@@ -271,6 +271,11 @@ struct map_desc spear3xx_io_desc[] __initdata = {
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
.length = SZ_4K,
.type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(SPEAR3XX_ICM3_SDRAM_CTRL_BASE),
+ .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SDRAM_CTRL_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
},
};
@@ -430,6 +430,11 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
.length = SZ_4K,
.type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(SPEAR6XX_ICM3_SDRAM_CTRL_BASE),
+ .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SDRAM_CTRL_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
},
};
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clcd.o clock.o time.o smi.o
+obj-y := clcd.o clock.o pll_clk.o smi.o time.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
obj-$(CONFIG_MACH_SPEAR310) += plgpio.o
@@ -586,11 +586,10 @@ int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
* call routine to put ddr in refresh mode, and
* configure pll.
*/
- /* TBD */
+ pll_set_rate(tbls[i].m, tbls[i].p, tbls[i].n);
clk->rate = rate;
}
-
- return ret;
+ return 0;
}
val = readl(config->mode_reg) &
@@ -616,7 +615,6 @@ int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
config->masks->norm_fdbk_m_shift;
writel(val, config->cfg_reg);
-
clk->rate = rate;
return 0;
@@ -264,5 +264,6 @@ int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
unsigned long clcd_calc_rate(struct clk *clk, int index);
int clcd_clk_recalc(struct clk *clk, unsigned long *rate, unsigned long prate);
int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+void pll_set_rate(u16 pdiv, u8 nmul, u8 hclkdiv);
#endif /* __PLAT_CLOCK_H */
new file mode 100644
@@ -0,0 +1,187 @@
+/*
+ * arch/arm/plat-spear/pll_clk.S
+ *
+ * SPEAR3xx and SPEAR6xx specific functions that will run in
+ * cache. These funstions intend to configure the PLL.
+ *
+ * Copyright (ST) 2010 Deepak Sikri <deepak.sikri@.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/suspend.h>
+
+#if defined(CONFIG_ARCH_SPEAR3XX) || defined(CONFIG_ARCH_SPEAR6XX)
+.text
+ENTRY(pll_set_rate)
+ stmfd sp!, {r0-r12, lr}
+
+ /* Lock down the TLB entry to the current victim */
+ mrc p15, 0, r3, c10, c0, 0 /* read the lockdown register */
+ orr r3, r3, #1 /* set the preserved bit */
+ mcr p15, 0, r3, c10, c0, 0 /* write to the lockdown register */
+
+ /*
+ * set r4 to the value of the address to be locked down.
+ * Invalidate the TLB single entry in TLB to ensure that
+ * the locked address is not already in TLB.
+ * MPMC, System Controller & Miscellaneous register address
+ * are locked down below.
+ */
+
+ ldr r4, MPMC_BASE_VA
+ /* Invalidate the MPMC virtual address in TLB. */
+ mcr p15, 0, r4, c8, c7, 1
+ /* TLB will miss and entry will be reloaded */
+ ldr r4, [r4]
+ /* read the lockdown register (victim will have rloaded) */
+ mrc p15, 0, r3, c10, c0, 0
+
+ ldr r4, SYS_CTRL_BASE_VA
+ /* Invalidate the System controller virtual address in TLB */
+ mcr p15, 0, r4, c8, c7, 1
+ /* TLB will miss and entry will be reloaded */
+ ldr r4, [r4]
+ /* read the lockdown register (victim will have rloaded) */
+ mrc p15, 0, r3, c10, c0, 0
+
+ ldr r4, MISC_BASE_VA
+ /* Invalidate the Miscellaneous registers virtual address in TLB */
+ mcr p15, 0, r4, c8, c7, 1
+ /* TLB will miss and entry will be reloaded */
+ ldr r4, [r4]
+ /* read the lockdown register (victim will have rloaded) */
+ mrc p15, 0, r3, c10, c0, 0
+
+ /* clear preserve bit */
+ bic r3, r3, #1
+ /* write to the lockdown register */
+ mcr p15, 0, r3, c10, c0, 0
+
+ ldr r7, MPMC_BASE_VA
+ ldr r8, SYS_CTRL_BASE_VA
+ ldr r6, MISC_BASE_VA
+ /* Prefetch certain instructions in the cache. */
+ adr r4, cache_prefetch_start1
+ adr r5, cache_prefetch_end1
+ mvn r3, #0x1F
+ ands r4, r3, r4
+ /* Lock Instructions in i-cache */
+fetch_loop:
+ /*
+ * copy a cache-line-sized block of main memory to a cache
+ * line in the I-cache.
+ */
+ mcr p15, 0, r4, c7, c13, 1
+ cmp r4, r5
+ addls r4, r4, #0x20
+ bls fetch_loop
+cache_prefetch_start1:
+ /* Put SDRAM in self-refresh mode */
+ ldr r3, [r7, #0x1c]
+ /* Clear START bit(24) of MEMCTL_GP_03 register in MPMC */
+ ldr r4, =0x1000000
+ bic r3, r3, r4
+ str r3, [r7, #0x1c]
+
+ ldr r3, [r7, #0xe4]
+ ldr r4, =0xffff0000
+ /* Latch the current self refresh time */
+ mov r9, r3
+ /* Increase the self refresh exit time */
+ bic r3, r3, r4
+ ldr r4, =0xffff
+ /* Program the SDRAM self refresh exit time on read command */
+ orr r3, r3, r4, LSL #16
+ str r3, [r7, #0xe4]
+
+ ldr r3, [r7, #0x1c]
+ /* Set the SREFRESH bit(16) */
+ ldr r4, =0x10000
+ orr r3, r3, r4
+ str r3, [r7, #0x1c]
+
+ /* Put the system in slow mode, use system controller */
+ ldr r3, [r8]
+ bic r3, r3, #0x7
+ /* Set the apt mode bits(2:0) in SCCTRL register */
+ orr r3, r3, #0x2
+ str r3, [r8]
+
+wait_till_slow_mode:
+ ldr r3, [r8]
+ and r3, r3, #0x78 /* Wait for the mode to be updated */
+ cmp r3, #0x10 /* Poll the SCCTRL register status bits (6:3) */
+ bne wait_till_slow_mode
+
+ /*
+ * reprogram the m(r0), p(r2), n(r1) values in the PLL
+ * control registers (PLL_FRQ register in misc space).
+ */
+ ldr r3, [r6, #0x0c]
+ bic r3, r3, #0x00ff
+ /* Program the PLL post divisor: p */
+ orr r3, r3, r2
+ str r3, [r6, #0x0c]
+
+ ldr r3, [r6, #0x0c]
+ ldr r4, =0xffff0000
+ bic r3, r3, r4
+ bic r3, r3, #0x0700
+ /* Program the PLL pre divisor: n */
+ orr r3, r3, r1, LSL #8
+ /* Program the PLL feedback divisor: m */
+ orr r3, r3, r0, LSL #24
+ str r3, [r6, #0x0c]
+
+ /* Move the system in Normal mode, use system controller */
+ ldr r3, [r8, #0x0]
+ ldr r4, =0xfffffff8
+ /* Set the apt mode bits(2:0) in SCCTRL register */
+ and r3, r3, r4
+ orr r3, r3, #0x4
+ str r3, [r8, #0x0]
+
+wait_till_normal_mode:
+ ldr r3, [r8, #0x0]
+ and r3, r3, #0x78
+ cmp r3, #0x20 /* Poll the SCCTRL register status bits (6:3) */
+ bne wait_till_normal_mode
+
+ /* Exit DDR-SDRAM from self-refresh mode */
+ ldr r10, MPMC_BASE_VA
+ /* Clear the SREFRESH bit(16) */
+ ldr r3, [r10, #0x1c]
+ ldr r4, =0x10000
+ bic r3, r3, r4
+ str r3, [r10, #0x1c]
+ /* Restore the SDRAM self refresh exit time on read command */
+ mov r3, r9
+ str r3, [r7, #0xe4]
+ /* Begin the command processing in controller */
+ ldr r4, =0x1000000
+ orr r3, r3, r4
+ /* Set START bit(24) of MEMCTL_GP_03 register in MPMC*/
+ str r3, [r10, #0x1c]
+
+ ldmfd sp!, {r0-r12, pc}
+
+/* This is the end of the code to be copied */
+
+SYS_CTRL_BASE_VA :
+ .word IO_ADDRESS(SYS_CTRL_BASE_PA)
+MPMC_BASE_VA :
+ .word IO_ADDRESS(MPMC_BASE_PA)
+MISC_BASE_VA :
+ .word IO_ADDRESS(MISC_BASE_PA)
+cache_prefetch_end1 :
+
+#elif defined(CONFIG_ARCH_SPEAR13XX)
+.text
+ENTRY(pll_set_rate)
+#endif