diff mbox series

[v2] tpm: ibmvtpm: Avoid error message when process gets signal while waiting

Message ID 20210803202622.1537040-1-stefanb@linux.vnet.ibm.com (mailing list archive)
State New, archived
Headers show
Series [v2] tpm: ibmvtpm: Avoid error message when process gets signal while waiting | expand

Commit Message

Stefan Berger Aug. 3, 2021, 8:26 p.m. UTC 
From: Stefan Berger <stefanb@linux.ibm.com>

When rngd is run as root then lots of these types of message will appear
in the kernel log if the TPM has been configured to provide random bytes:

[ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4

The issue is caused by the following call that is interrupted while
waiting for the TPM's response.

sig = wait_event_interruptible(ibmvtpm->wq,
                               !ibmvtpm->tpm_processing_cmd);

Rather than waiting for the response in the low level driver, have it use
the polling loop in tpm_try_transmit() that uses a command's duration to
poll until a result has been returned by the TPM, thus ending when the
timeout has occurred but not responding to signals and ctrl-c anymore. To
stay in this polling loop extend tpm_ibmvtpm_status() to return
TPM_STATUS_BUSY for as long as the vTPM is busy. Since the loop requires
the TPM's timeouts, get them now using tpm_get_timeouts() after setting
the TPM2 version flag on the chip.

Rename the tpm_processing_cmd to tpm_status in ibmvtpm_dev and set the
TPM_STATUS_BUSY flag while the vTPM is busy processing a command.

To recreat the resolved issue start rngd like this:

sudo rngd -r /dev/hwrng -t
sudo rngd -r /dev/tpm0 -t

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1981473
Fixes: 6674ff145eef ("tpm_ibmvtpm: properly handle interrupted packet receptions")
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: George Wilson <gcwilson@linux.ibm.com>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>

---

v2:
 - reworded commit text
---
 drivers/char/tpm/tpm_ibmvtpm.c | 31 ++++++++++++++++++-------------
 drivers/char/tpm/tpm_ibmvtpm.h |  3 ++-
 2 files changed, 20 insertions(+), 14 deletions(-)

Comments

R Nageswara Sastry Aug. 4, 2021, 5:30 a.m. UTC | #1 
On 04/08/21 1:56 am, Stefan Berger wrote:
> From: Stefan Berger <stefanb@linux.ibm.com>
> 
> When rngd is run as root then lots of these types of message will appear
> in the kernel log if the TPM has been configured to provide random bytes:
> 
> [ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4
> 
> The issue is caused by the following call that is interrupted while
> waiting for the TPM's response.
> 
> sig = wait_event_interruptible(ibmvtpm->wq,
>                                 !ibmvtpm->tpm_processing_cmd);
> 
> Rather than waiting for the response in the low level driver, have it use
> the polling loop in tpm_try_transmit() that uses a command's duration to
> poll until a result has been returned by the TPM, thus ending when the
> timeout has occurred but not responding to signals and ctrl-c anymore. To
> stay in this polling loop extend tpm_ibmvtpm_status() to return
> TPM_STATUS_BUSY for as long as the vTPM is busy. Since the loop requires
> the TPM's timeouts, get them now using tpm_get_timeouts() after setting
> the TPM2 version flag on the chip.
> 
> Rename the tpm_processing_cmd to tpm_status in ibmvtpm_dev and set the
> TPM_STATUS_BUSY flag while the vTPM is busy processing a command.
> 
> To recreat the resolved issue start rngd like this:
> 
> sudo rngd -r /dev/hwrng -t
> sudo rngd -r /dev/tpm0 -t
> 
> Link: https://bugzilla.redhat.com/show_bug.cgi?id=1981473
> Fixes: 6674ff145eef ("tpm_ibmvtpm: properly handle interrupted packet receptions")
> Cc: Nayna Jain <nayna@linux.ibm.com>
> Cc: George Wilson <gcwilson@linux.ibm.com>
> Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
> 

Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>

Tested the patch applying on kernel version 5.14.0-rc3

1. Ran with recreate commands i.e.
rngd -r /dev/hwrng -t
rngd -r /dev/tpm0 -t

2. Ran the above rngd commands along with "stress-ng - dispatching hogs: 
32 af-alg, 32 bsearch, 32 context, 32 cpu, 32 crypt, 32 hsearch, 32 
longjmp, 32 lsearch, 32 matrix, 32 qsort, 32 str, 32 stream, 32 tsearch, 
32 vecmath, 32 wcs" for 2 hours

Thanks!!
> ---
> 
> v2:
>   - reworded commit text
> ---
>   drivers/char/tpm/tpm_ibmvtpm.c | 31 ++++++++++++++++++-------------
>   drivers/char/tpm/tpm_ibmvtpm.h |  3 ++-
>   2 files changed, 20 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
> index 903604769de9..5d795866b483 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.c
> +++ b/drivers/char/tpm/tpm_ibmvtpm.c
> @@ -106,17 +106,12 @@ static int tpm_ibmvtpm_recv(struct tpm_chip *chip, u8 *buf, size_t count)
>   {
>   	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
>   	u16 len;
> -	int sig;
>   
>   	if (!ibmvtpm->rtce_buf) {
>   		dev_err(ibmvtpm->dev, "ibmvtpm device is not ready\n");
>   		return 0;
>   	}
>   
> -	sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
> -	if (sig)
> -		return -EINTR;
> -
>   	len = ibmvtpm->res_len;
>   
>   	if (count < len) {
> @@ -220,11 +215,12 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
>   		return -EIO;
>   	}
>   
> -	if (ibmvtpm->tpm_processing_cmd) {
> +	if ((ibmvtpm->tpm_status & TPM_STATUS_BUSY)) {
>   		dev_info(ibmvtpm->dev,
>   		         "Need to wait for TPM to finish\n");
>   		/* wait for previous command to finish */
> -		sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
> +		sig = wait_event_interruptible(ibmvtpm->wq,
> +				(ibmvtpm->tpm_status & TPM_STATUS_BUSY) == 0);
>   		if (sig)
>   			return -EINTR;
>   	}
> @@ -237,7 +233,7 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
>   	 * set the processing flag before the Hcall, since we may get the
>   	 * result (interrupt) before even being able to check rc.
>   	 */
> -	ibmvtpm->tpm_processing_cmd = true;
> +	ibmvtpm->tpm_status |= TPM_STATUS_BUSY;
>   
>   again:
>   	rc = ibmvtpm_send_crq(ibmvtpm->vdev,
> @@ -255,7 +251,7 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
>   			goto again;
>   		}
>   		dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
> -		ibmvtpm->tpm_processing_cmd = false;
> +		ibmvtpm->tpm_status &= ~TPM_STATUS_BUSY;
>   	}
>   
>   	spin_unlock(&ibmvtpm->rtce_lock);
> @@ -269,7 +265,9 @@ static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
>   
>   static u8 tpm_ibmvtpm_status(struct tpm_chip *chip)
>   {
> -	return 0;
> +	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
> +
> +	return ibmvtpm->tpm_status;
>   }
>   
>   /**
> @@ -457,7 +455,7 @@ static const struct tpm_class_ops tpm_ibmvtpm = {
>   	.send = tpm_ibmvtpm_send,
>   	.cancel = tpm_ibmvtpm_cancel,
>   	.status = tpm_ibmvtpm_status,
> -	.req_complete_mask = 0,
> +	.req_complete_mask = TPM_STATUS_BUSY,
>   	.req_complete_val = 0,
>   	.req_canceled = tpm_ibmvtpm_req_canceled,
>   };
> @@ -550,7 +548,7 @@ static void ibmvtpm_crq_process(struct ibmvtpm_crq *crq,
>   		case VTPM_TPM_COMMAND_RES:
>   			/* len of the data in rtce buffer */
>   			ibmvtpm->res_len = be16_to_cpu(crq->len);
> -			ibmvtpm->tpm_processing_cmd = false;
> +			ibmvtpm->tpm_status &= ~TPM_STATUS_BUSY;
>   			wake_up_interruptible(&ibmvtpm->wq);
>   			return;
>   		default:
> @@ -688,8 +686,15 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
>   		goto init_irq_cleanup;
>   	}
>   
> -	if (!strcmp(id->compat, "IBM,vtpm20")) {
> +
> +	if (!strcmp(id->compat, "IBM,vtpm20"))
>   		chip->flags |= TPM_CHIP_FLAG_TPM2;
> +
> +	rc = tpm_get_timeouts(chip);
> +	if (rc)
> +		goto init_irq_cleanup;
> +
> +	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
>   		rc = tpm2_get_cc_attrs_tbl(chip);
>   		if (rc)
>   			goto init_irq_cleanup;
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.h b/drivers/char/tpm/tpm_ibmvtpm.h
> index b92aa7d3e93e..252f1cccdfc5 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.h
> +++ b/drivers/char/tpm/tpm_ibmvtpm.h
> @@ -41,7 +41,8 @@ struct ibmvtpm_dev {
>   	wait_queue_head_t wq;
>   	u16 res_len;
>   	u32 vtpm_version;
> -	bool tpm_processing_cmd;
> +	u8 tpm_status;
> +#define TPM_STATUS_BUSY		(1 << 0) /* vtpm is processing a command */
>   };
>   
>   #define CRQ_RES_BUF_SIZE	PAGE_SIZE
>
Jarkko Sakkinen Aug. 5, 2021, 8:44 p.m. UTC | #2 
On Tue, Aug 03, 2021 at 04:26:22PM -0400, Stefan Berger wrote:
> From: Stefan Berger <stefanb@linux.ibm.com>
> 
> When rngd is run as root then lots of these types of message will appear
> in the kernel log if the TPM has been configured to provide random bytes:
> 
> [ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4
> 
> The issue is caused by the following call that is interrupted while
> waiting for the TPM's response.
> 
> sig = wait_event_interruptible(ibmvtpm->wq,
>                                !ibmvtpm->tpm_processing_cmd);
> 
> Rather than waiting for the response in the low level driver, have it use
> the polling loop in tpm_try_transmit() that uses a command's duration to
> poll until a result has been returned by the TPM, thus ending when the
> timeout has occurred but not responding to signals and ctrl-c anymore. To
> stay in this polling loop extend tpm_ibmvtpm_status() to return
> TPM_STATUS_BUSY for as long as the vTPM is busy. Since the loop requires
> the TPM's timeouts, get them now using tpm_get_timeouts() after setting
> the TPM2 version flag on the chip.
> 
> Rename the tpm_processing_cmd to tpm_status in ibmvtpm_dev and set the
> TPM_STATUS_BUSY flag while the vTPM is busy processing a command.
> 
> To recreat the resolved issue start rngd like this:
> 
> sudo rngd -r /dev/hwrng -t
> sudo rngd -r /dev/tpm0 -t
> 
> Link: https://bugzilla.redhat.com/show_bug.cgi?id=1981473
> Fixes: 6674ff145eef ("tpm_ibmvtpm: properly handle interrupted packet receptions")
> Cc: Nayna Jain <nayna@linux.ibm.com>
> Cc: George Wilson <gcwilson@linux.ibm.com>
> Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
> 
> ---
> 
> v2:
>  - reworded commit text
> ---
>  drivers/char/tpm/tpm_ibmvtpm.c | 31 ++++++++++++++++++-------------
>  drivers/char/tpm/tpm_ibmvtpm.h |  3 ++-
>  2 files changed, 20 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
> index 903604769de9..5d795866b483 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.c
> +++ b/drivers/char/tpm/tpm_ibmvtpm.c
> @@ -106,17 +106,12 @@ static int tpm_ibmvtpm_recv(struct tpm_chip *chip, u8 *buf, size_t count)
>  {
>  	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
>  	u16 len;
> -	int sig;
>  
>  	if (!ibmvtpm->rtce_buf) {
>  		dev_err(ibmvtpm->dev, "ibmvtpm device is not ready\n");
>  		return 0;
>  	}
>  
> -	sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
> -	if (sig)
> -		return -EINTR;
> -
>  	len = ibmvtpm->res_len;
>  
>  	if (count < len) {
> @@ -220,11 +215,12 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
>  		return -EIO;
>  	}
>  
> -	if (ibmvtpm->tpm_processing_cmd) {
> +	if ((ibmvtpm->tpm_status & TPM_STATUS_BUSY)) {
>  		dev_info(ibmvtpm->dev,
>  		         "Need to wait for TPM to finish\n");
>  		/* wait for previous command to finish */
> -		sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
> +		sig = wait_event_interruptible(ibmvtpm->wq,
> +				(ibmvtpm->tpm_status & TPM_STATUS_BUSY) == 0);
>  		if (sig)
>  			return -EINTR;
>  	}
> @@ -237,7 +233,7 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
>  	 * set the processing flag before the Hcall, since we may get the
>  	 * result (interrupt) before even being able to check rc.
>  	 */
> -	ibmvtpm->tpm_processing_cmd = true;
> +	ibmvtpm->tpm_status |= TPM_STATUS_BUSY;
>  
>  again:
>  	rc = ibmvtpm_send_crq(ibmvtpm->vdev,
> @@ -255,7 +251,7 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
>  			goto again;
>  		}
>  		dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
> -		ibmvtpm->tpm_processing_cmd = false;
> +		ibmvtpm->tpm_status &= ~TPM_STATUS_BUSY;
>  	}
>  
>  	spin_unlock(&ibmvtpm->rtce_lock);
> @@ -269,7 +265,9 @@ static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
>  
>  static u8 tpm_ibmvtpm_status(struct tpm_chip *chip)
>  {
> -	return 0;
> +	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
> +
> +	return ibmvtpm->tpm_status;
>  }
>  
>  /**
> @@ -457,7 +455,7 @@ static const struct tpm_class_ops tpm_ibmvtpm = {
>  	.send = tpm_ibmvtpm_send,
>  	.cancel = tpm_ibmvtpm_cancel,
>  	.status = tpm_ibmvtpm_status,
> -	.req_complete_mask = 0,
> +	.req_complete_mask = TPM_STATUS_BUSY,
>  	.req_complete_val = 0,
>  	.req_canceled = tpm_ibmvtpm_req_canceled,
>  };
> @@ -550,7 +548,7 @@ static void ibmvtpm_crq_process(struct ibmvtpm_crq *crq,
>  		case VTPM_TPM_COMMAND_RES:
>  			/* len of the data in rtce buffer */
>  			ibmvtpm->res_len = be16_to_cpu(crq->len);
> -			ibmvtpm->tpm_processing_cmd = false;
> +			ibmvtpm->tpm_status &= ~TPM_STATUS_BUSY;
>  			wake_up_interruptible(&ibmvtpm->wq);
>  			return;
>  		default:
> @@ -688,8 +686,15 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
>  		goto init_irq_cleanup;
>  	}
>  
> -	if (!strcmp(id->compat, "IBM,vtpm20")) {
> +
> +	if (!strcmp(id->compat, "IBM,vtpm20"))
>  		chip->flags |= TPM_CHIP_FLAG_TPM2;
> +
> +	rc = tpm_get_timeouts(chip);
> +	if (rc)
> +		goto init_irq_cleanup;
> +
> +	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
>  		rc = tpm2_get_cc_attrs_tbl(chip);
>  		if (rc)
>  			goto init_irq_cleanup;
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.h b/drivers/char/tpm/tpm_ibmvtpm.h
> index b92aa7d3e93e..252f1cccdfc5 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.h
> +++ b/drivers/char/tpm/tpm_ibmvtpm.h
> @@ -41,7 +41,8 @@ struct ibmvtpm_dev {
>  	wait_queue_head_t wq;
>  	u16 res_len;
>  	u32 vtpm_version;
> -	bool tpm_processing_cmd;
> +	u8 tpm_status;
> +#define TPM_STATUS_BUSY		(1 << 0) /* vtpm is processing a command */
>  };
>  
>  #define CRQ_RES_BUF_SIZE	PAGE_SIZE
> -- 
> 2.31.1
> 
> 

Please do not do the rename in the bug fix. If you really want to rename,
then this must be split into two commits.

/Jarkko
diff mbox series

Patch

diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
index 903604769de9..5d795866b483 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -106,17 +106,12 @@  static int tpm_ibmvtpm_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
 	u16 len;
-	int sig;
 
 	if (!ibmvtpm->rtce_buf) {
 		dev_err(ibmvtpm->dev, "ibmvtpm device is not ready\n");
 		return 0;
 	}
 
-	sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
-	if (sig)
-		return -EINTR;
-
 	len = ibmvtpm->res_len;
 
 	if (count < len) {
@@ -220,11 +215,12 @@  static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
 		return -EIO;
 	}
 
-	if (ibmvtpm->tpm_processing_cmd) {
+	if ((ibmvtpm->tpm_status & TPM_STATUS_BUSY)) {
 		dev_info(ibmvtpm->dev,
 		         "Need to wait for TPM to finish\n");
 		/* wait for previous command to finish */
-		sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
+		sig = wait_event_interruptible(ibmvtpm->wq,
+				(ibmvtpm->tpm_status & TPM_STATUS_BUSY) == 0);
 		if (sig)
 			return -EINTR;
 	}
@@ -237,7 +233,7 @@  static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
 	 * set the processing flag before the Hcall, since we may get the
 	 * result (interrupt) before even being able to check rc.
 	 */
-	ibmvtpm->tpm_processing_cmd = true;
+	ibmvtpm->tpm_status |= TPM_STATUS_BUSY;
 
 again:
 	rc = ibmvtpm_send_crq(ibmvtpm->vdev,
@@ -255,7 +251,7 @@  static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
 			goto again;
 		}
 		dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
-		ibmvtpm->tpm_processing_cmd = false;
+		ibmvtpm->tpm_status &= ~TPM_STATUS_BUSY;
 	}
 
 	spin_unlock(&ibmvtpm->rtce_lock);
@@ -269,7 +265,9 @@  static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
 
 static u8 tpm_ibmvtpm_status(struct tpm_chip *chip)
 {
-	return 0;
+	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+
+	return ibmvtpm->tpm_status;
 }
 
 /**
@@ -457,7 +455,7 @@  static const struct tpm_class_ops tpm_ibmvtpm = {
 	.send = tpm_ibmvtpm_send,
 	.cancel = tpm_ibmvtpm_cancel,
 	.status = tpm_ibmvtpm_status,
-	.req_complete_mask = 0,
+	.req_complete_mask = TPM_STATUS_BUSY,
 	.req_complete_val = 0,
 	.req_canceled = tpm_ibmvtpm_req_canceled,
 };
@@ -550,7 +548,7 @@  static void ibmvtpm_crq_process(struct ibmvtpm_crq *crq,
 		case VTPM_TPM_COMMAND_RES:
 			/* len of the data in rtce buffer */
 			ibmvtpm->res_len = be16_to_cpu(crq->len);
-			ibmvtpm->tpm_processing_cmd = false;
+			ibmvtpm->tpm_status &= ~TPM_STATUS_BUSY;
 			wake_up_interruptible(&ibmvtpm->wq);
 			return;
 		default:
@@ -688,8 +686,15 @@  static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
 		goto init_irq_cleanup;
 	}
 
-	if (!strcmp(id->compat, "IBM,vtpm20")) {
+
+	if (!strcmp(id->compat, "IBM,vtpm20"))
 		chip->flags |= TPM_CHIP_FLAG_TPM2;
+
+	rc = tpm_get_timeouts(chip);
+	if (rc)
+		goto init_irq_cleanup;
+
+	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
 		rc = tpm2_get_cc_attrs_tbl(chip);
 		if (rc)
 			goto init_irq_cleanup;
diff --git a/drivers/char/tpm/tpm_ibmvtpm.h b/drivers/char/tpm/tpm_ibmvtpm.h
index b92aa7d3e93e..252f1cccdfc5 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.h
+++ b/drivers/char/tpm/tpm_ibmvtpm.h
@@ -41,7 +41,8 @@  struct ibmvtpm_dev {
 	wait_queue_head_t wq;
 	u16 res_len;
 	u32 vtpm_version;
-	bool tpm_processing_cmd;
+	u8 tpm_status;
+#define TPM_STATUS_BUSY		(1 << 0) /* vtpm is processing a command */
 };
 
 #define CRQ_RES_BUF_SIZE	PAGE_SIZE