@@ -21,7 +21,7 @@ missing
compile
libtool
ltmain.sh
-
+test-driver
# Compiled executables
*.o
@@ -1,4 +1,4 @@
-SUBDIRS = src
+SUBDIRS = src tests
dist_man_MANS = evmctl.1
doc_DATA = examples/ima-genkey-self.sh examples/ima-genkey.sh examples/ima-gen-local-ca.sh
@@ -67,6 +67,7 @@ EVMCTL_MANPAGE_DOCBOOK_XSL
AC_CONFIG_FILES([Makefile
src/Makefile
+ tests/Makefile
packaging/ima-evm-utils.spec
])
AC_OUTPUT
new file mode 100644
@@ -0,0 +1,16 @@
+# Generated by test driver
+*.log
+*.trs
+
+# Generated by tests
+*.txt
+*.out
+*.sig
+*.sig2
+
+# Generated certs and keys (by gen-keys.sh)
+*.cer
+*.pub
+*.key
+*.conf
+
new file mode 100644
@@ -0,0 +1,12 @@
+check_SCRIPTS =
+TESTS = $(check_SCRIPTS)
+
+check_SCRIPTS += ima_hash.test sign_verify.test
+
+clean-local:
+ -rm -f *.txt *.out *.sig *.sig2
+
+distclean: distclean-keys
+.PHONY: distclean-keys
+distclean-keys:
+ ./gen-keys.sh clean
new file mode 100755
@@ -0,0 +1,272 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# ima-evm-utils tests bash functions
+#
+# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# Tests accounting
+declare -i testspass=0 testsfail=0 testsskip=0
+
+# Exit codes (compatible with automake)
+declare -r OK=0
+declare -r FAIL=1
+declare -r HARDFAIL=99 # hard failure no matter testing mode
+declare -r SKIP=77
+
+# You can set env VERBOSE=1 to see more output from evmctl
+V=vvvv
+V=${V:0:$VERBOSE}
+V=${V:+-$V}
+
+# Exit if env FAILEARLY is defined.
+# Used in expect_{pass,fail}.
+exit_early() {
+ if [ $FAILEARLY ]; then
+ exit $1
+ fi
+}
+
+# Require particular executables to be present
+_require() {
+ ret=
+ for i; do
+ if ! type $i; then
+ echo "$i is required for test"
+ ret=1
+ fi
+ done
+ [ $ret ] && exit $HARDFAIL
+}
+
+# Only allow color output on tty
+if [ -t 1 ]; then
+ RED=$'\e[1;31m'
+ GREEN=$'\e[1;32m'
+ YELLOW=$'\e[1;33m'
+ BLUE=$'\e[1;34m'
+ CYAN=$'\e[1;36m'
+ NORM=$'\e[m'
+fi
+
+# Test mode determined by TFAIL variable:
+# undefined: to success testing
+# defined: failure testing
+TFAIL=
+TMODE=+ # mode character to prepend running command in log
+declare -i TNESTED=0 # just for sanity checking
+
+# Run positive test (one that should pass) and account its result
+expect_pass() {
+ local ret
+
+ if [ $TNESTED -gt 0 ]; then
+ echo $RED"expect_pass should not be run nested"$NORM
+ testsfail+=1
+ exit $HARDFAIL
+ fi
+ TFAIL=
+ TMODE=+
+ TNESTED+=1
+ [[ "$VERBOSE" -gt 1 ]] && echo "____ START positive test: $@"
+ "$@"
+ ret=$?
+ [[ "$VERBOSE" -gt 1 ]] && echo "^^^^ STOP ($ret) positive test: $@"
+ TNESTED+=-1
+ case $ret in
+ 0) testspass+=1 ;;
+ 77) testsskip+=1 ;;
+ 99) testsfail+=1; exit_early 1 ;;
+ *) testsfail+=1; exit_early 2 ;;
+ esac
+ return $ret
+}
+
+# Eval negative test (one that should fail) and account its result
+expect_fail() {
+ local ret
+
+ if [ $TNESTED -gt 0 ]; then
+ echo $RED"expect_fail should not be run nested"$NORM
+ testsfail+=1
+ exit $HARDFAIL
+ fi
+
+ TFAIL=yes
+ TMODE=-
+ TNESTED+=1
+ [[ "$VERBOSE" -gt 1 ]] && echo "____ START negative test: $@"
+ "$@"
+ ret=$?
+ [[ "$VERBOSE" -gt 1 ]] && echo "^^^^ STOP ($ret) negative test: $@"
+ TNESTED+=-1
+ case $ret in
+ 0) testsfail+=1; exit_early 3 ;;
+ 77) testsskip+=1 ;;
+ 99) testsfail+=1; exit_early 4 ;;
+ *) testspass+=1 ;;
+ esac
+ # Restore defaults (as in positive tests)
+ # for tests to run without wrappers
+ TFAIL=
+ TMODE=+
+ return $ret
+}
+
+# return true if current test is positive
+_is_expect_pass() {
+ [ ! $TFAIL ]
+}
+
+# return true if current test is negative
+_is_expect_fail() {
+ [ $TFAIL ]
+}
+
+# Show blank line and color following text to red
+# if it's real error (ie we are in expect_pass mode).
+red_if_failure() {
+ if _is_expect_pass; then
+ echo $@ $RED
+ COLOR_RESTORE=1
+ fi
+}
+
+# For hard errors
+red_always() {
+ echo $@ $RED
+ COLOR_RESTORE=1
+}
+
+color_restore() {
+ [ $COLOR_RESTORE ] && echo $@ $NORM
+ COLOR_RESTORE=
+}
+
+ADD_DEL=
+ADD_TEXT_FOR=
+# _evmctl_run should be run as `_evmctl_run ... || return'
+_evmctl_run() {
+ local op=$1 out=$1-$$.out
+ local text_for=${FOR:+for $ADD_TEXT_FOR}
+ # Additional parameters:
+ # ADD_DEL: additional files to rm on failure
+ # ADD_TEXT_FOR: append to text as 'for $ADD_TEXT_FOR'
+
+ cmd="evmctl $V $EVMCTL_ENGINE $@"
+ echo $YELLOW$TMODE $cmd$NORM
+ $cmd >$out 2>&1
+ ret=$?
+
+ # Shell special and signal exit codes (except 255)
+ if [ $ret -ge 126 -a $ret -lt 255 ]; then
+ red_always
+ echo "evmctl $op failed hard with ($ret) $text_for"
+ sed 's/^/ /' $out
+ color_restore
+ rm $out $ADD_DEL
+ ADD_DEL=
+ ADD_TEXT_FOR=
+ return $HARDFAIL
+ elif [ $ret -gt 0 ]; then
+ red_if_failure
+ echo "evmctl $op failed" ${TFAIL:+properly} "with ($ret) $text_for"
+ # Show evmctl output only in verbose mode or if real failure.
+ if _is_expect_pass || [ "$VERBOSE" ]; then
+ sed 's/^/ /' $out
+ fi
+ color_restore
+ rm $out $ADD_DEL
+ ADD_DEL=
+ ADD_TEXT_FOR=
+ return $FAIL
+ elif _is_expect_fail; then
+ red_always
+ echo "evmctl $op wrongly succeeded $text_for"
+ sed 's/^/ /' $out
+ color_restore
+ else
+ [ "$VERBOSE" ] && sed 's/^/ /' $out
+ fi
+ rm $out
+ ADD_DEL=
+ ADD_TEXT_FOR=
+ return $OK
+}
+
+# Extract xattr $attr from $file into $out file skipping $pref'ix
+_extract_xattr() {
+ local file=$1 attr=$2 out=$3 pref=$4
+
+ getfattr -n $attr -e hex $file \
+ | grep "^$attr=" \
+ | sed "s/^$attr=$pref//" \
+ | xxd -r -p > $out
+}
+
+# Test if xattr $attr in $file matches $pref'ix
+# Show error and fail otherwise.
+_test_xattr() {
+ local file=$1 attr=$2 pref=$3
+ local text_for=${ADD_TEXT_FOR:+ for $ADD_TEXT_FOR}
+
+ if ! getfattr -n $attr -e hex $file | egrep -qx "$attr=$pref"; then
+ red_if_failure
+ echo "Did not find expected hash$text_for:"
+ echo " $attr=$pref"
+ echo ""
+ echo "Actual output below:"
+ getfattr -n $attr -e hex $file | sed 's/^/ /'
+ color_restore
+ rm $file
+ ADD_TEXT_FOR=
+ return $FAIL
+ fi
+ ADD_TEXT_FOR=
+}
+
+# Try to enable gost-engine if needed.
+_enable_gost_engine() {
+ # Do not enable if it's already working (enabled by user)
+ if ! openssl md_gost12_256 /dev/null >/dev/null 2>&1 \
+ && openssl engine gost >/dev/null 2>&1; then
+ EVMCTL_ENGINE="--engine gost"
+ OPENSSL_ENGINE="-engine gost"
+ fi
+}
+
+# Show test stats and exit into automake test system
+# with proper exit code (same as ours).
+_report_exit() {
+ if [ $testsfail -gt 0 ]; then
+ echo "================================="
+ echo " Run with FAILEARLY=1 $0 $@"
+ echo " To stop after first failure"
+ echo "================================="
+ fi
+ [ $testspass -gt 0 ] && echo -n $GREEN || echo -n $NORM
+ echo -n "PASS: $testspass"
+ [ $testsskip -gt 0 ] && echo -n $YELLOW || echo -n $NORM
+ echo -n " SKIP: $testsskip"
+ [ $testsfail -gt 0 ] && echo -n $RED || echo -n $NORM
+ echo " FAIL: $testsfail"
+ echo $NORM
+ if [ $testsfail -gt 0 ]; then
+ exit $FAIL
+ elif [ $testspass -gt 0 ]; then
+ exit $OK
+ else
+ exit $SKIP
+ fi
+}
+
new file mode 100755
@@ -0,0 +1,93 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Generate keys for the tests
+#
+# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+cd $(dirname $0)
+PATH=../src:$PATH
+type openssl
+
+log() {
+ echo - "$*"
+ eval "$@"
+}
+
+if [ "$1" = clean ]; then
+ rm -f test-ca.conf
+elif [ ! -e test-ca.conf ]; then
+cat > test-ca.conf <<- EOF
+ [ req ]
+ distinguished_name = req_distinguished_name
+ prompt = no
+ string_mask = utf8only
+ x509_extensions = v3_ca
+
+ [ req_distinguished_name ]
+ O = IMA-CA
+ CN = IMA/EVM certificate signing key
+ emailAddress = ca@ima-ca
+
+ [ v3_ca ]
+ basicConstraints=CA:TRUE
+ subjectKeyIdentifier=hash
+ authorityKeyIdentifier=keyid:always,issuer
+EOF
+fi
+
+# RSA
+# Second key will be used for wrong key tests.
+for m in 1024 2048; do
+ if [ "$1" = clean ]; then
+ rm -f test-rsa$m.cer test-rsa$m.key test-rsa$m.pub
+ continue
+ fi
+ if [ ! -e test-rsa$m.key ]; then
+ log openssl req -verbose -new -nodes -utf8 -sha1 -days 10000 -batch -x509 \
+ -config test-ca.conf \
+ -newkey rsa:$m \
+ -out test-rsa$m.cer -outform DER \
+ -keyout test-rsa$m.key
+ # for v1 signatures
+ log openssl pkey -in test-rsa$m.key -out test-rsa$m.pub -pubout
+ fi
+done
+
+# EC-RDSA
+for m in \
+ gost2012_256:A \
+ gost2012_256:B \
+ gost2012_256:C \
+ gost2012_512:A \
+ gost2012_512:B; do
+ IFS=':' read -r algo param <<< "$m"
+ if [ "$1" = clean ]; then
+ rm -f test-$algo-$param.key test-$algo-$param.cer test-$algo-$param.pub
+ continue
+ fi
+ [ -e test-$algo-$param.key ] && continue
+ log openssl req -nodes -x509 -utf8 -days 10000 -batch \
+ -config test-ca.conf \
+ -newkey $algo \
+ -pkeyopt paramset:$param \
+ -out test-$algo-$param.cer -outform DER \
+ -keyout test-$algo-$param.key
+ if [ -s test-$algo-$param.key ]; then
+ log openssl pkey -in test-$algo-$param.key -out test-$algo-$param.pub -pubout
+ fi
+done
+
+# This script leaves test-ca.conf, *.cer, *.pub, *.key files for sing/verify tests.
+# They are never deleted except by `make distclean'.
+
new file mode 100755
@@ -0,0 +1,71 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# evmctl ima_hash tests
+#
+# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+cd $(dirname $0)
+PATH=../src:$PATH
+source ./functions.sh
+_require evmctl openssl getfattr
+
+trap _report_exit EXIT
+set -f # disable globbing
+
+check() {
+ local alg=$1 pref=$2 hash=$3
+ local file=$alg-hash.txt
+
+ rm -f $file
+ touch $file
+ # Generate hash with openssl, if it's failed skip test,
+ # unless it's negative test, then pass to evmctl
+ cmd="openssl dgst $OPENSSL_ENGINE -$alg $file"
+ echo - $cmd
+ hash=$(set -o pipefail; $cmd 2>/dev/null | cut -d' ' -f2)
+ if [ $? -ne 0 ] && _is_expect_pass; then
+ echo $CYAN"$alg test is skipped"$NORM
+ rm $file
+ return $SKIP
+ fi
+
+ ADD_TEXT_FOR=$alg ADD_DEL=$file \
+ _evmctl_run ima_hash --hashalgo $alg --xattr-user $file || return
+ ADD_TEXT_FOR=$alg \
+ _test_xattr $file user.ima $pref$hash || return
+ rm $file
+ return $OK
+}
+
+# check args: algo hdr-prefix
+expect_pass check md4 0x01
+expect_pass check md5 0x01
+expect_pass check sha1 0x01
+expect_fail check SHA1 0x01 # uppercase
+expect_fail check sha512-224 0x01 # valid for pkcs1
+expect_fail check sha512-256 0x01 # valid for pkcs1
+expect_fail check unknown 0x01 # nonexistent
+expect_pass check sha224 0x0407
+expect_pass check sha256 0x0404
+expect_pass check sha384 0x0405
+expect_pass check sha512 0x0406
+expect_pass check rmd160 0x0403
+expect_fail check sm3 0x01
+expect_fail check sm3-256 0x01
+_enable_gost_engine
+expect_pass check md_gost12_256 0x0412
+expect_pass check streebog256 0x0412
+expect_pass check md_gost12_512 0x0413
+expect_pass check streebog512 0x0413
+
new file mode 100755
@@ -0,0 +1,359 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# evmctl {,ima_}{sign,verify} tests
+#
+# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+cd $(dirname $0)
+PATH=../src:$PATH
+source ./functions.sh
+_require evmctl openssl xxd getfattr
+./gen-keys.sh >/dev/null 2>&1
+
+trap _report_exit EXIT
+set -f # disable globbing
+
+# Determine keyid from a cert
+_keyid() {
+ local cer=${1%.*}.cer cmd
+
+ cer=test-${cer#test-}
+ cmd="openssl x509 $OPENSSL_ENGINE \
+ -in $cer -inform DER -pubkey -noout"
+ id=$($cmd 2>/dev/null \
+ | openssl asn1parse \
+ | grep BIT.STRING \
+ | cut -d: -f1)
+ if [ -z "$id" ]; then
+ echo - $cmd >&2
+ echo "Cannot asn1parse $cer to determine keyid" >&2
+ exit 1
+ fi
+ openssl x509 $OPENSSL_ENGINE \
+ -in $cer -inform DER -pubkey -noout 2>/dev/null \
+ | openssl asn1parse -strparse $id -out /dev/stdout -noout \
+ | openssl dgst -c -sha1 \
+ | cut -d' ' -f2 \
+ | grep -o ":..:..:..:..$" \
+ | tr -d :
+}
+
+# Convert test $type into evmctl op prefix
+_op() {
+ if [ $1 = ima ]; then
+ echo ima_
+ fi
+}
+
+# Convert test $type into xattr name
+_xattr() {
+ if [ $1 = ima ]; then
+ echo user.ima
+ else
+ echo user.evm
+ fi
+}
+
+# Check that detached signature matches xattr signature
+_test_sigfile() {
+ local file=$1 attr=$2 file_sig=$3 file_sig2=$4
+
+ if [ ! -e $file_sig ]; then
+ red_always
+ echo "evmctl ima_sign: no detached signature $file_sig"
+ color_restore
+ rm $file
+ return $FAIL
+ fi
+
+ _extract_xattr $file $attr $file_sig2
+ if ! cmp -bl $file_sig $file_sig2; then
+ red_always
+ echo "evmctl ima_sign: xattr signature on $file differ from detached $file_sig"
+ color_restore
+ rm $file $file_sig $file_sig2
+ return $FAIL
+ fi
+
+ rm $file_sig $file_sig2
+}
+
+# Run single sign command
+_evmctl_sign() {
+ local type=$1 key=$2 alg=$3 file=$4 opts=$5
+
+ # Can check --sigfile for ima_sign
+ [ $type = ima ] && opts+=" --sigfile"
+
+ ADD_TEXT_FOR="$alg ($key)" ADD_DEL=$file \
+ _evmctl_run $(_op $type)sign $opts \
+ --hashalgo $alg --key $key --xattr-user $file || return
+
+ if [ $type = ima ]; then
+ _test_sigfile $file $(_xattr $type) $file.sig $file.sig2
+ fi
+}
+
+# Run and test {ima_,}sign operation
+check_sign() {
+ # Arguments are passed via global vars:
+ # TYPE (ima or evm),
+ # KEY,
+ # ALG (hash algo),
+ # PREF (signature header prefix),
+ # OPTS (additional options for evmctl),
+ # FILE (working file to sign).
+ local "$@"
+ local KEY=${KEY%.*}.key
+ local FILE=${FILE:-$ALG.txt}
+
+ # Normalize key filename
+ KEY=test-${KEY#test-}
+
+ # Append suffix to files for negative tests, because we may
+ # leave only good files for verify tests.
+ _is_expect_fail && FILE+='~'
+
+ rm -f $FILE
+ if ! touch $FILE; then
+ red_always
+ echo "Can't create test file: $FILE"
+ color_restore
+ return $HARDFAIL
+ fi
+
+ if _is_expect_pass; then
+ # Can openssl work with this digest?
+ cmd="openssl dgst $OPENSSL_ENGINE -$ALG $FILE"
+ echo - $cmd
+ if ! $cmd >/dev/null; then
+ echo $CYAN"$ALG ($KEY) test is skipped (openssl is unable to digest)"$NORM
+ return $SKIP
+ fi
+
+ if [ ! -e $KEY ]; then
+ red_always
+ echo "Key $KEY does not exist."
+ color_restore
+ return $HARDFAIL
+ fi
+
+ # Can openssl sign with this digest and key?
+ cmd="openssl dgst $OPENSSL_ENGINE -$ALG -sign $KEY -hex $FILE"
+ echo - $cmd
+ if ! $cmd >/dev/null; then
+ echo $CYAN"$ALG ($KEY) test is skipped (openssl is unable to sign)"$NORM
+ return $SKIP
+ fi
+ fi
+
+ # Fix keyid in the prefix.
+ if [[ $PREF =~ K ]]; then
+ keyid=$(_keyid $KEY)
+ if [ $? -ne 0 ]; then
+ red_always
+ echo "Unable to determine keyid for $KEY"
+ color_restore
+ return $HARDFAIL
+ fi
+ PREF=$(echo $PREF | sed "s/K/$keyid/")
+ fi
+
+ # Perform signing by evmctl
+ _evmctl_sign $TYPE $KEY $ALG $FILE "$OPTS" || return
+
+ # First simple pattern match the signature.
+ ADD_TEXT_FOR=$ALG \
+ _test_xattr $FILE $(_xattr $TYPE) $PREF.* || return
+
+ # This is all we can do for v1 signatures.
+ [[ "$OPTS" =~ --rsa ]] && return $OK
+
+ # This is all we can do for evm.
+ [[ $TYPE =~ evm ]] && return $OK
+
+ # Extract signature to a file
+ _extract_xattr $FILE $(_xattr $TYPE) $FILE.sig2 $PREF
+
+ # Verify extracted signature with openssl
+ cmd="openssl dgst $OPENSSL_ENGINE -$ALG -verify ${KEY%.*}.pub \
+ -signature $FILE.sig2 $FILE"
+ echo - $cmd
+ if ! $cmd; then
+ red_if_failure
+ echo "Signature v2 verification with openssl is failed."
+ color_restore
+ rm $FILE.sig2
+ return $FAIL
+ fi
+
+ rm $FILE.sig2
+ return $OK
+}
+
+# Test verify operation
+check_verify() {
+ # Arguments are passed via global vars:
+ # TYPE (ima or evm),
+ # KEY,
+ # ALG (hash algo),
+ # OPTS (additional options for evmctl),
+ # FILE (filename to verify).
+ local "$@"
+
+ if ! openssl dgst $OPENSSL_ENGINE -$ALG /dev/null >/dev/null 2>&1; then
+ echo $CYAN"$ALG ($KEY) test is skipped (openssl does not support $ALG)"$NORM
+ return $SKIP
+ fi
+
+ ADD_TEXT_FOR="$FILE ($KEY)" \
+ _evmctl_run $(_op $TYPE)verify --key $KEY --xattr-user $OPTS $FILE
+}
+
+# Test runners
+
+# Perform sign and verify ima and evm testing
+sign_verify() {
+ local key=$1 alg=$2 pref="$3" opts="$4"
+ local file=$alg.txt
+
+ # Set defaults:
+ # Public key is different for v1 and v2 (where x509 cert is used).
+ if [[ $opts =~ --rsa ]]; then
+ KEY=test-$key.pub
+ else
+ KEY=test-$key.cer
+ fi
+ ALG=$alg
+ PREF=$pref
+ OPTS=$opts
+ FILE=$file
+
+ TYPE=ima
+ if expect_pass check_sign; then
+
+ # Normal verify with proper key should pass
+ expect_pass check_verify
+
+ # Multiple files and some don't verify
+ expect_fail check_verify FILE=/dev/null,$file
+ fi
+
+ TYPE=evm
+ # Avoid running blkid for evm tests which may require root
+ OPTS="$opts --uuid"
+ if expect_pass check_sign; then
+
+ # Normal verify with proper key
+ expect_pass check_verify
+
+ # Verify with wrong key
+ expect_fail check_verify KEY=rsa2048
+ fi
+
+ # Note: Leaving TYPE=evm and file is evm signed
+}
+
+# Test --keys
+try_different_keys() {
+ # This run after sign_verify which leaves
+ # TYPE=evm and file is evm signed
+
+ # v2 signing can work with multiple keys in --key option
+ if [[ ! $OPTS =~ --rsa ]]; then
+
+ # Have correct key in the key list
+ expect_pass check_verify KEY=test-rsa2048.cer,$KEY
+ expect_pass check_verify KEY=/dev/null,$KEY,
+ fi
+
+ # Try key that is not used for signing
+ expect_fail check_verify KEY=rsa2048
+
+ # Try completely wrong key files
+ expect_fail check_verify KEY=/dev/null
+ expect_fail check_verify KEY=/dev/zero
+}
+
+try_different_sigs() {
+ # TYPE=evm and file is evm signed
+
+ # Test --imasig
+ if expect_pass check_sign OPTS="$OPTS --imasig"; then
+
+ # Verify both evm and ima sigs
+ expect_pass check_verify
+ expect_pass check_verify TYPE=ima
+ fi
+
+ # Test --imahash
+ if expect_pass check_sign OPTS="$OPTS --imahash"; then
+
+ expect_pass check_verify
+
+ # IMA hash is not verifiable by ima_verify
+ expect_fail check_verify TYPE=ima
+ fi
+
+ # Test --portable
+ expect_pass check_sign OPTS="$OPTS --portable" PREF=0x05
+ # Cannot be verified
+
+ # Test -i (immutable)
+ expect_pass check_sign OPTS="$OPTS -i" PREF=0x0303
+ # Cannot be verified
+}
+
+# Single test args: type key hash signature-prefix "evmctl-options"
+# sign_verify args: key hash signature-prefix "evmctl-options"
+# Only single test can be prefixed with expect_{fail,pass}
+# `sign_verify' can not be prefixed with expect_{fail,pass} because
+# it runs multiple tests inside. See more tests there.
+# signature-prefix can contain `K' which will be resolved to keyid (v2 only)
+
+## Test v1 signatures
+# Signature v1 only supports sha1 and sha256 so any other should fail
+expect_fail \
+ check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREF=0x0301 OPTS=--rsa
+
+sign_verify rsa1024 sha1 0x0301 --rsa
+sign_verify rsa1024 sha256 0x0301 --rsa
+ try_different_keys
+ try_different_sigs
+
+## Test v2 signatures with RSA PKCS#1
+# List of allowed hashes much greater but not all are supported.
+sign_verify rsa1024 md5 0x030201K0080
+sign_verify rsa1024 sha1 0x030202K0080
+sign_verify rsa1024 sha224 0x030207K0080
+sign_verify rsa1024 sha256 0x030204K0080
+ try_different_keys
+ try_different_sigs
+sign_verify rsa1024 sha384 0x030205K0080
+sign_verify rsa1024 sha512 0x030206K0080
+sign_verify rsa1024 rmd160 0x030203K0080
+
+# Test v2 signatures with EC-RDSA
+_enable_gost_engine
+sign_verify gost2012_256-A md_gost12_256 0x030212K0040
+sign_verify gost2012_256-B md_gost12_256 0x030212K0040
+sign_verify gost2012_256-C md_gost12_256 0x030212K0040
+sign_verify gost2012_512-A md_gost12_512 0x030213K0080
+sign_verify gost2012_512-B md_gost12_512 0x030213K0080
+# Test if signing with wrong key length does not work.
+expect_fail \
+ check_sign TYPE=ima KEY=gost2012_512-B ALG=md_gost12_256 PREF=0x0302 OPTS=
+expect_fail \
+ check_sign TYPE=ima KEY=gost2012_256-B ALG=md_gost12_512 PREF=0x0302 OPTS=
+
Run `make check' to execute the tests. Currently only ima_hash, (evm) sign, (evm) verify, ima_sign, and ima_verify are tested. Signed-off-by: Vitaly Chikunov <vt@altlinux.org> --- Changelog since v5: - Fix tests if gost-engine is not present. Thx to Mimi Zohar for testing on Xenial. Changelog since v4: - Fix bugs found by Mimi Zohar: - Fix typos in variable names - Fix `-out -' in asn1parse for openssl 1.0.x Changelog since v3: - Apply changes based on some suggestions from Petr Vorel, such as - Add .gitignore - Do not color output if stdout is not tty. - Fix blkid error with --uuid option. - Remove or change some comments - Replace ENGINE with EVMCTL_ENGINE and OPENSSL_ENGINE. - All tests pass over next branch. Changelog since v2: - ima_sign.test and ima_verify.test merged into sign_verify.test which is also able to test evm signatures. - Apply Mimi Zohar suggestions regarding commenting, variable renaming, code rearranging, etc. with intent to simplify the code and review. Changelog since v1: - Apply suggestions by Petr Vorel: - Rename function names and variables to be more understandable. - Rename tests/functions to tests/functions.sh. - Define exit codes (77, 99, ...) as variables. - Added more comments and remove single letter variables (for Mimi Zohar). - Move getfattr check into function. - Move evmctl run and check into single function. - Add sign/verify tests for v1 signatures. - Minor improvements. - Since I still edit all 5 files I did not split the patch into multiple commits to separate the files, otherwise editing will become too complicated, as I ought to continuously rebase and edit different commits. This was really non-productive suggestion. .gitignore | 2 +- Makefile.am | 2 +- configure.ac | 1 + tests/.gitignore | 16 +++ tests/Makefile.am | 12 ++ tests/functions.sh | 272 +++++++++++++++++++++++++++++++++++++ tests/gen-keys.sh | 93 +++++++++++++ tests/ima_hash.test | 71 ++++++++++ tests/sign_verify.test | 359 +++++++++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 826 insertions(+), 2 deletions(-) create mode 100644 tests/.gitignore create mode 100644 tests/Makefile.am create mode 100755 tests/functions.sh create mode 100755 tests/gen-keys.sh create mode 100755 tests/ima_hash.test create mode 100755 tests/sign_verify.test