@@ -68,7 +68,6 @@ autoconf.h*
bbootsect
bin2c
binkernel.spec
-binoffset
bootsect
bounds.h
bsetup
@@ -6,5 +6,4 @@ kallsyms
pnmtologo
bin2c
unifdef
-binoffset
ihex2fw
deleted file mode 100644
@@ -1,163 +0,0 @@
-/***************************************************************************
- * binoffset.c
- * (C) 2002 Randy Dunlap <rdunlap@xenotime.net>
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# binoffset.c:
-# - searches a (binary) file for a specified (binary) pattern
-# - returns the offset of the located pattern or ~0 if not found
-# - exits with exit status 0 normally or non-0 if pattern is not found
-# or any other error occurs.
-
-****************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mman.h>
-
-#define VERSION "0.1"
-#define BUF_SIZE (16 * 1024)
-#define PAT_SIZE 100
-
-char *progname;
-char *inputname;
-int inputfd;
-unsigned int bix; /* buf index */
-unsigned char patterns [PAT_SIZE] = {0}; /* byte-sized pattern array */
-int pat_len; /* actual number of pattern bytes */
-unsigned char *madr; /* mmap address */
-size_t filesize;
-int num_matches = 0;
-off_t firstloc = 0;
-
-void usage (void)
-{
- fprintf (stderr, "%s ver. %s\n", progname, VERSION);
- fprintf (stderr, "usage: %s filename pattern_bytes\n",
- progname);
- fprintf (stderr, " [prints location of pattern_bytes in file]\n");
- exit (1);
-}
-
-void get_pattern (int pat_count, char *pats [])
-{
- int ix, err, tmp;
-
-#ifdef DEBUG
- fprintf (stderr,"get_pattern: count = %d\n", pat_count);
- for (ix = 0; ix < pat_count; ix++)
- fprintf (stderr, " pat # %d: [%s]\n", ix, pats[ix]);
-#endif
-
- for (ix = 0; ix < pat_count; ix++) {
- tmp = 0;
- err = sscanf (pats[ix], "%5i", &tmp);
- if (err != 1 || tmp > 0xff) {
- fprintf (stderr, "pattern or value error in pattern # %d [%s]\n",
- ix, pats[ix]);
- usage ();
- }
- patterns [ix] = tmp;
- }
- pat_len = pat_count;
-}
-
-void search_pattern (void)
-{
- for (bix = 0; bix < filesize; bix++) {
- if (madr[bix] == patterns[0]) {
- if (memcmp (&madr[bix], patterns, pat_len) == 0) {
- if (num_matches == 0)
- firstloc = bix;
- num_matches++;
- }
- }
- }
-}
-
-#ifdef NOTDEF
-size_t get_filesize (int fd)
-{
- off_t end_off = lseek (fd, 0, SEEK_END);
- lseek (fd, 0, SEEK_SET);
- return (size_t) end_off;
-}
-#endif
-
-size_t get_filesize (int fd)
-{
- int err;
- struct stat stat;
-
- err = fstat (fd, &stat);
- fprintf (stderr, "filesize: %ld\n", err < 0 ? (long)err : stat.st_size);
- if (err < 0)
- return err;
- return (size_t) stat.st_size;
-}
-
-int main (int argc, char *argv [])
-{
- progname = argv[0];
-
- if (argc < 3)
- usage ();
-
- get_pattern (argc - 2, argv + 2);
-
- inputname = argv[1];
-
- inputfd = open (inputname, O_RDONLY);
- if (inputfd == -1) {
- fprintf (stderr, "%s: cannot open '%s'\n",
- progname, inputname);
- exit (3);
- }
-
- filesize = get_filesize (inputfd);
-
- madr = mmap (0, filesize, PROT_READ, MAP_PRIVATE, inputfd, 0);
- if (madr == MAP_FAILED) {
- fprintf (stderr, "mmap error = %d\n", errno);
- close (inputfd);
- exit (4);
- }
-
- search_pattern ();
-
- if (munmap (madr, filesize))
- fprintf (stderr, "munmap error = %d\n", errno);
-
- if (close (inputfd))
- fprintf (stderr, "%s: error %d closing '%s'\n",
- progname, errno, inputname);
-
- fprintf (stderr, "number of pattern matches = %d\n", num_matches);
- if (num_matches == 0)
- firstloc = ~0;
- printf ("%ld\n", firstloc);
- fprintf (stderr, "%ld\n", firstloc);
-
- exit (num_matches ? 0 : 2);
-}
-
-/* end binoffset.c */
@@ -1,92 +1,53 @@
#!/bin/sh
-# extracts .config info from a [b]zImage file
-# uses: binoffset (new), dd, zcat, strings, grep
-# $arg1 is [b]zImage filename
-
-binoffset="./scripts/binoffset"
-test -e $binoffset || cc -o $binoffset ./scripts/binoffset.c || exit 1
-
-IKCFG_ST="0x49 0x4b 0x43 0x46 0x47 0x5f 0x53 0x54"
-IKCFG_ED="0x49 0x4b 0x43 0x46 0x47 0x5f 0x45 0x44"
-dump_config() {
- file="$1"
-
- start=`$binoffset $file $IKCFG_ST 2>/dev/null`
- [ "$?" != "0" ] && start="-1"
- if [ "$start" -eq "-1" ]; then
- return
- fi
- end=`$binoffset $file $IKCFG_ED 2>/dev/null`
- [ "$?" != "0" ] && end="-1"
- if [ "$end" -eq "-1" ]; then
- return
- fi
-
- start=`expr $start + 8`
- size=`expr $end - $start`
-
- dd if="$file" ibs=1 skip="$start" count="$size" 2>/dev/null | zcat
-
- clean_up
- exit 0
-}
-
-
-usage()
-{
- echo " usage: extract-ikconfig [b]zImage_filename"
-}
-
-clean_up()
+# ----------------------------------------------------------------------
+# extract-ikconfig - Extract the .config file from a kernel image
+#
+# This will only work when the kernel was compiled with CONFIG_IKCONFIG.
+#
+# The obscure use of the "tr" filter is to work around older versions of
+# "grep" that report the byte offset of the line instead of the pattern.
+#
+# (c) 2009, Dick Streefland <dick@streefland.net>
+# Licensed under the terms of the GNU General Public License.
+# ----------------------------------------------------------------------
+
+gz1='\037\213\010'
+gz2='01'
+cf1='IKCFG_ST\037\213\010'
+cf2='0123456789'
+
+dump_config()
{
- if [ "$TMPFILE" != "" ]; then
- rm -f $TMPFILE
+ if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"`
+ then
+ pos=${pos%%:*}
+ tail -c+$(($pos+8)) "$1" | zcat -q
+ exit 0
fi
}
-if [ $# -lt 1 ]
+# Check invocation:
+me=${0##*/}
+img=$1
+if [ $# -ne 1 -o ! -s "$img" ]
then
- usage
- exit 1
+ echo "Usage: $me <kernel-image>" >&2
+ exit 2
fi
-TMPFILE=`mktemp -t ikconfig-XXXXXX` || exit 1
-image="$1"
-
-# vmlinux: Attempt to dump the configuration from the file directly
-dump_config "$image"
-
-GZHDR1="0x1f 0x8b 0x08 0x00"
-GZHDR2="0x1f 0x8b 0x08 0x08"
-
-ELFHDR="0x7f 0x45 0x4c 0x46"
-
-# vmlinux.gz: Check for a compressed images
-off=`$binoffset "$image" $GZHDR1 2>/dev/null`
-[ "$?" != "0" ] && off="-1"
-if [ "$off" -eq "-1" ]; then
- off=`$binoffset "$image" $GZHDR2 2>/dev/null`
- [ "$?" != "0" ] && off="-1"
-fi
-if [ "$off" -eq "0" ]; then
- zcat <"$image" >"$TMPFILE"
- dump_config "$TMPFILE"
-elif [ "$off" -ne "-1" ]; then
- (dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \
- zcat >"$TMPFILE"
- dump_config "$TMPFILE"
-
-# check if this is simply an ELF file
-else
- off=`$binoffset "$image" $ELFHDR 2>/dev/null`
- [ "$?" != "0" ] && off="-1"
- if [ "$off" -eq "0" ]; then
- dump_config "$image"
- fi
-fi
-
-echo "ERROR: Unable to extract kernel configuration information."
-echo " This kernel image may not have the config info."
-
-clean_up
+# Initial attempt for uncompressed images or objects:
+dump_config "$img"
+
+# That didn't work, so decompress and try again:
+tmp=/tmp/ikconfig$$
+trap "rm -f $tmp" 0
+for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"`
+do
+ pos=${pos%%:*}
+ tail -c+$pos "$img" | zcat 2> /dev/null > $tmp
+ dump_config $tmp
+done
+
+# Bail out:
+echo "$me: Cannot find kernel config." >&2
exit 1