| Message ID | 20240214153827.1087657-9-tusharsu@linux.microsoft.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ima: kexec: measure events between kexec load and execute | expand |
On 2/14/24 10:38, Tushar Sugandhi wrote: > The amount of memory allocated at kexec load, even with the extra memory > allocated, might not be large enough for the entire measurement list. The > indeterminate interval between kexec 'load' and 'execute' could exacerbate > this problem. > > Define two new IMA events, 'kexec_load' and 'kexec_execute', to be > measured as critical data at kexec 'load' and 'execute' respectively. > Report the allocated kexec segment size, IMA binary log size and the > runtime measurements count as part of those events. > > These events, and the values reported through them, serve as markers in > the IMA log to verify the IMA events are captured during kexec soft > reboot. The presence of a 'kexec_load' event in between the last two > 'boot_aggregate' events in the IMA log implies this is a kexec soft > reboot, and not a cold-boot. And the absence of 'kexec_execute' event > after kexec soft reboot implies missing events in that window which > results in inconsistency with TPM PCR quotes, necessitating a cold boot > for a successful remote attestation. > > Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> > --- > security/integrity/ima/ima_kexec.c | 34 +++++++++++++++++++++++++++++- > 1 file changed, 33 insertions(+), 1 deletion(-) > > diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c > index 50903d4ce880..31495a043959 100644 > --- a/security/integrity/ima/ima_kexec.c > +++ b/security/integrity/ima/ima_kexec.c > @@ -17,6 +17,8 @@ > #include "ima.h" > > #ifdef CONFIG_IMA_KEXEC > +#define IMA_KEXEC_EVENT_LEN 256 > + > static struct seq_file ima_kexec_file; > static void *ima_kexec_buffer; > static size_t kexec_segment_size; > @@ -38,6 +40,10 @@ static void ima_free_kexec_file_buf(struct seq_file *sf) > > static int ima_alloc_kexec_file_buf(size_t segment_size) > { > + char ima_kexec_event[IMA_KEXEC_EVENT_LEN]; > + size_t buf_size; > + long len; > + > /* > * kexec 'load' may be called multiple times. > * Free and realloc the buffer only if the segment_size is > @@ -47,7 +53,7 @@ static int ima_alloc_kexec_file_buf(size_t segment_size) > ima_kexec_file.size == segment_size && > ima_kexec_file.read_pos == 0 && > ima_kexec_file.count == sizeof(struct ima_kexec_hdr)) > - return 0; > + goto out; > > ima_free_kexec_file_buf(&ima_kexec_file); > > @@ -60,6 +66,18 @@ static int ima_alloc_kexec_file_buf(size_t segment_size) > ima_kexec_file.read_pos = 0; > ima_kexec_file.count = sizeof(struct ima_kexec_hdr); /* reserved space */ > > +out: > + buf_size = ima_get_binary_runtime_size(); > + len = atomic_long_read(&ima_htable.len); > + > + scnprintf(ima_kexec_event, IMA_KEXEC_EVENT_LEN, > + "kexec_segment_size=%lu;ima_binary_runtime_size=%lu;" > + "ima_runtime_measurements_count=%ld;", > + segment_size, buf_size, len); > + > + ima_measure_critical_data("ima_kexec", "kexec_load", ima_kexec_event, > + strlen(ima_kexec_event), false, NULL, 0); > + > return 0; > } > > @@ -186,10 +204,12 @@ void ima_add_kexec_buffer(struct kimage *image) > static int ima_update_kexec_buffer(struct notifier_block *self, > unsigned long action, void *data) > { > + char ima_kexec_event[IMA_KEXEC_EVENT_LEN]; > void *buf = NULL; > size_t buf_size; > int ret = NOTIFY_OK; > bool resume = false; > + long len; > > if (!kexec_in_progress) { > pr_info("%s: No kexec in progress.\n", __func__); > @@ -201,6 +221,18 @@ static int ima_update_kexec_buffer(struct notifier_block *self, > return ret; > } > > + buf_size = ima_get_binary_runtime_size(); > + len = atomic_long_read(&ima_htable.len); > + > + scnprintf(ima_kexec_event, IMA_KEXEC_EVENT_LEN, > + "kexec_segment_size=%lu;ima_binary_runtime_size=%lu;" > + "ima_runtime_measurements_count=%ld;", > + kexec_segment_size, buf_size, len); > + > + ima_measure_critical_data("ima_kexec", "kexec_execute", > + ima_kexec_event, strlen(ima_kexec_event), > + false, NULL, 0); > + > ima_measurements_suspend(); > > ret = ima_dump_measurement_list(&buf_size, &buf, It's twice the same code almost in the same file. You could move it into a function.
On 2/14/24 10:38, Tushar Sugandhi wrote: > The amount of memory allocated at kexec load, even with the extra memory > allocated, might not be large enough for the entire measurement list. The > indeterminate interval between kexec 'load' and 'execute' could exacerbate > this problem. > > Define two new IMA events, 'kexec_load' and 'kexec_execute', to be > measured as critical data at kexec 'load' and 'execute' respectively. > Report the allocated kexec segment size, IMA binary log size and the > runtime measurements count as part of those events. > > These events, and the values reported through them, serve as markers in > the IMA log to verify the IMA events are captured during kexec soft > reboot. The presence of a 'kexec_load' event in between the last two > 'boot_aggregate' events in the IMA log implies this is a kexec soft > reboot, and not a cold-boot. And the absence of 'kexec_execute' event > after kexec soft reboot implies missing events in that window which > results in inconsistency with TPM PCR quotes, necessitating a cold boot > for a successful remote attestation. > > Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> I successfully tested this series on ppc64. I will give you a Tested-by tag in the next round. Stefan
On 2/14/24 13:00, Stefan Berger wrote: > > > On 2/14/24 10:38, Tushar Sugandhi wrote: >> The amount of memory allocated at kexec load, even with the extra memory >> allocated, might not be large enough for the entire measurement list. >> The >> indeterminate interval between kexec 'load' and 'execute' could >> exacerbate >> this problem. >> >> Define two new IMA events, 'kexec_load' and 'kexec_execute', to be >> measured as critical data at kexec 'load' and 'execute' respectively. >> Report the allocated kexec segment size, IMA binary log size and the >> runtime measurements count as part of those events. >> >> These events, and the values reported through them, serve as markers in >> the IMA log to verify the IMA events are captured during kexec soft >> reboot. The presence of a 'kexec_load' event in between the last two >> 'boot_aggregate' events in the IMA log implies this is a kexec soft >> reboot, and not a cold-boot. And the absence of 'kexec_execute' event >> after kexec soft reboot implies missing events in that window which >> results in inconsistency with TPM PCR quotes, necessitating a cold boot >> for a successful remote attestation. >> >> Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> >> --- >> security/integrity/ima/ima_kexec.c | 34 +++++++++++++++++++++++++++++- >> 1 file changed, 33 insertions(+), 1 deletion(-) >> >> diff --git a/security/integrity/ima/ima_kexec.c >> b/security/integrity/ima/ima_kexec.c >> index 50903d4ce880..31495a043959 100644 >> --- a/security/integrity/ima/ima_kexec.c >> +++ b/security/integrity/ima/ima_kexec.c >> @@ -17,6 +17,8 @@ >> #include "ima.h" >> #ifdef CONFIG_IMA_KEXEC >> +#define IMA_KEXEC_EVENT_LEN 256 >> + >> static struct seq_file ima_kexec_file; >> static void *ima_kexec_buffer; >> static size_t kexec_segment_size; >> @@ -38,6 +40,10 @@ static void ima_free_kexec_file_buf(struct seq_file >> *sf) >> static int ima_alloc_kexec_file_buf(size_t segment_size) >> { >> + char ima_kexec_event[IMA_KEXEC_EVENT_LEN]; >> + size_t buf_size; >> + long len; >> + >> /* >> * kexec 'load' may be called multiple times. >> * Free and realloc the buffer only if the segment_size is >> @@ -47,7 +53,7 @@ static int ima_alloc_kexec_file_buf(size_t >> segment_size) >> ima_kexec_file.size == segment_size && >> ima_kexec_file.read_pos == 0 && >> ima_kexec_file.count == sizeof(struct ima_kexec_hdr)) >> - return 0; >> + goto out; >> ima_free_kexec_file_buf(&ima_kexec_file); >> @@ -60,6 +66,18 @@ static int ima_alloc_kexec_file_buf(size_t >> segment_size) >> ima_kexec_file.read_pos = 0; >> ima_kexec_file.count = sizeof(struct ima_kexec_hdr); /* >> reserved space */ >> +out: >> + buf_size = ima_get_binary_runtime_size(); >> + len = atomic_long_read(&ima_htable.len); >> + >> + scnprintf(ima_kexec_event, IMA_KEXEC_EVENT_LEN, >> + "kexec_segment_size=%lu;ima_binary_runtime_size=%lu;" >> + "ima_runtime_measurements_count=%ld;", >> + segment_size, buf_size, len); >> + >> + ima_measure_critical_data("ima_kexec", "kexec_load", >> ima_kexec_event, >> + strlen(ima_kexec_event), false, NULL, 0); >> + >> return 0; >> } >> @@ -186,10 +204,12 @@ void ima_add_kexec_buffer(struct kimage *image) >> static int ima_update_kexec_buffer(struct notifier_block *self, >> unsigned long action, void *data) >> { >> + char ima_kexec_event[IMA_KEXEC_EVENT_LEN]; >> void *buf = NULL; >> size_t buf_size; >> int ret = NOTIFY_OK; >> bool resume = false; >> + long len; >> if (!kexec_in_progress) { >> pr_info("%s: No kexec in progress.\n", __func__); >> @@ -201,6 +221,18 @@ static int ima_update_kexec_buffer(struct >> notifier_block *self, >> return ret; >> } >> + buf_size = ima_get_binary_runtime_size(); >> + len = atomic_long_read(&ima_htable.len); >> + >> + scnprintf(ima_kexec_event, IMA_KEXEC_EVENT_LEN, >> + "kexec_segment_size=%lu;ima_binary_runtime_size=%lu;" >> + "ima_runtime_measurements_count=%ld;", >> + kexec_segment_size, buf_size, len); >> + >> + ima_measure_critical_data("ima_kexec", "kexec_execute", >> + ima_kexec_event, strlen(ima_kexec_event), >> + false, NULL, 0); >> + >> ima_measurements_suspend(); >> ret = ima_dump_measurement_list(&buf_size, &buf, > > It's twice the same code almost in the same file. You could move it into > a function. Fair enough. Will do. ~Tushar
On 2/14/24 13:03, Stefan Berger wrote: > > > On 2/14/24 10:38, Tushar Sugandhi wrote: >> The amount of memory allocated at kexec load, even with the extra memory >> allocated, might not be large enough for the entire measurement list. >> The >> indeterminate interval between kexec 'load' and 'execute' could >> exacerbate >> this problem. >> >> Define two new IMA events, 'kexec_load' and 'kexec_execute', to be >> measured as critical data at kexec 'load' and 'execute' respectively. >> Report the allocated kexec segment size, IMA binary log size and the >> runtime measurements count as part of those events. >> >> These events, and the values reported through them, serve as markers in >> the IMA log to verify the IMA events are captured during kexec soft >> reboot. The presence of a 'kexec_load' event in between the last two >> 'boot_aggregate' events in the IMA log implies this is a kexec soft >> reboot, and not a cold-boot. And the absence of 'kexec_execute' event >> after kexec soft reboot implies missing events in that window which >> results in inconsistency with TPM PCR quotes, necessitating a cold boot >> for a successful remote attestation. >> >> Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> > > I successfully tested this series on ppc64. I will give you a Tested-by > tag in the next round. > > Stefan Awesome! Appreciate it. ~Tushar
diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c index 50903d4ce880..31495a043959 100644 --- a/security/integrity/ima/ima_kexec.c +++ b/security/integrity/ima/ima_kexec.c @@ -17,6 +17,8 @@ #include "ima.h" #ifdef CONFIG_IMA_KEXEC +#define IMA_KEXEC_EVENT_LEN 256 + static struct seq_file ima_kexec_file; static void *ima_kexec_buffer; static size_t kexec_segment_size; @@ -38,6 +40,10 @@ static void ima_free_kexec_file_buf(struct seq_file *sf) static int ima_alloc_kexec_file_buf(size_t segment_size) { + char ima_kexec_event[IMA_KEXEC_EVENT_LEN]; + size_t buf_size; + long len; + /* * kexec 'load' may be called multiple times. * Free and realloc the buffer only if the segment_size is @@ -47,7 +53,7 @@ static int ima_alloc_kexec_file_buf(size_t segment_size) ima_kexec_file.size == segment_size && ima_kexec_file.read_pos == 0 && ima_kexec_file.count == sizeof(struct ima_kexec_hdr)) - return 0; + goto out; ima_free_kexec_file_buf(&ima_kexec_file); @@ -60,6 +66,18 @@ static int ima_alloc_kexec_file_buf(size_t segment_size) ima_kexec_file.read_pos = 0; ima_kexec_file.count = sizeof(struct ima_kexec_hdr); /* reserved space */ +out: + buf_size = ima_get_binary_runtime_size(); + len = atomic_long_read(&ima_htable.len); + + scnprintf(ima_kexec_event, IMA_KEXEC_EVENT_LEN, + "kexec_segment_size=%lu;ima_binary_runtime_size=%lu;" + "ima_runtime_measurements_count=%ld;", + segment_size, buf_size, len); + + ima_measure_critical_data("ima_kexec", "kexec_load", ima_kexec_event, + strlen(ima_kexec_event), false, NULL, 0); + return 0; } @@ -186,10 +204,12 @@ void ima_add_kexec_buffer(struct kimage *image) static int ima_update_kexec_buffer(struct notifier_block *self, unsigned long action, void *data) { + char ima_kexec_event[IMA_KEXEC_EVENT_LEN]; void *buf = NULL; size_t buf_size; int ret = NOTIFY_OK; bool resume = false; + long len; if (!kexec_in_progress) { pr_info("%s: No kexec in progress.\n", __func__); @@ -201,6 +221,18 @@ static int ima_update_kexec_buffer(struct notifier_block *self, return ret; } + buf_size = ima_get_binary_runtime_size(); + len = atomic_long_read(&ima_htable.len); + + scnprintf(ima_kexec_event, IMA_KEXEC_EVENT_LEN, + "kexec_segment_size=%lu;ima_binary_runtime_size=%lu;" + "ima_runtime_measurements_count=%ld;", + kexec_segment_size, buf_size, len); + + ima_measure_critical_data("ima_kexec", "kexec_execute", + ima_kexec_event, strlen(ima_kexec_event), + false, NULL, 0); + ima_measurements_suspend(); ret = ima_dump_measurement_list(&buf_size, &buf,
The amount of memory allocated at kexec load, even with the extra memory allocated, might not be large enough for the entire measurement list. The indeterminate interval between kexec 'load' and 'execute' could exacerbate this problem. Define two new IMA events, 'kexec_load' and 'kexec_execute', to be measured as critical data at kexec 'load' and 'execute' respectively. Report the allocated kexec segment size, IMA binary log size and the runtime measurements count as part of those events. These events, and the values reported through them, serve as markers in the IMA log to verify the IMA events are captured during kexec soft reboot. The presence of a 'kexec_load' event in between the last two 'boot_aggregate' events in the IMA log implies this is a kexec soft reboot, and not a cold-boot. And the absence of 'kexec_execute' event after kexec soft reboot implies missing events in that window which results in inconsistency with TPM PCR quotes, necessitating a cold boot for a successful remote attestation. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> --- security/integrity/ima/ima_kexec.c | 34 +++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-)