[v8,05/11] tpm, tpm_tis: Only handle supported interrupts

Commit Message

Lino Sanfilippo Oct. 17, 2022, 11:57 p.m. UTC

From: Lino Sanfilippo <[e-mail]>

According to the TPM Interface Specification (TIS) support for "stsValid"
and "commandReady" interrupts is only optional.
This has to be taken into account when handling the interrupts in functions
like wait_for_tpm_stat(). To determine the supported interrupts use the
capability query.

Also adjust wait_for_tpm_stat() to only wait for interrupt reported status
changes. After that process all the remaining status changes by polling
the status register.

Signed-off-by: Lino Sanfilippo <[e-mail]>
Tested-by: Michael Niewöhner <[e-mail]>
Reviewed-by: Jarkko Sakkinen <[e-mail]>
---
 drivers/char/tpm/tpm_tis_core.c | 120 +++++++++++++++++++-------------
 drivers/char/tpm/tpm_tis_core.h |   1 +
 2 files changed, 73 insertions(+), 48 deletions(-)

Patch

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 52205a1fee9e..d07debc3182c 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -53,41 +53,63 @@  static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
 	long rc;
 	u8 status;
 	bool canceled = false;
+	u8 sts_mask = 0;
+	int ret = 0;
 
 	/* check current status */
 	status = chip->ops->status(chip);
 	if ((status & mask) == mask)
 		return 0;
 
-	stop = jiffies + timeout;
+	/* check what status changes can be handled by irqs */
+	if (priv->int_mask & TPM_INTF_STS_VALID_INT)
+		sts_mask |= TPM_STS_VALID;
 
-	if (chip->flags & TPM_CHIP_FLAG_IRQ) {
+	if (priv->int_mask & TPM_INTF_DATA_AVAIL_INT)
+		sts_mask |= TPM_STS_DATA_AVAIL;
+
+	if (priv->int_mask & TPM_INTF_CMD_READY_INT)
+		sts_mask |= TPM_STS_COMMAND_READY;
+
+	sts_mask &= mask;
+
+	stop = jiffies + timeout;
+	/* process status changes with irq support */
+	if (sts_mask) {
+		ret = -ETIME;
 again:
 		timeout = stop - jiffies;
 		if ((long)timeout <= 0)
 			return -ETIME;
 		rc = wait_event_interruptible_timeout(*queue,
-			wait_for_tpm_stat_cond(chip, mask, check_cancel,
+			wait_for_tpm_stat_cond(chip, sts_mask, check_cancel,
 					       &canceled),
 			timeout);
 		if (rc > 0) {
 			if (canceled)
 				return -ECANCELED;
-			return 0;
+			ret = 0;
 		}
 		if (rc == -ERESTARTSYS && freezing(current)) {
 			clear_thread_flag(TIF_SIGPENDING);
 			goto again;
 		}
-	} else {
-		do {
-			usleep_range(priv->timeout_min,
-				     priv->timeout_max);
-			status = chip->ops->status(chip);
-			if ((status & mask) == mask)
-				return 0;
-		} while (time_before(jiffies, stop));
 	}
+
+	if (ret)
+		return ret;
+
+	mask &= ~sts_mask;
+	if (!mask) /* all done */
+		return 0;
+	/* process status changes without irq support */
+	do {
+		status = chip->ops->status(chip);
+		if ((status & mask) == mask)
+			return 0;
+		usleep_range(priv->timeout_min,
+			     priv->timeout_max);
+	} while (time_before(jiffies, stop));
 	return -ETIME;
 }
 
@@ -1021,8 +1043,40 @@  int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	if (rc < 0)
 		goto out_err;
 
-	intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
-		   TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
+	/* Figure out the capabilities */
+	rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
+	if (rc < 0)
+		goto out_err;
+
+	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
+		intfcaps);
+	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
+		dev_dbg(dev, "\tBurst Count Static\n");
+	if (intfcaps & TPM_INTF_CMD_READY_INT) {
+		intmask |= TPM_INTF_CMD_READY_INT;
+		dev_dbg(dev, "\tCommand Ready Int Support\n");
+	}
+	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
+		dev_dbg(dev, "\tInterrupt Edge Falling\n");
+	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
+		dev_dbg(dev, "\tInterrupt Edge Rising\n");
+	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
+		dev_dbg(dev, "\tInterrupt Level Low\n");
+	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
+		dev_dbg(dev, "\tInterrupt Level High\n");
+	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT) {
+		intmask |= TPM_INTF_LOCALITY_CHANGE_INT;
+		dev_dbg(dev, "\tLocality Change Int Support\n");
+	}
+	if (intfcaps & TPM_INTF_STS_VALID_INT) {
+		intmask |= TPM_INTF_STS_VALID_INT;
+		dev_dbg(dev, "\tSts Valid Int Support\n");
+	}
+	if (intfcaps & TPM_INTF_DATA_AVAIL_INT) {
+		intmask |= TPM_INTF_DATA_AVAIL_INT;
+		dev_dbg(dev, "\tData Avail Int Support\n");
+	}
+
 	intmask &= ~TPM_GLOBAL_INT_ENABLE;
 
 	rc = request_locality(chip, 0);
@@ -1056,32 +1110,6 @@  int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		goto out_err;
 	}
 
-	/* Figure out the capabilities */
-	rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
-	if (rc < 0)
-		goto out_err;
-
-	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
-		intfcaps);
-	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
-		dev_dbg(dev, "\tBurst Count Static\n");
-	if (intfcaps & TPM_INTF_CMD_READY_INT)
-		dev_dbg(dev, "\tCommand Ready Int Support\n");
-	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
-		dev_dbg(dev, "\tInterrupt Edge Falling\n");
-	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
-		dev_dbg(dev, "\tInterrupt Edge Rising\n");
-	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
-		dev_dbg(dev, "\tInterrupt Level Low\n");
-	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
-		dev_dbg(dev, "\tInterrupt Level High\n");
-	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
-		dev_dbg(dev, "\tLocality Change Int Support\n");
-	if (intfcaps & TPM_INTF_STS_VALID_INT)
-		dev_dbg(dev, "\tSts Valid Int Support\n");
-	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
-		dev_dbg(dev, "\tData Avail Int Support\n");
-
 	/* INTERRUPT Setup */
 	init_waitqueue_head(&priv->read_queue);
 	init_waitqueue_head(&priv->int_queue);
@@ -1112,7 +1140,9 @@  int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		else
 			tpm_tis_probe_irq(chip, intmask);
 
-		if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
+		if (chip->flags & TPM_CHIP_FLAG_IRQ) {
+			priv->int_mask = intmask;
+		} else {
 			dev_err(&chip->dev, FW_BUG
 					"TPM interrupt not working, polling instead\n");
 
@@ -1159,13 +1189,7 @@  static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
 	if (rc < 0)
 		goto out;
 
-	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
-	if (rc < 0)
-		goto out;
-
-	intmask |= TPM_INTF_CMD_READY_INT
-	    | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
-	    | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
+	intmask = priv->int_mask | TPM_GLOBAL_INT_ENABLE;
 
 	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
 
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 695a2516dce0..2deef11c88db 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -93,6 +93,7 @@  struct tpm_tis_data {
 	u16 manufacturer_id;
 	int locality;
 	int irq;
+	unsigned int int_mask;
 	unsigned long flags;
 	void __iomem *ilb_base_addr;
 	u16 clkrun_enabled;