[ima-evm-utils,v3,01/14] tests: Address issues raised by shellcheck SC2086 & enable shellcheck

Message ID	20231201133136.2124147-2-stefanb@linux.ibm.com (mailing list archive)
State	New, archived
Headers	show Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=ibm.com header.i=@ibm.com header.b="g3X/a0e6" From: Stefan Berger <stefanb@linux.ibm.com> To: linux-integrity@vger.kernel.org Cc: zohar@linux.ibm.com, Stefan Berger <stefanb@linux.ibm.com> Subject: [ima-evm-utils PATCH v3 01/14] tests: Address issues raised by shellcheck SC2086 & enable shellcheck Date: Fri, 1 Dec 2023 08:31:23 -0500 Message-ID: <20231201133136.2124147-2-stefanb@linux.ibm.com> In-Reply-To: <20231201133136.2124147-1-stefanb@linux.ibm.com> References: <20231201133136.2124147-1-stefanb@linux.ibm.com> Content-Transfer-Encoding: 8bit Precedence: bulk MIME-Version: 1.0
Series	Enable shellcheck and fix some issues \| expand [ima-evm-utils,v3,00/14] Enable shellcheck and fix some issues [ima-evm-utils,v3,01/14] tests: Address issues raised by shellcheck SC2086 & enable shellcheck [ima-evm-utils,v3,02/14] tests: Address issues raised by shellcheck SC2181 [ima-evm-utils,v3,03/14] tests: Address issues raised by shellcheck SC2046 [ima-evm-utils,v3,04/14] tests: Address issues raised by shellcheck SC2320 [ima-evm-utils,v3,05/14] tests: Address issues raised by shellcheck SC2317 [ima-evm-utils,v3,06/14] tests: Address issues raised by shellcheck SC2034 [ima-evm-utils,v3,07/14] tests: Address issues raised by shellcheck SC2164 [ima-evm-utils,v3,08/14] tests: Address issues raised by shellcheck SC2166 [ima-evm-utils,v3,09/14] tests: Address issues raised by shellcheck SC2294 [ima-evm-utils,v3,10/14] tests: Address issues raised by shellcheck SC2206 [ima-evm-utils,v3,11/14] tests: Address issues raised by shellcheck SC2196 [ima-evm-utils,v3,12/14] tests: Address issues raised by shellcheck SC2043 [ima-evm-utils,v3,13/14] tests: Address issues raised by shellcheck SC2295 [ima-evm-utils,v3,14/14] tests: Address issues raised by shellcheck SC2003

diff --git a/Makefile.am b/Makefile.am index 9ec5681..949c353 100644 --- a/Makefile.am +++ b/Makefile.am @@ -50,4 +50,7 @@ rmman: doc: evmctl.1.html rmman evmctl.1 endif -.PHONY: $(tarname) +shellcheck: + make -C tests shellcheck + +.PHONY: $(tarname) shellcheck diff --git a/tests/Makefile.am b/tests/Makefile.am index a28f671..6bf7eef 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -24,6 +24,15 @@ clean-local: -rm -f *.txt *.out *.sig *.sig2 distclean: distclean-keys -.PHONY: distclean-keys + +shellcheck: + shellcheck -i SC2086 \ + functions.sh gen-keys.sh install-fsverity.sh \ + install-mount-idmapped.sh install-openssl3.sh \ + install-swtpm.sh install-tss.sh softhsm_setup \ + $(check_SCRIPTS) + +.PHONY: distclean-keys shellcheck distclean-keys: ./gen-keys.sh clean + diff --git a/tests/boot_aggregate.test b/tests/boot_aggregate.test index b0b2db4..ccc45f9 100755 --- a/tests/boot_aggregate.test +++ b/tests/boot_aggregate.test @@ -129,7 +129,7 @@ check() { local options=$1 echo "INFO: Calculating the boot_aggregate (PCRs 0 - 9) for multiple banks" - bootaggr=$(evmctl ima_boot_aggregate ${options}) + bootaggr=$(evmctl ima_boot_aggregate "${options}") if [ $? -ne 0 ]; then echo "${CYAN}SKIP: evmctl ima_boot_aggregate: $bootaggr${NORM}" exit "$SKIP" @@ -197,4 +197,4 @@ if [ "$(id -u)" != 0 ] || [ ! -c "/dev/tpm0" ]; then fi fi -expect_pass check $BOOTAGGR_OPTIONS +expect_pass check "$BOOTAGGR_OPTIONS" diff --git a/tests/fsverity.test b/tests/fsverity.test index e1e0c8d..2b338ca 100755 --- a/tests/fsverity.test +++ b/tests/fsverity.test @@ -50,9 +50,9 @@ _require dd mkfs blkid e2fsck tune2fs evmctl setfattr trap '_report_exit_and_cleanup _cleanup_env cleanup' SIGINT SIGTERM EXIT cleanup() { - if [ -e $TST_MNT ]; then - if [ $LOOPBACK_MOUNTED -eq 1 ]; then - umount $TST_MNT + if [ -e "$TST_MNT" ]; then + if [ "$LOOPBACK_MOUNTED" -eq 1 ]; then + umount "$TST_MNT" fi if [ -f "$TST_IMG" ]; then rm "$TST_IMG" @@ -139,7 +139,7 @@ create_loopback_file() { fi echo "INFO: Building an $fs_type filesystem" - if ! mkfs -t "$fs_type" -q "${TST_IMG}" $options; then + if ! mkfs -t "$fs_type" -q "${TST_IMG}" ${options:+${options}}; then echo "${RED}FAILURE: Creating $fs_type filesystem${NORM}" exit "$FAIL" fi @@ -202,7 +202,7 @@ create_file() { local test=$1 local type=$2 - TST_FILE=$(mktemp -p $TST_MNT -t "${type}".XXXXXX) + TST_FILE=$(mktemp -p "$TST_MNT" -t "${type}".XXXXXX) [ "$VERBOSE" -ge 1 ] && echo "INFO: creating $TST_FILE" # heredoc to create a script @@ -251,13 +251,13 @@ measure-verity() { digest_filename=$("$FSVERITY" digest "$TST_FILE") [ "$VERBOSE" -ge 2 ] && echo "INFO: verity:$digest_filename" - grep "verity:$digest_filename" $IMA_MEASUREMENT_LIST &> /dev/null + grep "verity:$digest_filename" "$IMA_MEASUREMENT_LIST" &> /dev/null ret=$? # Not finding the "fsverity digest" result in the IMA measurement # list is expected for non fs-verity enabled files. The measurement # list will contain zeros for the file hash. - if [ $ret -eq 1 ]; then + if [ "$ret" -eq 1 ]; then error="$FAIL" if [ "$verity" = "enabled" ]; then echo "${RED}FAILURE: ${msg} ${NORM}" @@ -285,7 +285,7 @@ measure-ima() { create_file "$test" ima-hash "$TST_FILE" - hashalg=$(grep "${TST_FILE}" $IMA_MEASUREMENT_LIST | cut -d':' -f2) + hashalg=$(grep "${TST_FILE}" "$IMA_MEASUREMENT_LIST" | cut -d':' -f2) if [ -z "${hashalg}" ]; then echo "${CYAN}SKIP: Measurement record with algorithm not found${NORM}" return "$SKIP" @@ -301,7 +301,7 @@ measure-ima() { # Remove the extra space before the filename digest_filename=$(${digestsum} "$TST_FILE" | sed "s/\ \ /\ /") [ "$VERBOSE" -ge 2 ] && echo "$test: $digest_filename" - if grep "$digest_filename" $IMA_MEASUREMENT_LIST &> /dev/null; then + if grep "$digest_filename" "$IMA_MEASUREMENT_LIST" &> /dev/null; then echo "${GREEN}SUCCESS: Measuring $TST_FILE ${NORM}" else error="$FAIL" diff --git a/tests/functions.sh b/tests/functions.sh index 35e925c..2105f21 100755 --- a/tests/functions.sh +++ b/tests/functions.sh @@ -42,7 +42,7 @@ exit_early() { _require() { ret= for i; do - if ! type $i; then + if ! type "$i"; then echo "$i is required for test" ret=1 fi @@ -79,7 +79,7 @@ expect_pass() { fi if [ $TNESTED -gt 0 ]; then - echo $RED"expect_pass should not be run nested"$NORM + echo "${RED}expect_pass should not be run nested${NORM}" testsfail+=1 exit "$HARDFAIL" fi @@ -110,9 +110,9 @@ expect_pass_if() { ret=$? if [ $ret -ne 0 ] && [ $ret -ne 77 ] && [ -n "$PATCHES" ]; then - echo $YELLOW"Possibly missing patches:"$NORM + echo "${YELLOW}Possibly missing patches:${NORM}" for idx in $indexes; do - echo $YELLOW" - ${PATCHES[$((idx))]}"$NORM + echo "${YELLOW} - ${PATCHES[$((idx))]}${NORM}" done fi @@ -130,7 +130,7 @@ expect_fail() { fi if [ $TNESTED -gt 0 ]; then - echo $RED"expect_fail should not be run nested"$NORM + echo "${RED}expect_fail should not be run nested${NORM}" testsfail+=1 exit "$HARDFAIL" fi @@ -166,9 +166,9 @@ expect_fail_if() { ret=$? if { [ $ret -eq 0 ] || [ $ret -eq 99 ]; } && [ -n "$PATCHES" ]; then - echo $YELLOW"Possibly missing patches:"$NORM + echo "${YELLOW}Possibly missing patches:${NORM}" for idx in $indexes; do - echo $YELLOW" - ${PATCHES[$((idx))]}"$NORM + echo "${YELLOW} - ${PATCHES[$((idx))]}${NORM}" done fi @@ -177,12 +177,12 @@ expect_fail_if() { # return true if current test is positive _test_expected_to_pass() { - [ ! $TFAIL ] + [ ! "$TFAIL" ] } # return true if current test is negative _test_expected_to_fail() { - [ $TFAIL ] + [ "$TFAIL" ] } # Show blank line and color following text to red @@ -201,7 +201,7 @@ color_red() { } color_restore() { - [ $COLOR_RESTORE ] && echo "$NORM" + [ "$COLOR_RESTORE" ] && echo "$NORM" COLOR_RESTORE= } @@ -216,7 +216,7 @@ _evmctl_run() { # ADD_TEXT_FOR: append to text as 'for $ADD_TEXT_FOR' cmd="evmctl $V $EVMCTL_ENGINE $*" - echo $YELLOW$TMODE "$cmd"$NORM + echo "${YELLOW}$TMODE $cmd${NORM}" $cmd >"$out" 2>&1 ret=$? @@ -226,7 +226,7 @@ _evmctl_run() { echo "evmctl $op failed hard with ($ret) $text_for" sed 's/^/ /' "$out" color_restore - rm "$out" $ADD_DEL + rm "$out" "$ADD_DEL" ADD_DEL= ADD_TEXT_FOR= return "$HARDFAIL" @@ -238,7 +238,7 @@ _evmctl_run() { sed 's/^/ /' "$out" fi color_restore - rm "$out" $ADD_DEL + rm "$out" "$ADD_DEL" ADD_DEL= ADD_TEXT_FOR= return "$FAIL" @@ -371,7 +371,7 @@ _softhsm_setup() { msg=$(./softhsm_setup setup 2>&1) if [ $? -eq 0 ]; then echo "softhsm_setup setup succeeded: $msg" - PKCS11_KEYURI=$(echo $msg | sed -n 's|^keyuri: $.*$|\1|p') + PKCS11_KEYURI=$(echo "$msg" | sed -n 's|^keyuri: $.*$|\1|p') export EVMCTL_ENGINE="--engine pkcs11" export OPENSSL_ENGINE="-engine pkcs11" @@ -402,7 +402,7 @@ _run_env() { if [ "$TST_ENV" = "um" ]; then expect_pass "$1" rootfstype=hostfs rw init="$2" quiet mem=2048M "$3" else - echo $RED"Testing environment $TST_ENV not supported"$NORM + echo "${RED}Testing environment $TST_ENV not supported${NORM}" exit "$FAIL" fi } diff --git a/tests/gen-keys.sh b/tests/gen-keys.sh index 8905cdf..0b03ba4 100755 --- a/tests/gen-keys.sh +++ b/tests/gen-keys.sh @@ -71,9 +71,9 @@ for m in 1024 1024_skid 2048; do ext= fi if [ ! -e test-rsa$m.key ]; then - log openssl req -verbose -new -nodes -utf8 -sha256 -days 10000 -batch -x509 $ext \ + log openssl req -verbose -new -nodes -utf8 -sha256 -days 10000 -batch -x509 "$ext" \ -config test-ca.conf \ - -newkey rsa:$bits \ + -newkey "rsa:$bits" \ -out test-rsa$m.cer -outform DER \ -keyout test-rsa$m.key # for v1 signatures diff --git a/tests/install-openssl3.sh b/tests/install-openssl3.sh index 911c32b..6658c23 100755 --- a/tests/install-openssl3.sh +++ b/tests/install-openssl3.sh @@ -9,16 +9,16 @@ fi version=${COMPILE_SSL} -wget --no-check-certificate https://github.com/openssl/openssl/archive/refs/tags/${version}.tar.gz -tar --no-same-owner -xzf ${version}.tar.gz -cd openssl-${version} +wget --no-check-certificate "https://github.com/openssl/openssl/archive/refs/tags/${version}.tar.gz" +tar --no-same-owner -xzf "${version}.tar.gz" +cd "openssl-${version}" if [ "$VARIANT" = "i386" ]; then echo "32-bit compilation" FLAGS="-m32 linux-generic32" fi -./Configure $FLAGS no-engine no-dynamic-engine --prefix=/opt/openssl3 --openssldir=/opt/openssl3 +./Configure ${FLAGS:+${FLAGS}} no-engine no-dynamic-engine --prefix=/opt/openssl3 --openssldir=/opt/openssl3 # Uncomment for debugging # perl configdata.pm --dump | grep engine make -j$(nproc) @@ -26,5 +26,5 @@ make -j$(nproc) sudo make install_sw cd .. -rm -rf ${version}.tar.gz -rm -rf openssl-${version} +rm -rf "${version}.tar.gz" +rm -rf "openssl-${version}" diff --git a/tests/sign_verify.test b/tests/sign_verify.test index 2bc365a..5cc0393 100755 --- a/tests/sign_verify.test +++ b/tests/sign_verify.test @@ -141,7 +141,7 @@ check_sign() { local FILE=${FILE:-$ALG.txt} # Normalize key filename if it's not a pkcs11 URI - if [ ${KEY:0:7} != pkcs11: ]; then + if [ "${KEY:0:7}" != pkcs11: ]; then key=${KEY%.*}.key key=test-${key#test-} else @@ -152,8 +152,8 @@ check_sign() { # leave only good files for verify tests. _test_expected_to_fail && FILE+='~' - rm -f $FILE - if ! touch $FILE; then + rm -f "$FILE" + if ! touch "$FILE"; then color_red echo "Can't create test file: $FILE" color_restore @@ -372,7 +372,7 @@ try_different_sigs() { ## Test v1 signatures # Signature v1 only supports sha1 and sha256 so any other should fail -if [ $SIGV1 -eq 0 ]; then +if [ "$SIGV1" -eq 0 ]; then __skip() { echo "IMA signature v1 tests are skipped: not supported"; return $SKIP; } expect_pass __skip else @@ -440,8 +440,8 @@ expect_fail \ # Test signing with key described by pkcs11 URI _softhsm_setup "${WORKDIR}" if [ -n "${PKCS11_KEYURI}" ]; then - expect_pass check_sign FILE=pkcs11test TYPE=ima KEY=${PKCS11_KEYURI} ALG=sha256 PREFIX=0x030204aabbccdd0100 OPTS=--keyid=aabbccdd - expect_pass check_sign FILE=pkcs11test TYPE=ima KEY=${PKCS11_KEYURI} ALG=sha1 PREFIX=0x030202aabbccdd0100 OPTS=--keyid=aabbccdd + expect_pass check_sign FILE=pkcs11test TYPE=ima KEY="${PKCS11_KEYURI}" ALG=sha256 PREFIX=0x030204aabbccdd0100 OPTS=--keyid=aabbccdd + expect_pass check_sign FILE=pkcs11test TYPE=ima KEY="${PKCS11_KEYURI}" ALG=sha1 PREFIX=0x030202aabbccdd0100 OPTS=--keyid=aabbccdd else # to have a constant number of tests, skip these two tests __skip() { echo "pkcs11 test is skipped: could not setup softhsm"; return $SKIP; } diff --git a/tests/softhsm_setup b/tests/softhsm_setup index 35b1754..10e4013 100755 --- a/tests/softhsm_setup +++ b/tests/softhsm_setup @@ -15,7 +15,7 @@ fi MAJOR=$(softhsm2-util -v | cut -d '.' -f1) MINOR=$(softhsm2-util -v | cut -d '.' -f2) -if [ ${MAJOR} -lt 2 ] || [ ${MAJOR} -eq 2 -a ${MINOR} -lt 2 ]; then +if [ "${MAJOR}" -lt 2 ] || [ "${MAJOR}" -eq 2 -a "${MINOR}" -lt 2 ]; then echo "Need softhsm v2.2.0 or later" exit 77 fi @@ -91,21 +91,21 @@ setup_softhsm() { grep -E "\.so$")" fi sudo mkdir -p /etc/gnutls &>/dev/null - sudo bash -c "echo "load=${SONAME}" > /etc/gnutls/pkcs11.conf" + sudo bash -c "echo 'load=${SONAME}' > /etc/gnutls/pkcs11.conf" ;; esac - if ! [ -d $configdir ]; then - mkdir -p $configdir + if ! [ -d "$configdir" ]; then + mkdir -p "$configdir" fi - mkdir -p ${tokendir} + mkdir -p "${tokendir}" - if [ -f $configfile ]; then + if [ -f "$configfile" ]; then mv "$configfile" "$bakconfigfile" fi - if ! [ -f $configfile ]; then - cat <<_EOF_ > $configfile + if ! [ -f "$configfile" ]; then + cat <<_EOF_ > "$configfile" directories.tokendir = ${tokendir} objectstore.backend = file log.level = DEBUG @@ -122,8 +122,8 @@ _EOF_ if [ -z "$tokenuri" ]; then msg=$(softhsm2-util \ - --init-token --pin ${PIN} --so-pin ${SO_PIN} \ - --free --label ${NAME} 2>&1) + --init-token --pin "${PIN}" --so-pin "${SO_PIN}" \ + --free --label "${NAME}" 2>&1) if [ $? -ne 0 ]; then echo "Could not initialize token" echo "$msg" @@ -172,7 +172,7 @@ _EOF_ fi fi - getkeyuri_softhsm $slot + getkeyuri_softhsm "$slot" rc=$? if [ $rc -ne 0 ]; then teardown_softhsm @@ -196,7 +196,7 @@ _getkeyuri_softhsm() { echo "$msg" return 6 fi - msg=$(p11tool --list-all ${tokenuri} 2>&1) + msg=$(p11tool --list-all "${tokenuri}" 2>&1) if [ $? -ne 0 ]; then echo "Could not list object under token $tokenuri" echo "$msg" @@ -260,7 +260,7 @@ main() { local ret if [ $# -lt 1 ]; then - usage $0 + usage "$0" echo -e "Missing command.\n\n" return 1 fi @@ -283,7 +283,7 @@ main() { ;; *) echo -e "Unsupported command: $1\n\n" - usage $0 + usage "$0" ret=1 esac return $ret

[ima-evm-utils,v3,01/14] tests: Address issues raised by shellcheck SC2086 & enable shellcheck

Commit Message

Patch