| Message ID | 20200603092049.2036551-1-efremov@linux.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC,v4] kbuild: add variables for compression tools | expand |
On Wed, Jun 3, 2020 at 6:19 PM Denis Efremov <efremov@linux.com> wrote: > > Allow user to use alternative implementations of compression tools, > such as pigz, pbzip2, pxz. For example, multi-threaded tools to > speed up the build: > $ make GZIP=pigz BZIP2=pbzip2 > > Variables _GZIP, _BZIP2, _LZOP are used internally because original env > vars are reserved by the tools. The use of GZIP in gzip tool is obsolete > since 2015. However, alternative implementations (e.g., pigz) still rely > on it. BZIP2, BZIP, LZOP vars are not obsolescent. > > The credit goes to @grsecurity. > > As a sidenote, for multi-threaded lzma, xz compression one can use: > $ export XZ_OPT="--threads=0" > > Signed-off-by: Denis Efremov <efremov@linux.com> > --- Applied to linux-kbuild. Thanks. > Changes in v2: > - _GZIP used instead of GZIP > - tar commands altered to use tools from the vars > Changes in v3: > - _BZIP2 used instead of BZIP2 > - _LZOP used instead of LZOP > Changes in v4: > - Unexports removed from Kbuild.include > - MAKEOVERRIDES used in top Makefile > - All variables checks removed from scripts > > Makefile | 25 +++++++++++++++++++++++-- > arch/arm/boot/deflate_xip_data.sh | 2 +- > arch/ia64/Makefile | 2 +- > arch/m68k/Makefile | 8 ++++---- > arch/mips/lasat/image/Makefile | 2 +- > arch/parisc/Makefile | 2 +- > kernel/gen_kheaders.sh | 2 +- > scripts/Makefile.lib | 12 ++++++------ > scripts/Makefile.package | 8 ++++---- > scripts/package/buildtar | 6 +++--- > scripts/xz_wrap.sh | 2 +- > 11 files changed, 46 insertions(+), 25 deletions(-) > > diff --git a/Makefile b/Makefile > index b668725a2a62..9a9cce1ed83d 100644 > --- a/Makefile > +++ b/Makefile > @@ -447,6 +447,26 @@ PYTHON = python > PYTHON3 = python3 > CHECK = sparse > BASH = bash > +GZIP = gzip > +BZIP2 = bzip2 > +LZOP = lzop > +LZMA = lzma > +LZ4 = lz4c > +XZ = xz > + > +# GZIP, BZIP2, LZOP env vars are used by the tools. Support them as the command > +# line interface, but use _GZIP, _BZIP2, _LZOP internally. > +_GZIP := $(GZIP) > +_BZIP2 := $(BZIP2) > +_LZOP := $(LZOP) > + > +# Reset GZIP, BZIP2, LZOP in this Makefile > +override GZIP= > +override BZIP2= > +override LZOP= > + > +# Reset GZIP, BZIP2, LZOP in recursive invocations > +MAKEOVERRIDES += GZIP= BZIP2= LZOP= > > CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ > -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF) > @@ -495,6 +515,7 @@ CLANG_FLAGS := > export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC > export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL > export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX > +export _GZIP _BZIP2 _LZOP LZMA LZ4 XZ > export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE > > export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS > @@ -1005,10 +1026,10 @@ export mod_strip_cmd > mod_compress_cmd = true > ifdef CONFIG_MODULE_COMPRESS > ifdef CONFIG_MODULE_COMPRESS_GZIP > - mod_compress_cmd = gzip -n -f > + mod_compress_cmd = $(_GZIP) -n -f > endif # CONFIG_MODULE_COMPRESS_GZIP > ifdef CONFIG_MODULE_COMPRESS_XZ > - mod_compress_cmd = xz -f > + mod_compress_cmd = $(XZ) -f > endif # CONFIG_MODULE_COMPRESS_XZ > endif # CONFIG_MODULE_COMPRESS > export mod_compress_cmd > diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh > index 40937248cebe..739f0464321e 100755 > --- a/arch/arm/boot/deflate_xip_data.sh > +++ b/arch/arm/boot/deflate_xip_data.sh > @@ -56,7 +56,7 @@ trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3 > # substitute the data section by a compressed version > $DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp" > $DD if="$XIPIMAGE" skip=$data_start iflag=skip_bytes | > -gzip -9 >> "$XIPIMAGE.tmp" > +$_GZIP -9 >> "$XIPIMAGE.tmp" > > # replace kernel binary > mv -f "$XIPIMAGE.tmp" "$XIPIMAGE" > diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile > index 32240000dc0c..f817f3d5e758 100644 > --- a/arch/ia64/Makefile > +++ b/arch/ia64/Makefile > @@ -40,7 +40,7 @@ $(error Sorry, you need a newer version of the assember, one that is built from > endif > > quiet_cmd_gzip = GZIP $@ > -cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@ > +cmd_gzip = cat $(real-prereqs) | $(_GZIP) -n -f -9 > $@ > > quiet_cmd_objcopy = OBJCOPY $@ > cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ > diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile > index 5d9288384096..ce6db5e5a5a3 100644 > --- a/arch/m68k/Makefile > +++ b/arch/m68k/Makefile > @@ -135,10 +135,10 @@ vmlinux.gz: vmlinux > ifndef CONFIG_KGDB > cp vmlinux vmlinux.tmp > $(STRIP) vmlinux.tmp > - gzip -9c vmlinux.tmp >vmlinux.gz > + $(_GZIP) -9c vmlinux.tmp >vmlinux.gz > rm vmlinux.tmp > else > - gzip -9c vmlinux >vmlinux.gz > + $(_GZIP) -9c vmlinux >vmlinux.gz > endif > > bzImage: vmlinux.bz2 > @@ -148,10 +148,10 @@ vmlinux.bz2: vmlinux > ifndef CONFIG_KGDB > cp vmlinux vmlinux.tmp > $(STRIP) vmlinux.tmp > - bzip2 -1c vmlinux.tmp >vmlinux.bz2 > + $(_BZIP2) -1c vmlinux.tmp >vmlinux.bz2 > rm vmlinux.tmp > else > - bzip2 -1c vmlinux >vmlinux.bz2 > + $(_BZIP2) -1c vmlinux >vmlinux.bz2 > endif > > archclean: > diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile > index 78ce4cff1012..24d8dbde1109 100644 > --- a/arch/mips/lasat/image/Makefile > +++ b/arch/mips/lasat/image/Makefile > @@ -44,7 +44,7 @@ $(obj)/%.o: $(obj)/%.gz > $(LD) -r -o $@ -b binary $< > > $(obj)/%.gz: $(obj)/%.bin > - gzip -cf -9 $< > $@ > + $(_GZIP) -cf -9 $< > $@ > > $(obj)/kImage.bin: $(KERNEL_IMAGE) > $(OBJCOPY) -O binary -S $^ $@ > diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile > index 628cd8bb7ad8..e1aa514aeb36 100644 > --- a/arch/parisc/Makefile > +++ b/arch/parisc/Makefile > @@ -162,7 +162,7 @@ vmlinuz: bzImage > $(OBJCOPY) $(boot)/bzImage $@ > else > vmlinuz: vmlinux > - @gzip -cf -9 $< > $@ > + @$(_GZIP) -cf -9 $< > $@ > endif > > install: > diff --git a/kernel/gen_kheaders.sh b/kernel/gen_kheaders.sh > index e13ca842eb7e..c1510f0ab3ea 100755 > --- a/kernel/gen_kheaders.sh > +++ b/kernel/gen_kheaders.sh > @@ -88,7 +88,7 @@ find $cpio_dir -type f -print0 | > find $cpio_dir -printf "./%P\n" | LC_ALL=C sort | \ > tar "${KBUILD_BUILD_TIMESTAMP:+--mtime=$KBUILD_BUILD_TIMESTAMP}" \ > --owner=0 --group=0 --numeric-owner --no-recursion \ > - -Jcf $tarfile -C $cpio_dir/ -T - > /dev/null > + -I $XZ -cf $tarfile -C $cpio_dir/ -T - > /dev/null > > echo $headers_md5 > kernel/kheaders.md5 > echo "$this_file_md5" >> kernel/kheaders.md5 > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib > index 4b799737722c..a1c1424e6b52 100644 > --- a/scripts/Makefile.lib > +++ b/scripts/Makefile.lib > @@ -241,7 +241,7 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ > # --------------------------------------------------------------------------- > > quiet_cmd_gzip = GZIP $@ > - cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@ > + cmd_gzip = cat $(real-prereqs) | $(_GZIP) -n -f -9 > $@ > > # DTC > # --------------------------------------------------------------------------- > @@ -334,19 +334,19 @@ printf "%08x\n" $$dec_size | \ > ) > > quiet_cmd_bzip2 = BZIP2 $@ > - cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9; $(size_append); } > $@ > + cmd_bzip2 = { cat $(real-prereqs) | $(_BZIP2) -9; $(size_append); } > $@ > > # Lzma > # --------------------------------------------------------------------------- > > quiet_cmd_lzma = LZMA $@ > - cmd_lzma = { cat $(real-prereqs) | lzma -9; $(size_append); } > $@ > + cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@ > > quiet_cmd_lzo = LZO $@ > - cmd_lzo = { cat $(real-prereqs) | lzop -9; $(size_append); } > $@ > + cmd_lzo = { cat $(real-prereqs) | $(_LZOP) -9; $(size_append); } > $@ > > quiet_cmd_lz4 = LZ4 $@ > - cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout; \ > + cmd_lz4 = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \ > $(size_append); } > $@ > > # U-Boot mkimage > @@ -393,7 +393,7 @@ quiet_cmd_xzkern = XZKERN $@ > $(size_append); } > $@ > > quiet_cmd_xzmisc = XZMISC $@ > - cmd_xzmisc = cat $(real-prereqs) | xz --check=crc32 --lzma2=dict=1MiB > $@ > + cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@ > > # ASM offsets > # --------------------------------------------------------------------------- > diff --git a/scripts/Makefile.package b/scripts/Makefile.package > index 02135d2671a6..b2b6153af63a 100644 > --- a/scripts/Makefile.package > +++ b/scripts/Makefile.package > @@ -45,7 +45,7 @@ if test "$(objtree)" != "$(srctree)"; then \ > false; \ > fi ; \ > $(srctree)/scripts/setlocalversion --save-scmversion; \ > -tar -cz $(RCS_TAR_IGNORE) -f $(2).tar.gz \ > +tar -I $(_GZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ > --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \ > rm -f $(objtree)/.scmversion > > @@ -127,9 +127,9 @@ util/PERF-VERSION-GEN $(CURDIR)/$(perf-tar)/); \ > tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \ > rm -r $(perf-tar); \ > $(if $(findstring tar-src,$@),, \ > -$(if $(findstring bz2,$@),bzip2, \ > -$(if $(findstring gz,$@),gzip, \ > -$(if $(findstring xz,$@),xz, \ > +$(if $(findstring bz2,$@),$(_BZIP2), \ > +$(if $(findstring gz,$@),$(_GZIP), \ > +$(if $(findstring xz,$@),$(XZ), \ > $(error unknown target $@)))) \ > -f -9 $(perf-tar).tar) > > diff --git a/scripts/package/buildtar b/scripts/package/buildtar > index 77c7caefede1..ad62c6879622 100755 > --- a/scripts/package/buildtar > +++ b/scripts/package/buildtar > @@ -28,15 +28,15 @@ case "${1}" in > opts= > ;; > targz-pkg) > - opts=--gzip > + opts="-I ${_GZIP}" > tarball=${tarball}.gz > ;; > tarbz2-pkg) > - opts=--bzip2 > + opts="-I ${_BZIP2}" > tarball=${tarball}.bz2 > ;; > tarxz-pkg) > - opts=--xz > + opts="-I ${XZ}" > tarball=${tarball}.xz > ;; > *) > diff --git a/scripts/xz_wrap.sh b/scripts/xz_wrap.sh > index 7a2d372f4885..76e9cbcfbeab 100755 > --- a/scripts/xz_wrap.sh > +++ b/scripts/xz_wrap.sh > @@ -20,4 +20,4 @@ case $SRCARCH in > sparc) BCJ=--sparc ;; > esac > > -exec xz --check=crc32 $BCJ --lzma2=$LZMA2OPTS,dict=32MiB > +exec $XZ --check=crc32 $BCJ --lzma2=$LZMA2OPTS,dict=32MiB > -- > 2.26.2 >
diff --git a/Makefile b/Makefile index b668725a2a62..9a9cce1ed83d 100644 --- a/Makefile +++ b/Makefile @@ -447,6 +447,26 @@ PYTHON = python PYTHON3 = python3 CHECK = sparse BASH = bash +GZIP = gzip +BZIP2 = bzip2 +LZOP = lzop +LZMA = lzma +LZ4 = lz4c +XZ = xz + +# GZIP, BZIP2, LZOP env vars are used by the tools. Support them as the command +# line interface, but use _GZIP, _BZIP2, _LZOP internally. +_GZIP := $(GZIP) +_BZIP2 := $(BZIP2) +_LZOP := $(LZOP) + +# Reset GZIP, BZIP2, LZOP in this Makefile +override GZIP= +override BZIP2= +override LZOP= + +# Reset GZIP, BZIP2, LZOP in recursive invocations +MAKEOVERRIDES += GZIP= BZIP2= LZOP= CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF) @@ -495,6 +515,7 @@ CLANG_FLAGS := export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX +export _GZIP _BZIP2 _LZOP LZMA LZ4 XZ export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS @@ -1005,10 +1026,10 @@ export mod_strip_cmd mod_compress_cmd = true ifdef CONFIG_MODULE_COMPRESS ifdef CONFIG_MODULE_COMPRESS_GZIP - mod_compress_cmd = gzip -n -f + mod_compress_cmd = $(_GZIP) -n -f endif # CONFIG_MODULE_COMPRESS_GZIP ifdef CONFIG_MODULE_COMPRESS_XZ - mod_compress_cmd = xz -f + mod_compress_cmd = $(XZ) -f endif # CONFIG_MODULE_COMPRESS_XZ endif # CONFIG_MODULE_COMPRESS export mod_compress_cmd diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh index 40937248cebe..739f0464321e 100755 --- a/arch/arm/boot/deflate_xip_data.sh +++ b/arch/arm/boot/deflate_xip_data.sh @@ -56,7 +56,7 @@ trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3 # substitute the data section by a compressed version $DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp" $DD if="$XIPIMAGE" skip=$data_start iflag=skip_bytes | -gzip -9 >> "$XIPIMAGE.tmp" +$_GZIP -9 >> "$XIPIMAGE.tmp" # replace kernel binary mv -f "$XIPIMAGE.tmp" "$XIPIMAGE" diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 32240000dc0c..f817f3d5e758 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -40,7 +40,7 @@ $(error Sorry, you need a newer version of the assember, one that is built from endif quiet_cmd_gzip = GZIP $@ -cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@ +cmd_gzip = cat $(real-prereqs) | $(_GZIP) -n -f -9 > $@ quiet_cmd_objcopy = OBJCOPY $@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index 5d9288384096..ce6db5e5a5a3 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -135,10 +135,10 @@ vmlinux.gz: vmlinux ifndef CONFIG_KGDB cp vmlinux vmlinux.tmp $(STRIP) vmlinux.tmp - gzip -9c vmlinux.tmp >vmlinux.gz + $(_GZIP) -9c vmlinux.tmp >vmlinux.gz rm vmlinux.tmp else - gzip -9c vmlinux >vmlinux.gz + $(_GZIP) -9c vmlinux >vmlinux.gz endif bzImage: vmlinux.bz2 @@ -148,10 +148,10 @@ vmlinux.bz2: vmlinux ifndef CONFIG_KGDB cp vmlinux vmlinux.tmp $(STRIP) vmlinux.tmp - bzip2 -1c vmlinux.tmp >vmlinux.bz2 + $(_BZIP2) -1c vmlinux.tmp >vmlinux.bz2 rm vmlinux.tmp else - bzip2 -1c vmlinux >vmlinux.bz2 + $(_BZIP2) -1c vmlinux >vmlinux.bz2 endif archclean: diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile index 78ce4cff1012..24d8dbde1109 100644 --- a/arch/mips/lasat/image/Makefile +++ b/arch/mips/lasat/image/Makefile @@ -44,7 +44,7 @@ $(obj)/%.o: $(obj)/%.gz $(LD) -r -o $@ -b binary $< $(obj)/%.gz: $(obj)/%.bin - gzip -cf -9 $< > $@ + $(_GZIP) -cf -9 $< > $@ $(obj)/kImage.bin: $(KERNEL_IMAGE) $(OBJCOPY) -O binary -S $^ $@ diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 628cd8bb7ad8..e1aa514aeb36 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -162,7 +162,7 @@ vmlinuz: bzImage $(OBJCOPY) $(boot)/bzImage $@ else vmlinuz: vmlinux - @gzip -cf -9 $< > $@ + @$(_GZIP) -cf -9 $< > $@ endif install: diff --git a/kernel/gen_kheaders.sh b/kernel/gen_kheaders.sh index e13ca842eb7e..c1510f0ab3ea 100755 --- a/kernel/gen_kheaders.sh +++ b/kernel/gen_kheaders.sh @@ -88,7 +88,7 @@ find $cpio_dir -type f -print0 | find $cpio_dir -printf "./%P\n" | LC_ALL=C sort | \ tar "${KBUILD_BUILD_TIMESTAMP:+--mtime=$KBUILD_BUILD_TIMESTAMP}" \ --owner=0 --group=0 --numeric-owner --no-recursion \ - -Jcf $tarfile -C $cpio_dir/ -T - > /dev/null + -I $XZ -cf $tarfile -C $cpio_dir/ -T - > /dev/null echo $headers_md5 > kernel/kheaders.md5 echo "$this_file_md5" >> kernel/kheaders.md5 diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 4b799737722c..a1c1424e6b52 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -241,7 +241,7 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ # --------------------------------------------------------------------------- quiet_cmd_gzip = GZIP $@ - cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@ + cmd_gzip = cat $(real-prereqs) | $(_GZIP) -n -f -9 > $@ # DTC # --------------------------------------------------------------------------- @@ -334,19 +334,19 @@ printf "%08x\n" $$dec_size | \ ) quiet_cmd_bzip2 = BZIP2 $@ - cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9; $(size_append); } > $@ + cmd_bzip2 = { cat $(real-prereqs) | $(_BZIP2) -9; $(size_append); } > $@ # Lzma # --------------------------------------------------------------------------- quiet_cmd_lzma = LZMA $@ - cmd_lzma = { cat $(real-prereqs) | lzma -9; $(size_append); } > $@ + cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@ quiet_cmd_lzo = LZO $@ - cmd_lzo = { cat $(real-prereqs) | lzop -9; $(size_append); } > $@ + cmd_lzo = { cat $(real-prereqs) | $(_LZOP) -9; $(size_append); } > $@ quiet_cmd_lz4 = LZ4 $@ - cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout; \ + cmd_lz4 = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \ $(size_append); } > $@ # U-Boot mkimage @@ -393,7 +393,7 @@ quiet_cmd_xzkern = XZKERN $@ $(size_append); } > $@ quiet_cmd_xzmisc = XZMISC $@ - cmd_xzmisc = cat $(real-prereqs) | xz --check=crc32 --lzma2=dict=1MiB > $@ + cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@ # ASM offsets # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.package b/scripts/Makefile.package index 02135d2671a6..b2b6153af63a 100644 --- a/scripts/Makefile.package +++ b/scripts/Makefile.package @@ -45,7 +45,7 @@ if test "$(objtree)" != "$(srctree)"; then \ false; \ fi ; \ $(srctree)/scripts/setlocalversion --save-scmversion; \ -tar -cz $(RCS_TAR_IGNORE) -f $(2).tar.gz \ +tar -I $(_GZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \ rm -f $(objtree)/.scmversion @@ -127,9 +127,9 @@ util/PERF-VERSION-GEN $(CURDIR)/$(perf-tar)/); \ tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \ rm -r $(perf-tar); \ $(if $(findstring tar-src,$@),, \ -$(if $(findstring bz2,$@),bzip2, \ -$(if $(findstring gz,$@),gzip, \ -$(if $(findstring xz,$@),xz, \ +$(if $(findstring bz2,$@),$(_BZIP2), \ +$(if $(findstring gz,$@),$(_GZIP), \ +$(if $(findstring xz,$@),$(XZ), \ $(error unknown target $@)))) \ -f -9 $(perf-tar).tar) diff --git a/scripts/package/buildtar b/scripts/package/buildtar index 77c7caefede1..ad62c6879622 100755 --- a/scripts/package/buildtar +++ b/scripts/package/buildtar @@ -28,15 +28,15 @@ case "${1}" in opts= ;; targz-pkg) - opts=--gzip + opts="-I ${_GZIP}" tarball=${tarball}.gz ;; tarbz2-pkg) - opts=--bzip2 + opts="-I ${_BZIP2}" tarball=${tarball}.bz2 ;; tarxz-pkg) - opts=--xz + opts="-I ${XZ}" tarball=${tarball}.xz ;; *) diff --git a/scripts/xz_wrap.sh b/scripts/xz_wrap.sh index 7a2d372f4885..76e9cbcfbeab 100755 --- a/scripts/xz_wrap.sh +++ b/scripts/xz_wrap.sh @@ -20,4 +20,4 @@ case $SRCARCH in sparc) BCJ=--sparc ;; esac -exec xz --check=crc32 $BCJ --lzma2=$LZMA2OPTS,dict=32MiB +exec $XZ --check=crc32 $BCJ --lzma2=$LZMA2OPTS,dict=32MiB
Allow user to use alternative implementations of compression tools, such as pigz, pbzip2, pxz. For example, multi-threaded tools to speed up the build: $ make GZIP=pigz BZIP2=pbzip2 Variables _GZIP, _BZIP2, _LZOP are used internally because original env vars are reserved by the tools. The use of GZIP in gzip tool is obsolete since 2015. However, alternative implementations (e.g., pigz) still rely on it. BZIP2, BZIP, LZOP vars are not obsolescent. The credit goes to @grsecurity. As a sidenote, for multi-threaded lzma, xz compression one can use: $ export XZ_OPT="--threads=0" Signed-off-by: Denis Efremov <efremov@linux.com> --- Changes in v2: - _GZIP used instead of GZIP - tar commands altered to use tools from the vars Changes in v3: - _BZIP2 used instead of BZIP2 - _LZOP used instead of LZOP Changes in v4: - Unexports removed from Kbuild.include - MAKEOVERRIDES used in top Makefile - All variables checks removed from scripts Makefile | 25 +++++++++++++++++++++++-- arch/arm/boot/deflate_xip_data.sh | 2 +- arch/ia64/Makefile | 2 +- arch/m68k/Makefile | 8 ++++---- arch/mips/lasat/image/Makefile | 2 +- arch/parisc/Makefile | 2 +- kernel/gen_kheaders.sh | 2 +- scripts/Makefile.lib | 12 ++++++------ scripts/Makefile.package | 8 ++++---- scripts/package/buildtar | 6 +++--- scripts/xz_wrap.sh | 2 +- 11 files changed, 46 insertions(+), 25 deletions(-)