@@ -973,8 +973,8 @@ KBUILD_CPPFLAGS += $(KCPPFLAGS)
KBUILD_AFLAGS += $(KAFLAGS)
KBUILD_CFLAGS += $(KCFLAGS)
-KBUILD_LDFLAGS_MODULE += --build-id
-LDFLAGS_vmlinux += --build-id
+KBUILD_LDFLAGS_MODULE += --build-id=sha1
+LDFLAGS_vmlinux += --build-id=sha1
ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
LDFLAGS_vmlinux += $(call ld-option, -X,)
@@ -19,7 +19,7 @@ ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO32
ldflags-$(CONFIG_CPU_ENDIAN_BE8) := --be8
ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \
-z max-page-size=4096 -nostdlib -shared $(ldflags-y) \
- --hash-style=sysv --build-id \
+ --hash-style=sysv --build-id=sha1 \
-T
obj-$(CONFIG_VDSO) += vdso.o
@@ -24,7 +24,7 @@ btildflags-$(CONFIG_ARM64_BTI_KERNEL) += -z force-bti
# routines, as x86 does (see 6f121e548f83 ("x86, vdso: Reimplement vdso.so
# preparation in build-time C")).
ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \
- -Bsymbolic $(call ld-option, --no-eh-frame-hdr) --build-id -n \
+ -Bsymbolic $(call ld-option, --no-eh-frame-hdr) --build-id=sha1 -n \
$(btildflags-y) -T
ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
@@ -128,7 +128,7 @@ VDSO_LDFLAGS += -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1
VDSO_LDFLAGS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
VDSO_LDFLAGS += -nostdlib -shared -mfloat-abi=soft
VDSO_LDFLAGS += -Wl,--hash-style=sysv
-VDSO_LDFLAGS += -Wl,--build-id
+VDSO_LDFLAGS += -Wl,--build-id=sha1
VDSO_LDFLAGS += $(call cc32-ldoption,-fuse-ld=bfd)
@@ -61,7 +61,7 @@ endif
# VDSO linker flags.
ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \
$(filter -E%,$(KBUILD_CFLAGS)) -nostdlib -shared \
- -G 0 --eh-frame-hdr --hash-style=sysv --build-id -T
+ -G 0 --eh-frame-hdr --hash-style=sysv --build-id=sha1 -T
CFLAGS_REMOVE_vdso.o = -pg
@@ -49,7 +49,7 @@ $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
# refer to these symbols in the kernel code rather than hand-coded addresses.
SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
- -Wl,--build-id -Wl,--hash-style=both
+ -Wl,--build-id=sha1 -Wl,--hash-style=both
$(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
$(call if_changed,vdsold)
@@ -19,7 +19,7 @@ KBUILD_AFLAGS_64 += -m64 -s
KBUILD_CFLAGS_64 := $(filter-out -m64,$(KBUILD_CFLAGS))
KBUILD_CFLAGS_64 += -m64 -fPIC -shared -fno-common -fno-builtin
ldflags-y := -fPIC -shared -nostdlib -soname=linux-vdso64.so.1 \
- --hash-style=both --build-id -T
+ --hash-style=both --build-id=sha1 -T
$(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_64)
$(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_64)
@@ -115,7 +115,7 @@ quiet_cmd_vdso = VDSO $@
-T $(filter %.lds,$^) $(filter %.o,$^) && \
sh $(srctree)/$(src)/checkundef.sh '$(OBJDUMP)' '$@'
-VDSO_LDFLAGS = -shared --hash-style=both --build-id -Bsymbolic
+VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 -Bsymbolic
GCOV_PROFILE := n
#
@@ -176,7 +176,7 @@ quiet_cmd_vdso = VDSO $@
-T $(filter %.lds,$^) $(filter %.o,$^) && \
sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
-VDSO_LDFLAGS = -shared --hash-style=both --build-id \
+VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 \
$(call ld-option, --eh-frame-hdr) -Bsymbolic
GCOV_PROFILE := n
@@ -133,7 +133,7 @@ $(OUTPUT)/%:%.c
$(OUTPUT)/urandom_read: urandom_read.c
$(call msg,BINARY,,$@)
- $(Q)$(CC) $(LDFLAGS) -o $@ $< $(LDLIBS) -Wl,--build-id
+ $(Q)$(CC) $(LDFLAGS) -o $@ $< $(LDLIBS) -Wl,--build-id=sha1
$(OUTPUT)/test_stub.o: test_stub.c $(BPFOBJ)
$(call msg,CC,,$@)
ld's --build-id defaults to "sha1" style, while lld defaults to "fast". The build IDs are very different between the two, which may confuse programs that reference them. Signed-off-by: Bill Wendling <morbo@google.com> --- Makefile | 4 ++-- arch/arm/vdso/Makefile | 2 +- arch/arm64/kernel/vdso/Makefile | 2 +- arch/arm64/kernel/vdso32/Makefile | 2 +- arch/mips/vdso/Makefile | 2 +- arch/riscv/kernel/vdso/Makefile | 2 +- arch/s390/kernel/vdso64/Makefile | 2 +- arch/sparc/vdso/Makefile | 2 +- arch/x86/entry/vdso/Makefile | 2 +- tools/testing/selftests/bpf/Makefile | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-)