setup(void) > gpio_direction_output(GPIO_PTF4, 1); > > /* enable TouchScreen */ > - i2c_register_board_info(0, &ts_i2c_clients, 1); > + gpio_request(GPIO_FN_INTC_IRQ0, NULL); > irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW); > + i2c_register_board_info(0, &ts_i2c_clients, 1); > } > > /* enable CEU0 */ > -- > 2.46.0.184.g6999bdac58-goog Thanks for your patch! I am not 100% sure whether removing the method for "pen down" won't have any negative impact on the driver capabilities. Could you elaborate on this change a little more? Sorry for being so late! Adrian
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 6f13557eecd6..4833bec0c3c5 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -26,6 +26,7 @@ #include <linux/platform_data/tmio.h> #include <linux/platform_data/tsc2007.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/sh_eth.h> @@ -589,39 +590,21 @@ static struct platform_device keysc_device = { /* TouchScreen */ #define IRQ0 evt2irq(0x600) -static int ts_get_pendown_state(struct device *dev) -{ - int val = 0; - gpio_free(GPIO_FN_INTC_IRQ0); - gpio_request(GPIO_PTZ0, NULL); - gpio_direction_input(GPIO_PTZ0); - - val = gpio_get_value(GPIO_PTZ0); - - gpio_free(GPIO_PTZ0); - gpio_request(GPIO_FN_INTC_IRQ0, NULL); - - return val ? 0 : 1; -} - -static int ts_init(void) -{ - gpio_request(GPIO_FN_INTC_IRQ0, NULL); - return 0; -} +static const struct property_entry tsc2007_properties[] = { + PROPERTY_ENTRY_U32("ti,x-plate-ohms", 180), + { } +}; -static struct tsc2007_platform_data tsc2007_info = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, - .init_platform_hw = ts_init, +static const struct software_node tsc2007_swnode = { + .name = "tsc2007", + .properties = tsc2007_properties, }; static struct i2c_board_info ts_i2c_clients = { I2C_BOARD_INFO("tsc2007", 0x48), .type = "tsc2007", - .platform_data = &tsc2007_info, .irq = IRQ0, + .swnode = &tsc2007_swnode, }; static struct regulator_consumer_supply cn12_power_consumers[] = @@ -1241,8 +1224,9 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTF4, 1); /* enable TouchScreen */ - i2c_register_board_info(0, &ts_i2c_clients, 1); + gpio_request(GPIO_FN_INTC_IRQ0, NULL); irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW); + i2c_register_board_info(0, &ts_i2c_clients, 1); } /* enable CEU0 */
Convert the board to use static device properties instead of platform data to describe the touchscreen, so that support for platform data can be removed from tsc2007 driver (ecovec24 is the last board using this mechanism of describing tsc2007). Device properties do not allow custom board methods, so the method for getting "pen down" state was removed (the driver is capable of working without it). If this functionality is needed proper pin control/gpio support needs to be implemented so that the same pin can serve as an input GPIO and an interrupt. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- arch/sh/boards/mach-ecovec24/setup.c | 38 ++++++++-------------------- 1 file changed, 11 insertions(+), 27 deletions(-)