From patchwork Thu Nov 12 12:21:38 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Hans Verkuil (hansverk)" X-Patchwork-Id: 7601871 Return-Path: X-Original-To: patchwork-linux-input@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 88248BF90C for ; Thu, 12 Nov 2015 12:32:59 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 2E27A2073E for ; Thu, 12 Nov 2015 12:32:58 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9EAAE2074A for ; Thu, 12 Nov 2015 12:32:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752840AbbKLMcX (ORCPT ); Thu, 12 Nov 2015 07:32:23 -0500 Received: from aer-iport-1.cisco.com ([173.38.203.51]:42192 "EHLO aer-iport-1.cisco.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752573AbbKLMcX (ORCPT ); Thu, 12 Nov 2015 07:32:23 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=cisco.com; i=@cisco.com; l=13517; q=dns/txt; s=iport; t=1447331542; x=1448541142; h=from:to:cc:subject:date:message-id; bh=jWVjgz49UG/gHnpWp+azhbmdb5TGNss6+1Zko9IUySM=; b=Y2i4Hv/XqgPKR7VYO1tJ2xS5R1az5ZuugX435r3X7qvEbLd73B16D1s5 iXedUCCKBz2lSItV9bAyGEe8flGgNjrJDHx8c9N2pIXneYYPzVyYkb6dS q4EOB2Yf9n0djIjwpotP533SNngz90C/lgXfvMSmfAZ2Fk2dbqih428z2 Q=; X-IronPort-AV: E=Sophos;i="5.20,281,1444694400"; d="scan'208";a="631678399" Received: from aer-iport-nat.cisco.com (HELO aer-core-4.cisco.com) ([173.38.203.22]) by aer-iport-1.cisco.com with ESMTP; 12 Nov 2015 12:22:01 +0000 Received: from cobaltpc1.rd.cisco.com ([10.47.79.222]) by aer-core-4.cisco.com (8.14.5/8.14.5) with ESMTP id tACCLvM9009470; Thu, 12 Nov 2015 12:22:01 GMT From: Hans Verkuil To: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org, linux-input@vger.kernel.org, linux-samsung-soc@vger.kernel.org, lars@opdenkamp.eu, linux@arm.linux.org.uk, Hans Verkuil , Kamil Debski , Hans Verkuil Subject: [PATCHv10 09/16] cec.txt: add CEC framework documentation Date: Thu, 12 Nov 2015 13:21:38 +0100 Message-Id: X-Mailer: git-send-email 2.6.2 In-Reply-To: References: In-Reply-To: References: Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Spam-Status: No, score=-14.9 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY, USER_IN_DEF_DKIM_WL autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Document the new HDMI CEC framework. Signed-off-by: Hans Verkuil [k.debski@samsung.com: add DocBook documentation by Hans Verkuil, with Signed-off-by: Kamil Debski Signed-off-by: Hans Verkuil --- Documentation/cec.txt | 326 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 326 insertions(+) create mode 100644 Documentation/cec.txt diff --git a/Documentation/cec.txt b/Documentation/cec.txt new file mode 100644 index 0000000..90c2c7f --- /dev/null +++ b/Documentation/cec.txt @@ -0,0 +1,326 @@ +CEC Kernel Support +================== + +The CEC framework provides a unified kernel interface for use with HDMI CEC +hardware. It is designed to handle a multiple types of hardware (receivers, +transmitters, USB dongles). The framework also gives the option to decide +what to do in the kernel driver and what should be handled by userspace +applications. In addition it integrates the remote control passthrough +feature into the kernel's remote control framework. + + +The CEC Protocol +---------------- + +The CEC protocol enables consumer electronic devices to communicate with each +other through the HDMI connection. The protocol uses logical addresses in the +communication. The logical address is strictly connected with the functionality +provided by the device. The TV acting as the communication hub is always +assigned address 0. The physical address is determined by the physical +connection between devices. + +The CEC framework described here is up to date with the CEC 2.0 specification. +It is documented in the HDMI 1.4 specification with the new 2.0 bits documented +in the HDMI 2.0 specification. But for most of the features the freely available +HDMI 1.3a specification is sufficient: + +http://www.microprocessor.org/HDMISpecification13a.pdf + + +The Kernel Interface +==================== + +CEC Adapter +----------- + +The struct cec_adapter represents the CEC adapter hardware. It is created by +calling cec_create_adapter() and deleted by calling cec_delete_adapter(): + +struct cec_adapter *cec_create_adapter(const struct cec_adap_ops *ops, + void *priv, const char *name, u32 caps, + u8 ninputs, struct module *owner, struct device *parent); +void cec_delete_adapter(struct cec_adapter *adap); + +To create an adapter you need to pass the following information: + +ops: adapter operations which are called by the CEC framework and that you +have to implement. + +priv: will be stored in adap->priv and can be used by the adapter ops. + +name: the name of the CEC adapter + +caps: capabilities of the CEC adapter. These capabilities determine the + capabilities of the hardware and which parts are to be handled + by userspace and which parts are handled by kernelspace. The + capabilities are returned by CEC_ADAP_G_CAPS. + +ninputs: the number of HDMI inputs of the device. This may be 0. This + is returned by CEC_ADAP_G_CAPS. + +owner: the module owner. + +parent: the parent device. + + +After creating the adapter the driver can modify the following fields +in struct cec_adapter: + + u8 available_log_addrs; + +This determines the number of simultaneous logical addresses the hardware +can program. Often this is 1, which is also the default. + + u8 pwr_state; + +The CEC_MSG_GIVE_DEVICE_POWER_STATUS power state. By default this is +CEC_OP_POWER_STATUS_ON (0). The driver can change this to signal power +state transitions. + + u16 phys_addr; + +By default this is 0xffff, but drivers can change this. The phys_addr field +must be set before the CEC adapter is enabled (see the adap_enable op below). +While the CEC adapter remains enabled it cannot be changed. Drivers never set +this if CEC_CAP_PHYS_ADDR is set. + + u32 vendor_id; + +By default this is CEC_VENDOR_ID_NONE (0xffffffff). It should not be changed +once the adapter is configured. Drivers never set this if CEC_CAP_VENDOR_ID +is set. + + u8 cec_version; + +The CEC version that the framework should support. By default this is the +latest version, but it can be changed to an older version, causing attempts +to use later extensions to fail. Obviously this should be set before the +CEC adapter is enabled. + +To register the /dev/cecX device node and the remote control device (if +CEC_CAP_RC is set) you call: + +int cec_register_adapter(struct cec_adapter *adap); + +To unregister the devices call: + +void cec_unregister_adapter(struct cec_adapter *adap); + + +Implementing the Low-Level CEC Adapter +-------------------------------------- + +The following low-level adapter operations have to be implemented in +your driver: + +struct cec_adap_ops { + /* Low-level callbacks */ + int (*adap_enable)(struct cec_adapter *adap, bool enable); + int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); + int (*adap_transmit)(struct cec_adapter *adap, u32 timeout_ms, struct cec_msg *msg); + + /* High-level callbacks */ + ... +}; + +The three low-level ops deal with various aspects of controlling the CEC adapter +hardware: + +To enable/disable the hardware: + + int (*adap_enable)(struct cec_adapter *adap, bool enable); + +This callback enables or disables the CEC hardware. Enabling the CEC hardware +means powering it up in a state where no logical addresses are claimed. This +op assumes that the physical address (adap->phys_addr) is valid when enable is +true and will not change while the CEC adapter remains enabled. The initial +state of the CEC adapter after calling cec_create_adapter() is disabled. + +To program a new logical address: + + int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); + +If logical_addr == CEC_LOG_ADDR_INVALID then all programmed logical addresses +are to be erased. Otherwise the given logical address should be programmed. +If the maximum number of available logical addresses is exceeded, then it +should return -ENXIO. Once a logical address is programmed the CEC hardware +can start receiving messages. + +To transmit a new message: + + int (*adap_transmit)(struct cec_adapter *adap, u32 timeout_ms, + u8 retries, struct cec_msg *msg); + +This transmits a new message. The timeout_ms argument is the suggested timeout +in milliseconds to use in the hardware (200 ms for a poll message, 1000 ms for +other messages). The retries argument is the suggested number of retries for +the transmit. The low level implementation is responsible for repeating the +transmit in case of a failure. This is typically something that the hardware +will do for you. The recommended number of retry attempts are 1 for a poll +message and 3 for other messages. + +Your adapter driver will also have to react to events (typically interrupt +driven) by calling into the framework in the following situations: + +When a transmit finished (successfully or otherwise): + +void cec_transmit_done(struct cec_adapter *adap, u32 status); + +The status can be one of: + +CEC_TX_STATUS_OK: the transmit was successful. +CEC_TX_STATUS_ARB_LOST: arbitration was lost: another CEC initiator +unexpectedly takes control of the CEC line and you lost the arbitration. +#define CEC_TX_STATUS_RETRY_TIMEOUT: could not transmit the message after +trying multiple times. + +Never return CEC_TX_STATUS_FEATURE_ABORT or CEC_TX_STATUS_REPLY_TIMEOUT: +these are high-level statuses that are returned by the CEC framework and +not by a CEC adapter driver. + +When a CEC message was received: + +void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg); + +Speaks for itself. + +When the number connected inputs changes: + +void cec_connected_inputs(struct cec_adapter *adap, u16 connected_inputs); + +The connected_inputs argument is a bit mask where bit 0 refers to HDMI input 0, +etc. Only the first ninputs (see CEC_ADAP_G_CAPS) bits can be 1, the remainder +are always 0. This function should be called when the HDMI receiver driver +detects when a new device is connected or disconnected from a given input. + +The CEC framework will pass this information on to the user. + +Implementing the High-Level CEC Adapter +--------------------------------------- + +The low-level operations drive the hardware, the high-level operations are +CEC protocol driven. The following high-level callbacks are available: + +struct cec_adap_ops { + /* Low-level callbacks */ + ... + + /* High-level CEC message callback */ + int (*received)(struct cec_adapter *adap, struct cec_msg *msg); + + /* High-level CDC Hotplug Detect callbacks */ + u8 (*source_cdc_hpd)(struct cec_adapter *adap, u8 cdc_hpd_state); + void (*sink_cdc_hpd)(struct cec_adapter *adap, u8 cdc_hpd_state, u8 cdc_hpd_error); + + /* High-level Audio Return Channel callbacks */ + int (*sink_initiate_arc)(struct cec_adapter *adap); + int (*sink_terminate_arc)(struct cec_adapter *adap); + int (*source_arc_initiated)(struct cec_adapter *adap); + int (*source_arc_terminated)(struct cec_adapter *adap); +}; + +The received() callback allows the driver to optionally handle a newly +received CEC message + + int (*received)(struct cec_adapter *adap, struct cec_msg *msg); + +If the driver wants to process a CEC message, then it can implement this +callback. If it doesn't want to handle this message, then it should return +-ENOMSG, otherwise the CEC framework assumes it processed this message and +it will not no anything with it. + +The other callbacks deal with two CEC features: CDC Hotplug Detect and +Audio Return Channel. Here the framework takes care of handling these +messages and it calls the callbacks to notify the driver when it needs +to take action. + +CDC Hotplug Support +------------------- + +A source received a hotplug state change message: + + u8 (*source_cdc_hpd)(struct cec_adapter *adap, u8 cdc_hpd_state); + +A source received a CEC_MSG_CDC_HPD_SET_STATE message. The framework will +reply with a CEC_MSG_CDC_HPD_REPORT_STATE message and this callback is used +to fill in the HPD Error Code Operand of the REPORT_STATE message. In addition, +the driver can act in this callback on the hotplug state change. + +Only implement if CEC_CAP_CDC_HPD is set. + +A sink received a hotplug report state message: + + void (*sink_cdc_hpd)(struct cec_adapter *adap, u8 cdc_hpd_state, u8 cdc_hpd_error); + +A sink received a CEC_MSG_CDC_HPD_REPORT_STATE message. This callback will +do anything necessary to implement this hotplug change. The two arguments +are the HPD Error State and HPD Error Code Operands from the CEC_MSG_CDC_HPD_REPORT_STATE +message. + + +Audio Return Channel Support +---------------------------- + +Called if a CEC_MSG_INITIATE_ARC message is received by an HDMI sink. +This callback should start sending audio over the audio return channel. If +successful it should return 0. + + int (*sink_initiate_arc)(struct cec_adapter *adap); + +Called if a CEC_MSG_TERMINATE_ARC message is received by an HDMI sink. +This callback should stop sending audio over the audio return channel. If +successful it should return 0. + + void (*sink_terminate_arc)(struct cec_adapter *adap); + +Called if a CEC_MSG_REPORT_ARC_INITIATED message is received by an +HDMI source. This callback can be used to enable receiving audio from +the audio return channel. + + void (*source_arc_initiated)(struct cec_adapter *adap); + +Called if a CEC_MSG_REPORT_ARC_TERMINATED message is received by an +HDMI source. This callback can be used to disable receiving audio from +the audio return channel. + + void (*source_arc_terminated)(struct cec_adapter *adap); + + +CEC framework functions +----------------------- + +CEC Adapter drivers can call the following CEC framework functions: + +int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, + bool block); + +Transmit a CEC message. If block is true, then wait until the message has been +transmitted, otherwise just queue it and return. + +int cec_claim_log_addrs(struct cec_adapter *adap, + struct cec_log_addrs *log_addrs, bool block); + +Claim the CEC logical addresses. Should never be called if CEC_CAP_LOG_ADDRS +is set. If block is true, then wait until the logical addresses have been +claimed, otherwise just queue it and return. + +int cec_enable(struct cec_adapter *adap, bool enable); + +Enable or disable the CEC adapter. HDMI transmitters will typically disable +the adapter when the hotplug signal goes down and enable it after it went up +again and the EDID was read containing the new physical address. Should never +be called if CEC_CAP_STATE is set. + +u8 cec_sink_cdc_hpd(struct cec_adapter *adap, u8 input_port, u8 cdc_hpd_state); + +If an HDMI receiver supports hotplug signalling over CDC (CEC_CAP_CDC_HPD is +set), then the driver should call this function whenever the hotplug state +changes for an input. This call will send an appropriate CDC message over +the CEC line. It returns CEC_OP_HPD_ERROR_NONE on success, if the adapter +is unconfigured it returns CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE and if +the cec_transmit fails it returns CEC_OP_HPD_ERROR_OTHER. + +void cec_log_status(struct cec_adapter *adap); + +This logs the current CEC adapter status in the kernel log. Useful for +debugging and implementing the V4L2 VIDIOC_LOG_STATUS ioctl.