Message ID | 20220429135108.2781579-9-schnelle@linux.ibm.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | None | expand |
Hello Niklas, On 29.04.22 15:50, Niklas Schnelle wrote: > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends > not being declared. We thus need to add this dependency and ifdef > sections of code using inb()/outb() as alternative access methods. > > Co-developed-by: Arnd Bergmann <arnd@kernel.org> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> [snip] > diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c > index 9c924a1440a9..2d2ae37153ba 100644 > --- a/drivers/char/tpm/tpm_infineon.c > +++ b/drivers/char/tpm/tpm_infineon.c > @@ -51,34 +51,40 @@ static struct tpm_inf_dev tpm_dev; > > static inline void tpm_data_out(unsigned char data, unsigned char offset) > { > +#ifdef CONFIG_HAS_IOPORT > if (tpm_dev.iotype == TPM_INF_IO_PORT) > outb(data, tpm_dev.data_regs + offset); > else > +#endif This looks ugly. Can't you declare inb/outb anyway and skip the definition, so you can use IS_ENABLED() here instead? You can mark the declarations with __compiletime_error("some message"), so if an IS_ENABLED() reference is not removed at compile time, you get some readable error message instead of a link error. Cheers, Ahmad > writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset); > } > > static inline unsigned char tpm_data_in(unsigned char offset) > { > +#ifdef CONFIG_HAS_IOPORT > if (tpm_dev.iotype == TPM_INF_IO_PORT) > return inb(tpm_dev.data_regs + offset); > - else > - return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset); > +#endif > + return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset); > } > > static inline void tpm_config_out(unsigned char data, unsigned char offset) > { > +#ifdef CONFIG_HAS_IOPORT > if (tpm_dev.iotype == TPM_INF_IO_PORT) > outb(data, tpm_dev.config_port + offset); > else > +#endif > writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset); > } > > static inline unsigned char tpm_config_in(unsigned char offset) > { > +#ifdef CONFIG_HAS_IOPORT > if (tpm_dev.iotype == TPM_INF_IO_PORT) > return inb(tpm_dev.config_port + offset); > - else > - return readb(tpm_dev.mem_base + tpm_dev.index_off + offset); > +#endif > + return readb(tpm_dev.mem_base + tpm_dev.index_off + offset); > } > > /* TPM header definitions */ > diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c > index dc56b976d816..1efb58dc1b41 100644 > --- a/drivers/char/tpm/tpm_tis_core.c > +++ b/drivers/char/tpm/tpm_tis_core.c > @@ -879,11 +879,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value) > clkrun_val &= ~LPC_CLKRUN_EN; > iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET); > > - /* > - * Write any random value on port 0x80 which is on LPC, to make > - * sure LPC clock is running before sending any TPM command. > - */ > - outb(0xCC, 0x80); > } else { > data->clkrun_enabled--; > if (data->clkrun_enabled) > @@ -894,13 +889,15 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value) > /* Enable LPC CLKRUN# */ > clkrun_val |= LPC_CLKRUN_EN; > iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET); > - > - /* > - * Write any random value on port 0x80 which is on LPC, to make > - * sure LPC clock is running before sending any TPM command. > - */ > - outb(0xCC, 0x80); > } > + > +#ifdef CONFIG_HAS_IOPORT > + /* > + * Write any random value on port 0x80 which is on LPC, to make > + * sure LPC clock is running before sending any TPM command. > + */ > + outb(0xCC, 0x80); > +#endif > } > > static const struct tpm_class_ops tpm_tis = {
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 55f48375e3fe..463b82935e78 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -33,6 +33,7 @@ config TTY_PRINTK_LEVEL config PRINTER tristate "Parallel printer support" depends on PARPORT + depends on HAS_IOPORT help If you intend to attach a printer to the parallel port of your Linux box (as opposed to using a serial printer; if the connector at the @@ -346,7 +347,7 @@ config NVRAM config DEVPORT bool "/dev/port character device" - depends on ISA || PCI + depends on HAS_IOPORT default y help Say Y here if you want to support the /dev/port device. The /dev/port diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile index 7ce790efad92..439bed4feb3a 100644 --- a/drivers/char/ipmi/Makefile +++ b/drivers/char/ipmi/Makefile @@ -5,13 +5,10 @@ ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o \ ipmi_si_hotmod.o ipmi_si_hardcode.o ipmi_si_platform.o \ - ipmi_si_port_io.o ipmi_si_mem_io.o -ifdef CONFIG_PCI -ipmi_si-y += ipmi_si_pci.o -endif -ifdef CONFIG_PARISC -ipmi_si-y += ipmi_si_parisc.o -endif + ipmi_si_mem_io.o +ipmi_si-$(CONFIG_HAS_IOPORT) += ipmi_si_port_io.o +ipmi_si-$(CONFIG_PCI) += ipmi_si_pci.o +ipmi_si-$(CONFIG_PARISC) += ipmi_si_parisc.o obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 64dedb3ef8ec..e8094b4007de 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1881,7 +1881,8 @@ int ipmi_si_add_smi(struct si_sm_io *io) } if (!io->io_setup) { - if (io->addr_space == IPMI_IO_ADDR_SPACE) { + if (IS_ENABLED(CONFIG_HAS_IOPORT) && + io->addr_space == IPMI_IO_ADDR_SPACE) { io->io_setup = ipmi_si_port_setup; } else if (io->addr_space == IPMI_MEM_ADDR_SPACE) { io->io_setup = ipmi_si_mem_setup; diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c index 74fa2055868b..b83d55685b22 100644 --- a/drivers/char/ipmi/ipmi_si_pci.c +++ b/drivers/char/ipmi/ipmi_si_pci.c @@ -97,6 +97,9 @@ static int ipmi_pci_probe(struct pci_dev *pdev, } if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return -ENXIO; + io.addr_space = IPMI_IO_ADDR_SPACE; io.io_setup = ipmi_si_port_setup; } else { diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 4a5516406c22..4bc52ed08015 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -137,6 +137,7 @@ config TCG_NSC config TCG_ATMEL tristate "Atmel TPM Interface" depends on PPC64 || HAS_IOPORT_MAP + depends on HAS_IOPORT help If you have a TPM security chip from Atmel say Yes and it will be accessible from within Linux. To compile this driver diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 9c924a1440a9..2d2ae37153ba 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -51,34 +51,40 @@ static struct tpm_inf_dev tpm_dev; static inline void tpm_data_out(unsigned char data, unsigned char offset) { +#ifdef CONFIG_HAS_IOPORT if (tpm_dev.iotype == TPM_INF_IO_PORT) outb(data, tpm_dev.data_regs + offset); else +#endif writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset); } static inline unsigned char tpm_data_in(unsigned char offset) { +#ifdef CONFIG_HAS_IOPORT if (tpm_dev.iotype == TPM_INF_IO_PORT) return inb(tpm_dev.data_regs + offset); - else - return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset); +#endif + return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset); } static inline void tpm_config_out(unsigned char data, unsigned char offset) { +#ifdef CONFIG_HAS_IOPORT if (tpm_dev.iotype == TPM_INF_IO_PORT) outb(data, tpm_dev.config_port + offset); else +#endif writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset); } static inline unsigned char tpm_config_in(unsigned char offset) { +#ifdef CONFIG_HAS_IOPORT if (tpm_dev.iotype == TPM_INF_IO_PORT) return inb(tpm_dev.config_port + offset); - else - return readb(tpm_dev.mem_base + tpm_dev.index_off + offset); +#endif + return readb(tpm_dev.mem_base + tpm_dev.index_off + offset); } /* TPM header definitions */ diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c index dc56b976d816..1efb58dc1b41 100644 --- a/drivers/char/tpm/tpm_tis_core.c +++ b/drivers/char/tpm/tpm_tis_core.c @@ -879,11 +879,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value) clkrun_val &= ~LPC_CLKRUN_EN; iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET); - /* - * Write any random value on port 0x80 which is on LPC, to make - * sure LPC clock is running before sending any TPM command. - */ - outb(0xCC, 0x80); } else { data->clkrun_enabled--; if (data->clkrun_enabled) @@ -894,13 +889,15 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value) /* Enable LPC CLKRUN# */ clkrun_val |= LPC_CLKRUN_EN; iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET); - - /* - * Write any random value on port 0x80 which is on LPC, to make - * sure LPC clock is running before sending any TPM command. - */ - outb(0xCC, 0x80); } + +#ifdef CONFIG_HAS_IOPORT + /* + * Write any random value on port 0x80 which is on LPC, to make + * sure LPC clock is running before sending any TPM command. + */ + outb(0xCC, 0x80); +#endif } static const struct tpm_class_ops tpm_tis = {
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add this dependency and ifdef sections of code using inb()/outb() as alternative access methods. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> --- drivers/char/Kconfig | 3 ++- drivers/char/ipmi/Makefile | 11 ++++------- drivers/char/ipmi/ipmi_si_intf.c | 3 ++- drivers/char/ipmi/ipmi_si_pci.c | 3 +++ drivers/char/tpm/Kconfig | 1 + drivers/char/tpm/tpm_infineon.c | 14 ++++++++++---- drivers/char/tpm/tpm_tis_core.c | 19 ++++++++----------- 7 files changed, 30 insertions(+), 24 deletions(-)