| Message ID | 20211124141314.1356338-2-stefanb@linux.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | selftests: tpm2: Probe for available PCR bank | expand |
On Wed, Nov 24, 2021 at 09:13:12AM -0500, Stefan Berger wrote: > Probe for an available PCR bank to accommodate devices that do not have a > SHA-1 PCR bank or whose SHA-1 bank is deactivated. Use the bank that can > be used in the TPM2 commands. Assert on the probing function to not > return None. What is *the bank* that can be used? In addition, I don't understand the last sentence. /Jarkko > > Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> > --- > tools/testing/selftests/tpm2/tpm2_tests.py | 35 +++++++++++++++++----- > 1 file changed, 27 insertions(+), 8 deletions(-) > > diff --git a/tools/testing/selftests/tpm2/tpm2_tests.py b/tools/testing/selftests/tpm2/tpm2_tests.py > index 9d764306887b..6b88ff0e47b9 100644 > --- a/tools/testing/selftests/tpm2/tpm2_tests.py > +++ b/tools/testing/selftests/tpm2/tpm2_tests.py > @@ -27,7 +27,23 @@ class SmokeTest(unittest.TestCase): > result = self.client.unseal(self.root_key, blob, auth, None) > self.assertEqual(data, result) > > + def determine_bank_alg(self): > + # Probe for available PCR bank > + for bank_alg in [tpm2.TPM2_ALG_SHA1, tpm2.TPM2_ALG_SHA256]: > + try: > + handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) > + self.client.policy_pcr(handle, [17], bank_alg=bank_alg) > + return bank_alg > + except tpm2.UnknownPCRBankError: > + pass > + finally: > + self.client.flush_context(handle) > + return None > + > def test_seal_with_policy(self): > + bank_alg = self.determine_bank_alg() > + self.assertIsNotNone(bank_alg) > + > handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) > > data = ('X' * 64).encode() > @@ -35,7 +51,7 @@ class SmokeTest(unittest.TestCase): > pcrs = [16] > > try: > - self.client.policy_pcr(handle, pcrs) > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > self.client.policy_password(handle) > > policy_dig = self.client.get_policy_digest(handle) > @@ -47,7 +63,7 @@ class SmokeTest(unittest.TestCase): > handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) > > try: > - self.client.policy_pcr(handle, pcrs) > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > self.client.policy_password(handle) > > result = self.client.unseal(self.root_key, blob, auth, handle) > @@ -72,6 +88,9 @@ class SmokeTest(unittest.TestCase): > self.assertEqual(rc, tpm2.TPM2_RC_AUTH_FAIL) > > def test_unseal_with_wrong_policy(self): > + bank_alg = self.determine_bank_alg() > + self.assertIsNotNone(bank_alg) > + > handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) > > data = ('X' * 64).encode() > @@ -79,7 +98,7 @@ class SmokeTest(unittest.TestCase): > pcrs = [16] > > try: > - self.client.policy_pcr(handle, pcrs) > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > self.client.policy_password(handle) > > policy_dig = self.client.get_policy_digest(handle) > @@ -91,13 +110,13 @@ class SmokeTest(unittest.TestCase): > # Extend first a PCR that is not part of the policy and try to unseal. > # This should succeed. > > - ds = tpm2.get_digest_size(tpm2.TPM2_ALG_SHA1) > - self.client.extend_pcr(1, ('X' * ds).encode()) > + ds = tpm2.get_digest_size(bank_alg) > + self.client.extend_pcr(1, ('X' * ds).encode(), bank_alg=bank_alg) > > handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) > > try: > - self.client.policy_pcr(handle, pcrs) > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > self.client.policy_password(handle) > > result = self.client.unseal(self.root_key, blob, auth, handle) > @@ -109,14 +128,14 @@ class SmokeTest(unittest.TestCase): > > # Then, extend a PCR that is part of the policy and try to unseal. > # This should fail. > - self.client.extend_pcr(16, ('X' * ds).encode()) > + self.client.extend_pcr(16, ('X' * ds).encode(), bank_alg=bank_alg) > > handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) > > rc = 0 > > try: > - self.client.policy_pcr(handle, pcrs) > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > self.client.policy_password(handle) > > result = self.client.unseal(self.root_key, blob, auth, handle) > -- > 2.31.1 >
On 11/24/21 18:54, Jarkko Sakkinen wrote: > On Wed, Nov 24, 2021 at 09:13:12AM -0500, Stefan Berger wrote: >> Probe for an available PCR bank to accommodate devices that do not have a >> SHA-1 PCR bank or whose SHA-1 bank is deactivated. Use the bank that can >> be used in the TPM2 commands. Assert on the probing function to not >> return None. > What is *the bank* that can be used? The bank can be either SHA-1 or SHA-256 at this point. > > In addition, I don't understand the last sentence. If the probing function returns None the test fails due to an assertIsNotNone(). stefan > > /Jarkko > > >> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> >> --- >> tools/testing/selftests/tpm2/tpm2_tests.py | 35 +++++++++++++++++----- >> 1 file changed, 27 insertions(+), 8 deletions(-) >> >> diff --git a/tools/testing/selftests/tpm2/tpm2_tests.py b/tools/testing/selftests/tpm2/tpm2_tests.py >> index 9d764306887b..6b88ff0e47b9 100644 >> --- a/tools/testing/selftests/tpm2/tpm2_tests.py >> +++ b/tools/testing/selftests/tpm2/tpm2_tests.py >> @@ -27,7 +27,23 @@ class SmokeTest(unittest.TestCase): >> result = self.client.unseal(self.root_key, blob, auth, None) >> self.assertEqual(data, result) >> >> + def determine_bank_alg(self): >> + # Probe for available PCR bank >> + for bank_alg in [tpm2.TPM2_ALG_SHA1, tpm2.TPM2_ALG_SHA256]: >> + try: >> + handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) >> + self.client.policy_pcr(handle, [17], bank_alg=bank_alg) >> + return bank_alg >> + except tpm2.UnknownPCRBankError: >> + pass >> + finally: >> + self.client.flush_context(handle) >> + return None >> + >> def test_seal_with_policy(self): >> + bank_alg = self.determine_bank_alg() >> + self.assertIsNotNone(bank_alg) >> + >> handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) >> >> data = ('X' * 64).encode() >> @@ -35,7 +51,7 @@ class SmokeTest(unittest.TestCase): >> pcrs = [16] >> >> try: >> - self.client.policy_pcr(handle, pcrs) >> + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) >> self.client.policy_password(handle) >> >> policy_dig = self.client.get_policy_digest(handle) >> @@ -47,7 +63,7 @@ class SmokeTest(unittest.TestCase): >> handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) >> >> try: >> - self.client.policy_pcr(handle, pcrs) >> + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) >> self.client.policy_password(handle) >> >> result = self.client.unseal(self.root_key, blob, auth, handle) >> @@ -72,6 +88,9 @@ class SmokeTest(unittest.TestCase): >> self.assertEqual(rc, tpm2.TPM2_RC_AUTH_FAIL) >> >> def test_unseal_with_wrong_policy(self): >> + bank_alg = self.determine_bank_alg() >> + self.assertIsNotNone(bank_alg) >> + >> handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) >> >> data = ('X' * 64).encode() >> @@ -79,7 +98,7 @@ class SmokeTest(unittest.TestCase): >> pcrs = [16] >> >> try: >> - self.client.policy_pcr(handle, pcrs) >> + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) >> self.client.policy_password(handle) >> >> policy_dig = self.client.get_policy_digest(handle) >> @@ -91,13 +110,13 @@ class SmokeTest(unittest.TestCase): >> # Extend first a PCR that is not part of the policy and try to unseal. >> # This should succeed. >> >> - ds = tpm2.get_digest_size(tpm2.TPM2_ALG_SHA1) >> - self.client.extend_pcr(1, ('X' * ds).encode()) >> + ds = tpm2.get_digest_size(bank_alg) >> + self.client.extend_pcr(1, ('X' * ds).encode(), bank_alg=bank_alg) >> >> handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) >> >> try: >> - self.client.policy_pcr(handle, pcrs) >> + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) >> self.client.policy_password(handle) >> >> result = self.client.unseal(self.root_key, blob, auth, handle) >> @@ -109,14 +128,14 @@ class SmokeTest(unittest.TestCase): >> >> # Then, extend a PCR that is part of the policy and try to unseal. >> # This should fail. >> - self.client.extend_pcr(16, ('X' * ds).encode()) >> + self.client.extend_pcr(16, ('X' * ds).encode(), bank_alg=bank_alg) >> >> handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) >> >> rc = 0 >> >> try: >> - self.client.policy_pcr(handle, pcrs) >> + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) >> self.client.policy_password(handle) >> >> result = self.client.unseal(self.root_key, blob, auth, handle) >> -- >> 2.31.1 >>
On Wed, 2021-11-24 at 19:15 -0500, Stefan Berger wrote: > > On 11/24/21 18:54, Jarkko Sakkinen wrote: > > On Wed, Nov 24, 2021 at 09:13:12AM -0500, Stefan Berger wrote: > > > Probe for an available PCR bank to accommodate devices that do not have a > > > SHA-1 PCR bank or whose SHA-1 bank is deactivated. Use the bank that can > > > be used in the TPM2 commands. Assert on the probing function to not > > > return None. > > What is *the bank* that can be used? > > The bank can be either SHA-1 or SHA-256 at this point. > > > > > In addition, I don't understand the last sentence. > > > If the probing function returns None the test fails due to an > assertIsNotNone(). You should have all this written down to the commit message. /Jarkko > > stefan > > > > > /Jarkko > > > > > > > Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> > > > --- > > > tools/testing/selftests/tpm2/tpm2_tests.py | 35 +++++++++++++++++----- > > > 1 file changed, 27 insertions(+), 8 deletions(-) > > > > > > diff --git a/tools/testing/selftests/tpm2/tpm2_tests.py b/tools/testing/selftests/tpm2/tpm2_tests.py > > > index 9d764306887b..6b88ff0e47b9 100644 > > > --- a/tools/testing/selftests/tpm2/tpm2_tests.py > > > +++ b/tools/testing/selftests/tpm2/tpm2_tests.py > > > @@ -27,7 +27,23 @@ class SmokeTest(unittest.TestCase): > > > result = self.client.unseal(self.root_key, blob, auth, None) > > > self.assertEqual(data, result) > > > > > > + def determine_bank_alg(self): > > > + # Probe for available PCR bank > > > + for bank_alg in [tpm2.TPM2_ALG_SHA1, tpm2.TPM2_ALG_SHA256]: > > > + try: > > > + handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) > > > + self.client.policy_pcr(handle, [17], bank_alg=bank_alg) > > > + return bank_alg > > > + except tpm2.UnknownPCRBankError: > > > + pass > > > + finally: > > > + self.client.flush_context(handle) > > > + return None > > > + > > > def test_seal_with_policy(self): > > > + bank_alg = self.determine_bank_alg() > > > + self.assertIsNotNone(bank_alg) > > > + > > > handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) > > > > > > data = ('X' * 64).encode() > > > @@ -35,7 +51,7 @@ class SmokeTest(unittest.TestCase): > > > pcrs = [16] > > > > > > try: > > > - self.client.policy_pcr(handle, pcrs) > > > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > > > self.client.policy_password(handle) > > > > > > policy_dig = self.client.get_policy_digest(handle) > > > @@ -47,7 +63,7 @@ class SmokeTest(unittest.TestCase): > > > handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) > > > > > > try: > > > - self.client.policy_pcr(handle, pcrs) > > > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > > > self.client.policy_password(handle) > > > > > > result = self.client.unseal(self.root_key, blob, auth, handle) > > > @@ -72,6 +88,9 @@ class SmokeTest(unittest.TestCase): > > > self.assertEqual(rc, tpm2.TPM2_RC_AUTH_FAIL) > > > > > > def test_unseal_with_wrong_policy(self): > > > + bank_alg = self.determine_bank_alg() > > > + self.assertIsNotNone(bank_alg) > > > + > > > handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) > > > > > > data = ('X' * 64).encode() > > > @@ -79,7 +98,7 @@ class SmokeTest(unittest.TestCase): > > > pcrs = [16] > > > > > > try: > > > - self.client.policy_pcr(handle, pcrs) > > > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > > > self.client.policy_password(handle) > > > > > > policy_dig = self.client.get_policy_digest(handle) > > > @@ -91,13 +110,13 @@ class SmokeTest(unittest.TestCase): > > > # Extend first a PCR that is not part of the policy and try to unseal. > > > # This should succeed. > > > > > > - ds = tpm2.get_digest_size(tpm2.TPM2_ALG_SHA1) > > > - self.client.extend_pcr(1, ('X' * ds).encode()) > > > + ds = tpm2.get_digest_size(bank_alg) > > > + self.client.extend_pcr(1, ('X' * ds).encode(), bank_alg=bank_alg) > > > > > > handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) > > > > > > try: > > > - self.client.policy_pcr(handle, pcrs) > > > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > > > self.client.policy_password(handle) > > > > > > result = self.client.unseal(self.root_key, blob, auth, handle) > > > @@ -109,14 +128,14 @@ class SmokeTest(unittest.TestCase): > > > > > > # Then, extend a PCR that is part of the policy and try to unseal. > > > # This should fail. > > > - self.client.extend_pcr(16, ('X' * ds).encode()) > > > + self.client.extend_pcr(16, ('X' * ds).encode(), bank_alg=bank_alg) > > > > > > handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) > > > > > > rc = 0 > > > > > > try: > > > - self.client.policy_pcr(handle, pcrs) > > > + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) > > > self.client.policy_password(handle) > > > > > > result = self.client.unseal(self.root_key, blob, auth, handle) > > > -- > > > 2.31.1 > > >
diff --git a/tools/testing/selftests/tpm2/tpm2_tests.py b/tools/testing/selftests/tpm2/tpm2_tests.py index 9d764306887b..6b88ff0e47b9 100644 --- a/tools/testing/selftests/tpm2/tpm2_tests.py +++ b/tools/testing/selftests/tpm2/tpm2_tests.py @@ -27,7 +27,23 @@ class SmokeTest(unittest.TestCase): result = self.client.unseal(self.root_key, blob, auth, None) self.assertEqual(data, result) + def determine_bank_alg(self): + # Probe for available PCR bank + for bank_alg in [tpm2.TPM2_ALG_SHA1, tpm2.TPM2_ALG_SHA256]: + try: + handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) + self.client.policy_pcr(handle, [17], bank_alg=bank_alg) + return bank_alg + except tpm2.UnknownPCRBankError: + pass + finally: + self.client.flush_context(handle) + return None + def test_seal_with_policy(self): + bank_alg = self.determine_bank_alg() + self.assertIsNotNone(bank_alg) + handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) data = ('X' * 64).encode() @@ -35,7 +51,7 @@ class SmokeTest(unittest.TestCase): pcrs = [16] try: - self.client.policy_pcr(handle, pcrs) + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) self.client.policy_password(handle) policy_dig = self.client.get_policy_digest(handle) @@ -47,7 +63,7 @@ class SmokeTest(unittest.TestCase): handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) try: - self.client.policy_pcr(handle, pcrs) + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) self.client.policy_password(handle) result = self.client.unseal(self.root_key, blob, auth, handle) @@ -72,6 +88,9 @@ class SmokeTest(unittest.TestCase): self.assertEqual(rc, tpm2.TPM2_RC_AUTH_FAIL) def test_unseal_with_wrong_policy(self): + bank_alg = self.determine_bank_alg() + self.assertIsNotNone(bank_alg) + handle = self.client.start_auth_session(tpm2.TPM2_SE_TRIAL) data = ('X' * 64).encode() @@ -79,7 +98,7 @@ class SmokeTest(unittest.TestCase): pcrs = [16] try: - self.client.policy_pcr(handle, pcrs) + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) self.client.policy_password(handle) policy_dig = self.client.get_policy_digest(handle) @@ -91,13 +110,13 @@ class SmokeTest(unittest.TestCase): # Extend first a PCR that is not part of the policy and try to unseal. # This should succeed. - ds = tpm2.get_digest_size(tpm2.TPM2_ALG_SHA1) - self.client.extend_pcr(1, ('X' * ds).encode()) + ds = tpm2.get_digest_size(bank_alg) + self.client.extend_pcr(1, ('X' * ds).encode(), bank_alg=bank_alg) handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) try: - self.client.policy_pcr(handle, pcrs) + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) self.client.policy_password(handle) result = self.client.unseal(self.root_key, blob, auth, handle) @@ -109,14 +128,14 @@ class SmokeTest(unittest.TestCase): # Then, extend a PCR that is part of the policy and try to unseal. # This should fail. - self.client.extend_pcr(16, ('X' * ds).encode()) + self.client.extend_pcr(16, ('X' * ds).encode(), bank_alg=bank_alg) handle = self.client.start_auth_session(tpm2.TPM2_SE_POLICY) rc = 0 try: - self.client.policy_pcr(handle, pcrs) + self.client.policy_pcr(handle, pcrs, bank_alg=bank_alg) self.client.policy_password(handle) result = self.client.unseal(self.root_key, blob, auth, handle)
Probe for an available PCR bank to accommodate devices that do not have a SHA-1 PCR bank or whose SHA-1 bank is deactivated. Use the bank that can be used in the TPM2 commands. Assert on the probing function to not return None. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> --- tools/testing/selftests/tpm2/tpm2_tests.py | 35 +++++++++++++++++----- 1 file changed, 27 insertions(+), 8 deletions(-)